Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

Study on the Temperature Drift Adaptive Compensation Algorithm of A Magneto-Electric Encoder Based on A Simple Neuron

Research on the Temperature Characteristic of Magnetic Sensor in the Magnetic Drift Compensation Fiber-Optic Gyroscope

Study on single neuron compensation method in network synchronization

Temperature Compensation of Elasto-Magneto-Electric (EME) Sensors in Cable Force Monitoring Using BP Neural Network

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

Temperature Bias Drift Phase-Based Compensation for a MEMS Accelerometer with Stiffness-Tuning Double-Sided Parallel Plate Capacitors

Research of neural network-based model for nonlinear temperature drift compensation of MEMS accelerometers

A compensation approach for magnetic encoder error based on improved deep belief network algorithm

Study on High Precision Magnetic Encoder Based on Pmsm Sensorless Control

Study on High Precision Magnetic Encoder Based on the Arctangent Cross-Intervals Tabulation Method

Temperature Drift Compensation for Inclinometer Sensors Based on Kalman Filtering and Neural Networks

Improving the Accuracy of Multipole Magnetic Encoder by Three-Phase Hall

Temperature Drift Compensation of a MEMS Accelerometer Based on DLSTM and ISSA

High-precision magnetic encoder module design based on real-time error compensation algorithm

Automatic Drift Compensation Using Phase Correlation Method for Nanomanipulation

Research on Suppression Method of Jump Points for Multipole Magnetic Encoder Based on Fuzzy Logic and Ant Colony Optimization

Temperature Error Compensation for Sensors Based on Neural Network Fusion

Study on Compensation Method of Encoder Pulse Errors for Permanent Magnet Synchronous Motor Control

Simultaneous Temperature Drift Compensation for Eddy Current Displacement Sensors Used in Magnetically Levitated Rotor

The Analyses of MEMS Pressure Sensor Temperature Drift and the Design of Compensated Circuit

Three robust temperature-drift compensation strategies for a MEMS gravimeter