Abstract:Conductivity is a desirable property of an ideal nerve guide conduit (NGC) that is being considered for peripheral nerve regeneration. Most of the conductive polymers reported in use for fabrication of tissue engineering scaffolds such as polypyrrole (PPy), polyaniline, polythiophene, and poly(3,4-ethylenedioxythiophene) are non-biodegradable and possess weak mechanical properties to be fabricated into 3D structures. In this study, a biodegradable and conductive block copolymer of PPy and Polycaprolactone (PPy-b-PCL) was used to fabricate 3D porous NGCs using a novel electrohydrodynamic jet 3D printing process which offers superior control over fiber diameter, pore size, porosity, and fiber alignment. PCL/PPy scaffolds with three different concentrations of PPy-b-PCL (0.5, 1, and 2% v/v) were fabricated as a mesh (pore size 125 ± 15 μm) and the effect of incorporation of PPy-b-PCL on mechanical properties, biodegradability, and conductivity of the NGCs were studied. The mechanical properties of the scaffolds decreased with the addition of PPy-b-PCL which aided the ability to fabricate softer scaffolds that are closer to the properties of the native human peripheral nerve. With increasing concentrations of PPy-b-PCL, the scaffolds displayed a marked increase in conductivity (ranging from 0.28 to 1.15 mS/cm depending on concentration of PPy). Human embryonic stem cell-derived neural crest stem cells (hESC-NCSCs) were used to investigate the impact of PPy-b-PCL based conductive scaffolds on the growth and differentiation to peripheral neuronal cells. The hESC-NCSCs were able to attach and differentiate to peripheral neurons on PCL and PCL/PPy scaffolds, in particular the PCL/PPy (1% v/v) scaffolds supported higher growth of neural cells and a stronger maturation of hESC-NCSCs to peripheral neuronal cells. Overall, these results suggest that PPy-based conductive scaffolds have potential clinical value as cell-free or cell-laden NGCs for peripheral neuronal regeneration.

3D-Printed PCL/PPy Conductive Scaffolds as Three-Dimensional Porous Nerve Guide Conduits (NGCs) for Peripheral Nerve Injury Repair

Surface-Modified Polypyrrole-Coated PLCL and PLGA Nerve Guide Conduits Fabricated by 3D Printing and Electrospinning.

3D printing of gelatin methacrylate-based nerve guidance conduits with multiple channels

Three-dimensional conductive polycaprolactone/carbon nanotubes scaffolds for peripheral nerve regeneration

Three-dimensional directional nerve guide conduits fabricated by dopamine-functionalized conductive carbon nanofibre-based nanocomposite ink printing

Synthetic bioresorbable poly-α-hydroxyesters as peripheral nerve guidance conduits; a review of material properties, design strategies and their efficacy to date

3D Printed Conductive Multiscale Nerve Guidance Conduit with Hierarchical Fibers for Peripheral Nerve Regeneration

Graphdiyne-loaded Polycaprolactone Nanofiber Scaffold for Peripheral Nerve Regeneration.

Projection-based 3D Printing of Multichannel Poly(caprolactone) Methacrylate Nerve Guidance Conduit for Peripheral Nerve Regeneration

Polymerizing Pyrrole Coated Poly (L-Lactic Acid-Co-ε-caprolactone) (PLCL) Conductive Nanofibrous Conduit Combined with Electric Stimulation for Long-Range Peripheral Nerve Regeneration.

Preparation of Polypyrrole-Embedded Electrospun Poly(lactic Acid) Nanofibrous Scaffolds for Nerve Tissue Engineering.

Preparation and characterization of conductive nerve guide conduit filled with dual drug-loaded nanofibers

Conductive PPY/PDLLA Conduit for Peripheral Nerve Regeneration.

3D Printing rGO/PCL/Mel Bionic Conduit for Peripheral Nerve Regeneration

A Novel Fluffy Conductive Polypyrrole Nano-Layer Coated Plla Fibrous Scaffold for Nerve Tissue Engineering

Elastomeric and Conductive Nerve Conduits From Poly(Glycerol‐Sebacate)/Carbon Nanofibers (PGS/CNFs)

Electrospun Composite PLLA-PPSB Nanofiber Nerve Conduits for Peripheral Nerve Defects Repair and Regeneration

3D-Bioprinted RGD-Alg/GelMA/PCL Scaffolds Laden with Schwann-like Cells for Peripheral Nerve Reconstruction

3D structured self-powered PVDF/PCL scaffolds for peripheral nerve regeneration

3D Printing of Conductive Tissue Engineering Scaffolds Containing Polypyrrole Nanoparticles with Different Morphologies and Concentrations

Conductive and alignment-optimized porous fiber conduits with electrical stimulation for peripheral nerve regeneration