Abstract:In this work, a new aqueous rechargeable Na-ion battery is developed based on all NASICON structured electrodes in which NaTi2(PO4)(3) serves as the anode, Na3V2(PO4)(3) serves as the cathode, and aqueous Na2SO4 solution serves as the electrolyte. Such a combination of cathode-anode can fulfil the theoretical working window of aqueous electrolyte, thus give rise to a high cell voltage surpassing most of the previous aqueous Na-ion batteries. The developed NaTi2(PO4)(3)/Na3V2(PO4)(3) aqueous full cell demonstrates a flat discharge plateau at 1.2 V and can well maintain its performance at high current rates. Even at a current density of 10 A g(-1), the battery discharge capacity can still reach 58 mAh g(-1). Together with a high voltage, this cell configuration enables a high energy density of 29 Wh kg(-1) at a power density of 5145 W kg(-1). The NaTi2(PO4)(3)/Na3V2(PO4)(3) system can be a promising low cost alternative for the current aqueous secondary batteries especially in terms of the high voltage and high power application. By controlling the cut-off voltage and adjusting the mass ratio of cathode to anode, we explored the different electrochemical performances of the aqueous full cell and identify which side of the electrode dominantly affects the cell decay at the case of full utilizing one electrode material. This investigation may present useful insight to researchers working on both aqueous batteries and NASICONbased materials. (C) 2016 Elsevier Ltd. All rights reserved.

Energetic Aqueous Rechargeable Sodium‐Ion Battery Based on Na2CuFe(CN)6–NaTi2(PO4)3 Intercalation Chemistry

An All‐Prussian‐Blue‐Based Aqueous Sodium‐Ion Battery

Na2Fe(SO4)(2): an anhydrous 3.6 V, low-cost and good-safety cathode for a rechargeable sodium-ion battery

High-performance aqueous symmetric sodium-ion battery using NASICON-structured Na 2 VTi(PO 4 ) 3

Aqueous Rechargeable Li+/Na+Hybrid Ion Battery with High Energy Density and Long Cycle Life

An aqueous rechargeable sodium ion battery based on a NaMnO2–NaTi2(PO4)3 hybrid system for stationary energy storage

Cost-effective, long-term aqueous rechargeable hybrid sodium/zinc batteries based on Zn anode and Na3MnTi(PO4)3 cathode

A promising cathode material of sodium iron–nickel hexacyanoferrate for sodium ion batteries

A High Rate 1.2V Aqueous Sodium-ion Battery Based on All NASICON Structured NaTi2(PO4)3 and Na3V2(PO4)3

A Zero-Strain Na-deficient NASICON-type Na2.8Mn0.4V1.0Ti0.6(PO4)3 Cathode for Wide-Temperature Rechargeable Na-ion Batteries

Aqueous Zinc–sodium Hybrid Battery Based on High Crystallinity Sodium–iron Hexacyanoferrate

Bipolar electrode architecture enables high-energy aqueous rechargeable sodium ion battery

A Metal-Organic Compound as Cathode Material with Superhigh Capacity Achieved by Reversible Cationic and Anionic Redox Chemistry for High-Energy Sodium-Ion Batteries.

A High Capacity, Good Safety and Low Cost Na2FeSiO4-Based Cathode for Rechargeable Sodium-Ion Battery.

Towards High‐Performance Aqueous Sodium Ion Batteries: Constructing Hollow NaTi2(PO4)3@C Nanocube Anode with Zn Metal‐Induced Pre‐Sodiation and Deep Eutectic Electrolyte

Design and Performance of Rechargeable Sodium Ion Batteries, and Symmetrical Li‐Ion Batteries with Supercapacitor‐Like Power Density Based Upon Polyoxovanadates

Hydrothermal-assisted synthesis of the Na7V4(P2O7)4(PO4)/C nanorod and its fast sodium intercalation chemistry in aqueous rechargeable sodium batteries

A High Rate and Stable Hybrid Li/Na‐Ion Battery Based on a Hydrated Molten Inorganic Salt Electrolyte

High-Rate and High-Voltage Aqueous Rechargeable Zinc Ammonium Hybrid Battery from Selective Cation Intercalation Cathode

Refined Electrolyte and Interfacial Chemistry toward Realization of High-Energy Anode-Free Rechargeable Sodium Batteries

An Aqueous Rechargeable Copper Ammonium Hybrid Battery with Good Cycling Performance