Abstract:Nitrogen-enriched porous carbon has been a promising material for CO2 capture in the recent decades. To enhance the performance of CO2 adsorption, both an N-active site and the textural properties are crucial determinants. Herein, ultra-microporous carbon with N-active species was prepared using two synthesis procedures: 1) one-step carbonization of a polybenzoxazine (PBZ) precursor at 800 °C, and 2) the CO2 activation process at 900 °C. The activated porous carbon had the higher specific surface area (943 m2/g) and a total pore volume (0.51 cm3/g) compared to un-activated porous carbon (335 m2/g and 0.19 cm3/g, respectively). In addition, the presence of N-active species such as pyridine-N, secondary-N, pyridone-N, and oxide-N in the carbon structures could be clearly observed in the high-resolution XPS spectra. The CO2 adsorption measurement was performed at 30 and 50 °C under a wide range of pressures (1-7 bar). The maximum amount of CO2 uptake was ca. 3.59 mmol/g for the activated porous carbon operated at 30 °C and a CO2 pressure of 7 bar, which was due to the high specific surface area and the large micropore volume. Specifically, carbon with a 3D interconnected pore structure, derived from the sol-gel process of the PBZ precursor, exhibited good structural stability and consequently led to better absorption capability under the high atmospheric pressure of CO2. The enhanced CO2 adsorption capability for the as-prepared porous carbon was based on two mechanisms: physisorption as a result of textural properties and chemisorption as a result of the acid-base interaction between the basic N functionality and the acidic CO2 gas. All results suggested that ultra-microporous carbon with N-active species prepared from polybenzoxazine is a promising adsorbent for CO2 capture and storage, which can be used at a wide range of pressures and in many applications e.g. flue gas adsorption and natural gas production.

Nitrogen-doped Porous Carbon Nanofiber Webs for Efficient CO2 Capture and Conversion

Synergistic effect of pore generation and nitrogen doping on the enhanced CO 2 capture and selectivity of carbon nanofibers

N‐doped Porous Carbon Derived from the Pyrolysis of a Polydopamine‐coated Hypercross‐linked Polymer for Enhanced CO2 Adsorption

Nitrogen-Doped Ultrahigh Microporous Carbons Derived from Two Nitrogen-Containing Post-Cross-Linked Polymers for Efficient CO2 Capture

Construction of Ultramicropore-Enriched N-doped Carbons for CO2 Capture: Self-decomposition of Polyethyleneimine-Based Precursor to Promote Pore Formation and Surface Polarity

Nickle oxide nanoparticles incorporated flexible and porous carbon nanofiber-based adsorbents for CO 2 capture

N-doping Porous Carbon with Rich Narrow Micropores for Highly Efficient CO2 Selective Adsorption: Insight from Experimental and Theoretical Study

One-Pot Synthesis of N-Rich Porous Carbon for Efficient CO2 Adsorption Performance

N, S, O Co-Doped Porous Carbons Derived from Bio-Based Polybenzoxazine for Efficient CO2 Capture

The fabrication of porous N-doped carbon from widely available urea formaldehyde resin for carbon dioxide adsorption

Facile Synthesis of Nitrogen-Doped Porous Carbons for CO 2 Capture and Supercapacitors

N -Heterocyclic Carbene Moiety in Highly Porous Organic Hollow Nanofibers for Efficient CO 2 Conversions: A Comparative Experimental and Theoretical Study

Highly Efficient CO2 Adsorption by Nitrogen-Doped Porous Carbons Synthesized with Low-Temperature Sodium Amide Activation

Enhancing CO 2 adsorption performance of porous nitrogen-doped carbon materials derived from ZIFs: Insights into pore structure and surface chemistry

Carbon Dioxide Adsorption on Carbon Nanofibers with Different Porous Structures

One-Pot Synthesis of Melamine Formaldehyde Resin-Derived N-Doped Porous Carbon for CO2 Capture Application

Self-Activating Approach for Synthesis of 2,6-Naphthalene Disulfonate Acid Disodium Salt-Derived Porous Carbon and CO 2 Capture Performance

Biomass-based N-rich porous carbon materials for CO2 capture and in situ conversion.

Enhanced CO2 capturing over ultra-microporous carbon with nitrogen-active species prepared using one-step carbonization of polybenzoxazine for a sustainable environment

Nitrogen-doped porous carbons derived from sustainable biomass via a facile post-treatment nitrogen doping strategy: Efficient CO2 capture and DRM

Iron Nanoclusters As Template/Activator for the Synthesis of Nitrogen Doped Porous Carbon and Its CO2 Adsorption Application.