Ternary Hybrids of Amorphous Nickel Hydroxide–Carbon Nanotube‐Conducting Polymer for Supercapacitors with High Energy Density, Excellent Rate Capability, and Long Cycle Life

Wenchao Jiang,Dingshan Yu,Qiang Zhang,Kunli Goh,Li Wei,Yili Yong,Rongrong Jiang,Jun Wei,Yuan Chen

DOI: https://doi.org/10.1002/adfm.201403354

IF: 19

2015-01-01

Advanced Functional Materials

Abstract:The utilization of Ni(OH)2 as a pseudocapacitive material for high performance supercapacitors is hindered by its low electrical conductivity and short cycle life. A coaxial ternary hybrid material comprising of amorphous Ni(OH)2 deposited on multiwalled carbon nanotubes wrapped with conductive polymer (poly (3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate)) is demonstrated. A thin layer of disordered amorphous Ni(OH)2 is deposited by an effective “coordinating etching and precipitating” method, resulting in an ultrahigh specific capacitance of 3262 F g−1 at 5 mV s−1 and excellent rate capability (71.9% capacitance retention at 100 mV s−1). More importantly, the polymer layer prevents the degradation of the nanostructure and dis­solution of Ni ion during repeated charge–discharge cycling for 30 000 cycles, a phenomenon which often plagues Ni(OH)2 nanomaterials. Using the ternary Ni(OH)2 hybrid and the reduced graphene oxide/carbon nanotube hybrid as the positive and negative electrodes, respectively, the assembled asymmetric supercapacitors exhibit high energy density of 58.5 W h kg−1 at the power density of 780 W kg−1 as well as long cycle life (86% capacitance retention after 30 000 cycles). The ternary hybrid architecture design for amorphous Ni(OH)2 can be regarded as a general approach to obtain pseudocapacitive materials for supercapacitors with both high energy density, excellent rate capability, and long cycle life.