Abstract:In order to verify the feasibility of three-dimensional (3D) printing technology in preparing the metamaterial absorbers with complex structure, a three-layer broadband absorbing metamaterial is designed and fabricated by 3D printing technology. The surface layer and middle layer of the metamaterial are composed of periodic arrays with different unit dimensions and the bottom layer of a slab structure. The optimized thickness of the metamaterial is 4.7 mm. A composite absorbent which consists of carbonyl iron powder and nylon is used to fabricate the absorber. In experiment, the obtained absorber is vertically irradiated by an electromagnetic (EM) wave. Two strong absorption peaks at 5.3 GHz and 14.1 GHz are achieved, with the reflection losses of -15.1 dB and -12.5 dB, respectively. The superposition of the two absorption peaks results in a reflection loss below -10 dB in a range from 4 to 18 GHz. The effective EM parameters of the surface layer and the middle layer are calculated by the S parameter inversion method. An effective model of the three-layer structure absorber is proposed and its reflectivity is calculated by using a multilayer structure reflectivity formula. The calculated reflectivity agrees well with the measured one. The absorbing and resonance mechanisms of the two absorption peaks are investigated by analyzing the dynamic distributions of power density loss, electric field and magnetic field. It can be clearly confirmed that the reflection losses at 5.3 GHz and 14.1 GHz are primarily concentrated on the bottom layer and surface layer, and the broadband absorption performance can be derived from the superposition of broadband absorptions of the three absorbing layers. Meanwhile, the strong electric coupling effect between the adjacent units in the surface layer is demonstrated by analyzing the electric-field distributions, which indicates that the strong reflection loss at 14.1 GHz is mainly caused by the electric response. The multiple scattering effects among the three layers are also considered according to the magnetic field distributions at two resonance frequencies. It is shown that there are two magnetic responses at 5.3 GHz and 14.1 GHz, respectively, and the multiple scattering contributes to increasing the EM wave propagation distance and enhancing the power loss. The designed absorbing metamaterials in this paper achieve good broadband absorption performances, particularly in the low frequency band. Combined with 3D printing rapid technology, a promising route to constructing 3D absorbing metamaterials with complex structures is proposed, which would be of great significance and broad practical prospect.

Design and Fabrication of Gradient Index Artificial Electromagnetic Medium Based on 3D Printing

Electromagnetic field attractor made of gradient index metamaterials.

3D and 4D Printing of Electromagnetic Metamaterials

Gradient Index Metamaterials Realized by Drilling Hole Arrays

Broadband and Multiband Terahertz Metamaterials Based on 3-D-Printed Liquid Metal-Filled Microchannel

3D printing metamaterials for highly efficient electromagnetic wave absorption

Controllable and scalable gradient-driven optimization design for two-dimensional metamaterials based on Deep learning

A Deep Learning Approach for Reverse Design of Gradient Mechanical Metamaterials

A 4D‐Printed Electromagnetic Cloaking and Illusion Function Convertible Metasurface (Adv. Mater. Technol. 23/2023)

Structural Broadband Absorbing Metamaterial Based on Three-Dimensional Printing Technology

Digital Light Processing 3D-Printed Ceramic Metamaterials for Electromagnetic Wave Absorption

Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications

Electromagnetic Black Hole for Efficiency Microwave Heating Based on Gradient-Index Metamaterials in Multimode Cavities

Metamaterial Electromagnetic Wave Absorbers and Devices: Design and 3D Microarchitecture

3D printing advanced architectures for electromagnetic interference shields

3D/4D printed tunable electrical metamaterials with more sophisticated structures

Excellent microwave absorption property of 3D printed SiCN matrix metamaterial

3D printing of customizable and lightweight multilayer MXene/nanocellulose architectures for tunable electromagnetic interference shielding via direct ink writing

1D Electromagnetic-Gradient Hierarchical Carbon Microtube Via Coaxial Electrospinning Design for Enhanced Microwave Absorption.

Guided Diffusion for Fast Inverse Design of Density-based Mechanical Metamaterials

Towards Large Area Thz Electromagnetic Metamaterials