Abstract:MnO has attracted much attention as the anode for Li-ion batteries (LIBs) owing to its high specific capacity. However, the low conductivity limited its large application. An effective solution to solve this problem is carbon coating. Biomass carbon materials have aroused much interest for being low-cost and rich in functional groups and hetero atoms. This work designs porous N-containing MnO composites based on the chemical-activated tremella using a self-templated method. The tremella, after activation, could offer more active sites for carbon to coordinate with the Mn ions. And the as-prepared composites could also inherit the special porous nanostructures of the tremella, which is beneficial for Li+ transfer. Moreover, the pyrrolic/pyridinic N from the tremella can further improve the conductivity and the electrolyte wettability of the composites. Finally, the composites show a high reversible specific capacity of 1000 mAh g−1 with 98% capacity retention after 200 cycles at 100 mA g−1. They also displayed excellent long-cycle performance with 99% capacity retention (relative to the capacity second cycle) after long 1000 cycles under high current density, which is higher than in most reported transition metal oxide anodes. Above all, this study put forward an efficient and convenient strategy based on the low-cost biomass to construct N-containing porous composite anodes with a fast Li+ diffusion rate, high electronic conductivity, and outstanding structure stability.

MnO-carbon hybrid nanofiber composites as superior anode materials for lithium-ion batteries

Mn0.5Co2.5O4 Nanofibers Intercalated into Graphene Frameworks with Mesoporous Structure for Batteries and Supercapacitors

MnFe2O4-graphene nanocomposites with enhanced performances as anode materials for Li-ion batteries.

Mno@1-D Carbon Composites from the Precursor C4h4mno6 and Their High-Performance in Lithium Batteries

Membranes of MnO Beading in Carbon Nanofibers as Flexible Anodes for High-Performance Lithium-Ion Batteries

Chemical Vapor Deposition-Assisted Fabrication of Self-Assembled Co/MnO@C Composite Nanofibers As Advanced Anode Materials for High-Capacity Li-Ion Batteries

Tailoring carboxyl tubular carbon nanofibers/MnO 2 composites for high‐performance lithium‐ion battery anodes

Three-dimensional cross-linked MnO/Sb hybrid nanowires co-embedded nitrogen-doped carbon tubes as high-performance anode materials for lithium-ion batteries

High-performance lithium-ion battery anodes based on Mn3O4/nitrogen-doped porous carbon hybrid structures

A Cellulose-Derived Nanofibrous MnO2-TiO2-Carbon Composite As Anodic Material for Lithium-Ion Batteries

MOF-derived ultrafine MnO nanocrystals embedded in a porous carbon matrix as high-performance anodes for lithium-ion batteries

MOF-derived MnO/C composites as high-performance lithium-ion battery anodes

The composite rods of MnO and multi-walled carbon nanotubes as anode materials for lithium ion batteries

Metal-Organic Framework Derived MnO/Carbon Cloth Loaded by MnO Nanoparticles as a High-Performance Self-Supporting Anode for Lithium-Ion Batteries

A Facile Route to Synthesize Nano-Mno/c Composites and Their Application in Lithium Ion Batteries

Facile Route to Biomass-Derived 1D Carbon Fiber Supported High-Performance MnO-based Nanocomposite Anode Material

N-Containing Porous Carbon-Based MnO Composites as Anode with High Capacity and Stability for Lithium-Ion Batteries

Synthesis of MnO–Sn cubes embedding in nitrogen-doped carbon nanofibers with high lithium-ion storage performance

Fe2O3-MWNTs Composite with Reinforced Concrete Structure as High-performance Anode Material for Lithium-ion Batteries

High Rate Hybrid MnO2@CNT Fabric Anode for Li-Ion Batteries: Properties and Lithium Storage Mechanism by In-Situ Synchrotron X-Ray Scattering

Mn_3O_4 Nanosheet and GNS– Mn_3O_4 Composite as High-Performance Anode Materials for Lithium-Ion Batteries