Abstract:HfO2-based resistive random-access memory (RRAM) with a Ti buffer layer has been extensively studied as an emerging nonvolatile memory (eNVM) candidate because of its excellent resistive switching (RS) properties and CMOS process compatibility. However, a detailed understanding of the nature of Ti thickness-dependent RS and systematic thermal degradation research about the effect of post-metallization annealing (PMA) time on oxygen vacancy distribution and RS performance still needs to be included. Herein, the impact of Ti buffer layer thickness on the RS performance of the Al/Ti/HfO2/TiN devices is first addressed. Consequently, we have proposed a simple strategy to regulate the leakage current, forming voltage, memory window, and uniformity by varying the thickness of the Ti layer. Moreover, it is found that the device with 15 nm Ti shows the minimum cycle-to-cycle variability (CCV) and device-to-device variability (DDV), good retention (105 s at 85 °C), and superior endurance (104). In addition, thermal degradation of the Al/Ti(15 nm)/HfO2/TiN devices under different PMA times at 400 °C is carried out. It is found that the leakage current increases and the forming voltage and memory window decrease with the increase in PMA time due to the thermally activated oxidation of the Ti. However, when the PMA time increases to 30 min, the Ti can no longer capture oxygen from HfO2 due to the formation of self-limited TiOx. Therefore, the device shows superior thermal stability with a PMA time of 90 min at 400 °C and no degradation of the memory window, uniformity, endurance, or retention. This work demonstrates that the Ti/HfO2-based RRAM shows superior back-end-of-line compatibility with high thermal stability up to 400 °C for over an hour.

Thermally Stable Transparent Resistive Random Access Memory Based on All‐Oxide Heterostructures

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

Electrothermal Modeling and Simulation of Resistive Random Access Memory (RRAM) with Different Resistive Switching Oxides

Highly flexible resistive switching memory based on amorphous-nanocrystalline hafnium oxide films.

Uniform,fast,and Reliable CMOS Compatible Resistive Switching Memory

HfOx Bipolar Resistive Memory with Robust Endurance Using ZrNx As Buttom Electrode

Resistive Switching Characteristics of Pt/TaOx/HfNx Structure and Its Performance Improvement

Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering

Transparent and flexible resistive switching memory devices with a very high ON / OFF ratio using gold nanoparticles embedded in a silk protein matrix

Optimization of the Forming Process of HfOx-Based RRAM to Achieve Bidirectional Forming and Enhanced Switching Performance by Inserting an Oxygen-Vacancy-Rich Layer

Solution Processed Resistive Random Access Memory Devices for Transparent Solid-State Circuit Systems

Insight into interface behavior and microscopic switching mechanism for flexible HfO2 RRAM

PERFORMANCE OPTIMIZATION OF HFOX-BASED TRANSPARENT RESISTANCE RANDOM ACCESS MEMORY

High-K-Rare-Earth-Oxide Eu2o3 Films for Transparent Resistive Random Access Memory (rram) Devices

High Performance Hfox -Based Resistive Ram Devices and Its Temperature Dependent Switching

Thermal Stability and Data Retention of Resistive Random Access Memory with Hfox/Zno Double Layers

Improved Performance of HfxZnyO‐Based RRAM and Its Switching Characteristics Down to 4 K Temperature

HfO2-Based RRAM with in Situ Conductive Channels Induced by Nanoparticles to Improve Stability

Complementary Metal Oxide Semiconductor Compatible Hf-Based Resistive Random Access Memory with Ultralow Switching Current/Power

Low Power and High Uniformity of HfOx-based RRAM Via Tip-Enhanced Electric Fields

Chemical Insight into Origin of Forming-Free Resistive Random-Access Memory Devices