Abstract:Stay cables are widely used in cable supported bridges and roofs. Due to extremely low inherent damping, cables are prone to vibrations with overdue amplitudes induced by support motions and by weather conditions. Such vibrations may cause reduced life of the cables and the whole structures, and the risk of losing public confidence in cable supported structures. Among kinds of countermeasures for mitigating cable vibrations, smart damping technology using Magneto-Rheological (MR) dampers attract recent research interest. The damping property of MR dampers can be controllable by tuning the current/voltage inputs for achieving the optimal or sub-optimal damping performance under various vibration conditions (frequencies and amplitudes). This paper presents a mathematical model for evaluating the damping ratio of the cable-damper system in the open-loop control mode, which takes into account the damper installation height, damper coefficient, damper stiffness, damper mass, stiffness of the damper support, and magneto-dependent force of the damper, as well as the sag and inclination of the cables. A 'generalized universal formula' is derived and a 'generalized universal curve' is plotted for damper design and optimization. The design value for damping enhancement is introduced by multiplying the minimum value of damping ratio required for suppressing rain-wind-induced cable vibration with a safety factor. Taking as an example the longest cable on the word's longest cable-stayed bridge-Sutong Bridge, China, this paper achieves to determine the installation height of the damper and the corresponding optimal damper coefficients for providing enough damping to suppress the rain-wind-induced vibration.

Free vibration of taut cable with a damper and a spring

CHARACTERISTICS OF MODAL DAMPING OF STEEL AND CFRP STAY CABLES WITH OIL DAMPERS

INVESTIGATION OF DAMPING MATRICES ACCURATE ESTIMATION OF CABLE-STAYED BRIDGES BASED ON NON-PROPORTIONAL DAMPING

Damping Parameter Identification Of Large Span Cable-Stayed Bridges

Free vibration of a taut cable with internal high damping rubber dampers and an external negative stiffness damper

STUDY ON CHARACTERISTICS OF MODAL DAMPING OF STEEL AND CFRP STAY CABLES

THEORETICAL ANALYSIS AND EXPERIMENTAL TEST ON DAMPING CHARACTERISTICS OF CFRP STAY CABLES

Nonlinear Dynamic Response of Stay Cables under Axial Harmonic Excitation

EFFECTS OF LOCAL CABLE VIBRATION ON THE SEISMIC RESPONSE OF CABLE-STAYED BRIDGES

Maximum modal damping of cable space vibration control with viscous damper in cable-stayed bridge

Design Formulas for Vibration Control of Taut Cables Using Passive MR Dampers

Dynamic Behaviors of a Two‐Cable Network With Two Negative Stiffness Dampers and a Cross‐Tie

EXPERIMENTAL STUDY ON VIBRATION MITIGATION OF A STAY CABLE USING NONLINEAR HYSTERETIC DAMPERS

Numerical Simulation of Vibration Control for Stay Cable Using MR Dampers

SIMULATION ANALYSIS FOR VIBRATION MITIGATION OF STAY-CABLE BY MR DAMPERS UNDER SEMI-ACTIVE CONTROL STRATEGY

Optimal design of transverse dampers incorporating inherent stiffness effects for stay cable vibration control: A case study with wire rope dampers

Design optimization of Magneto-rheological (MR) dampers for open-loop vibration control of stay cables

Study on Vibration Characteristics of Stay Cable-Nonlinear Viscous Damper System

Self-excited Oscillation Analysis of a Taut Cable under Wind Loading

Design Guidelines for Open-Loop Vibration Control of Stay Cables Using MR Dampers

Damping in stay cable with damper: Practical universal damping curve and full-scale measurement