Abstract:The development of aqueous sodium-ion batteries (ASIBs) has been greatly restricted as a result of their narrow electrochemical stability window (ESW) (about 1.23 V). Many researchers attempt to expand the ESW using high concentrations of electrolyte solution or choosing titanium or other inert materials as collectors. However, these methods would lead to higher battery costs. In this work, we demonstrated a low-cost ASIB system, in which the cathode, anode, and electrolyte solution were applied by graphene oxide (GO)-modified Na2MnFe(CN)6 (PBM), zinc sheet, and solution of Na2SO4 (1 M) and ZnSO4 (1 M), respectively. When the graphite sheet with high hydrogen and oxygen evolution overpotential was used as the collector, the ESW was expanded to about 3.4 V. The full cell owned a stable discharge platform and high discharge potential (∼1.8 V). Furthermore, the modification of PBM by reduced graphene oxide (rGO) obviously increased the discharge capacity to 110 mAh g–1, extended the cycle life (91% capacity retention after 200 cycles), and greatly improved the rate capacity (76% capacity for 500 mA g–1 rate). It should also be noted that the full cell consisting of a rGO/PBM cathode and zinc anode could achieve an energy density as high as 165 Wh kg–1.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.1c01095?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c01095</a>.Mechanism of the chemistry of the ASIB (Figure S1), cyclic voltammograms of PBM at a scan rate of 1.0 mV/s at the voltage range of 0.2–1.2 V (Figure S2), and SEM images of rGO/PBM after charging and discharging cycles and XRD pattern of rGO/PBM and rGO/PBM after charging and discharging cycles (Figure S3) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c01095/suppl_file/ef1c01095_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Bipolar electrode architecture enables high-energy aqueous rechargeable sodium ion battery

Towards High‐Performance Aqueous Sodium Ion Batteries: Constructing Hollow NaTi2(PO4)3@C Nanocube Anode with Zn Metal‐Induced Pre‐Sodiation and Deep Eutectic Electrolyte

High-performance aqueous symmetric sodium-ion battery using NASICON-structured Na 2 VTi(PO 4 ) 3

High-Performance Aqueous Sodium-Ion Batteries with Hydrogel Electrolyte and Alloxazine/CMK-3 Anode

Aqueous Rechargeable Li+/Na+Hybrid Ion Battery with High Energy Density and Long Cycle Life

Aqueous electrolyte with moderate concentration enables high-energy aqueous rechargeable lithium ion battery for large scale energy storage

Conversion Synthesis of Self-Standing Potassium Zinc Hexacyanoferrate Arrays As Cathodes for High-Voltage Flexible Aqueous Rechargeable Sodium-Ion Batteries.

High-Performance Aqueous Sodium-Ion Battery Based on Graphene-Doped Na 2 MnFe(CN) 6 –Zinc with a Highly Stable Discharge Platform and Wide Electrochemical Stability

Advanced Low-Cost, High-Voltage, Long-Life Aqueous Hybrid Sodium/Zinc Batteries Enabled by a Dendrite-Free Zinc Anode and Concentrated Electrolyte.

A Class of Liquid Anode for Rechargeable Batteries with Ultralong Cycle Life.

Cost-effective, long-term aqueous rechargeable hybrid sodium/zinc batteries based on Zn anode and Na3MnTi(PO4)3 cathode

Aqueous Dual-Electrolyte Full-Cell System for Improving Energy Density of Sodium-Ion Batteries

Electropolymerized Organic N/P Bipolar Cathode Toward High Energy and High Power Density Sodium Dual-Ion Batteries

Ba-doped Na0.16MnO2 with Ultra-Long Cycling Life and Highly Reversible Insertion/extraction Mechanism for Aqueous Rechargeable Sodium Ion Batteries

A Synergistic Strategy of Organic Molecules Introduced a High Zn2+ Flux Solid Electrolyte Interphase for Stable Aqueous Zinc-Ion Batteries.

Engineering of Polyanion Type Cathode Materials for Sodium‐Ion Batteries: Toward Higher Energy/Power Density

Facile Ion Diffusion and High Electrical Conductivity Enable High-Energy and High-Power Sodium-Ion Batteries from a Layered Metal-Free Cathode

High-Performant All-Organic Aqueous Sodium-Ion Batteries Enabled by PTCDA Electrodes and a Hybrid Na/Mg Electrolyte

Building a Beyond Concentrated Electrolyte for High‐Voltage Anode‐Free Rechargeable Sodium Batteries

High-Energy Aqueous Sodium-Ion Batteries

High-Rate and High-Voltage Aqueous Rechargeable Zinc Ammonium Hybrid Battery from Selective Cation Intercalation Cathode