Abstract:Despite intensive attempts to fabricate polypyrrole nanoparticles (PPy-NPs) incorporated nanofibrous scaffolds, a low-cost facile strategy is still demanded. Herein, we developed a novel strategy- in-situ polymerization of PPy-NPs and immobilized them into the PCL polymeric matrix in a single step. For the in-situ polymerization of PPy-NPs, ferric chloride hexahydrate (FeCl3.6H2O) was introduced as an oxidant into the blended solution of PCL and pyrrole monomers. Due to the chemical oxidative polymerization process, the clear solution changed into a black PCL/PPy solution. After electrospinning the solution, PCL/PPy composite nanofibers were fabricated. The immobilization of PPy-NPs into PCL matrix was clearly revealed by Bio-TEM images. The Field emission scanning electron microscopy (FESEM) results exhibited that the PCL/PPy scaffolds showed significantly decreased fiber diameter. The atomic force microscopy (AFM) study showed increased surface roughness in the PCL/PPy scaffolds. The mechanical strength test of PCL/PPy scaffolds showed improved Young's Modulus (YM = 2 to 4-folds) and tensile strength (TS = 3 to 4-folds). As well as the YM and TS were gradually increased with increased concentration of PPy-NPs in composite scaffolds. The conductivity measurement conducted on polymeric solution and electrospun scaffolds showed an increasing trend of conductive property in the PCL/PPy solution and scaffolds too. The surface wettability test exhibited decreased water contact angle measurement from 126° for pure PCL to 93° for the PCL/PPy-200 composite scaffold. The biomineralization test conducted by simulated body fluid (SBF) incubation showed enhanced calcium-phosphate crystal deposition on the PCL/PPy scaffolds. The CCK-8 assay and confocal laser scanning microscopic (CLSM) imaging conducted without and with electrical stimulation (ES) displayed enhanced cell adhesion, growth, and proliferation of MC3T3-E1 cells on the PCL/PPy conductive scaffolds. Furthermore, ALP and ARS staining assays showed significant enhancement of the calcium-phosphate deposition on the PCL/PPy scaffolds after ES treatment. Hence, the current study provides a novel strategy for the fabrication of PCL/PPy conductive scaffolds with enhanced bioactivity, biocompatibility, and osteogenic differentiation under electrical stimulation confirmed its promising application towards bone tissue engineering.

Molecularly Engineered Biodegradable Polymer Networks with a Wide Range of Stiffness for Bone and Peripheral Nerve Regeneration

Engineering cartilage tissue based on cartilage-derived extracellular matrix cECM/PCL hybrid nanofibrous scaffold

Photo-cross-linked Hybrid Polymer Networks Consisting of Poly(propylene Fumarate) and Poly(caprolactone Fumarate): Controlled Physical Properties and Regulated Bone and Nerve Cell Responses.

Photo-crosslinked poly(ε-caprolactone fumarate) networks for guided peripheral nerve regeneration: Material properties and preliminary biological evaluations

Functional Peg-Plla Networks for Dental Bone Repair: Effect of Network Chemistry on Properties and Performance

Fabrication and evaluation of 3D printed poly(l-lactide) copolymer scaffolds for bone tissue engineering

Injectable and Biodegradable Nanohybrid Polymers with Simultaneously Enhanced Stiffness and Toughness for Bone Repair

The Enhanced Osteogenesis and Osteointegration of 3-DP PCL Scaffolds Via Structural and Functional Optimization Using Collagen Networks.

Physicochemical Characterisation of Novel Ultra-Thin Biodegradable Scaffolds for Peripheral Nerve Repair

Enhanced Bone Cell Functions on Poly(ε-Caprolactone) Triacrylate Networks Grafted with Polyhedral Oligomeric Silsesquioxane Nanocages

Tuning Nerve Cell Functions on Distinct Polymer Networks with Controllable Mechanical Properties

A strategy to tailor the mechanical and degradation properties of PCL-PEG-PCL based copolymers for biomedical application

Bioinspired Design of Polycaprolactone Composite Nanofibers As Artificial Bone Extracellular Matrix for Bone Regeneration Application.

High-Precision Flexible Fabrication of Tissue Engineering Scaffolds Using Distinct Polymers

Lubricated Biodegradable Polymer Networks for Regulating Nerve Cell Behavior and Fabricating Nerve Conduits with a Compositional Gradient

A Waterborne Polyurethane 3D Scaffold Containing PLGA with a Controllable Degradation Rate and an Anti-Inflammatory Effect for Potential Applications in Neural Tissue Repair.

Photocured Biodegradable Polymer Substrates of Varying Stiffness and Microgroove Dimensions for Promoting Nerve Cell Guidance and Differentiation.

In-situ polymerized polypyrrole nanoparticles immobilized poly(ε-caprolactone) electrospun conductive scaffolds for bone tissue engineering

Opposite Mechanical Preference of Bone/Nerve Regeneration in 3D‐printed Bioelastomeric Scaffolds/Conduits Consistently Correlated with YAP‐Mediated Stem Cell Osteo/Neuro‐genesis

A facile approach to fabricate load-bearing porous polymer scaffolds for bone tissue engineering

3D-Printed PCL/PPy Conductive Scaffolds as Three-Dimensional Porous Nerve Guide Conduits (NGCs) for Peripheral Nerve Injury Repair