Abstract:As a highly efficient thick plate welding resolution, narrow gap gas tungsten arc welding (NG-GTAW) is in the face of a series of problems like inter-layer defects like pores, lack of fusion, inclusion of impurity, and the sensitivity to poor sidewall fusion, which is hard to be repaired after the welding process. This study employs numerical simulation to investigate the molten pool behavior in NG-GTAW root welding. A 3D numerical model was established, where a body-fitted coordinate system was applied to simulate the electromagnetic force, and a bridge transition model was developed to investigate the wire–feed root welding. The simulated results were validated experimentally. Results show that the molten pool behavior is dominated by electromagnetic force when the welding current is relatively high, and the dynamic change of the vortex actually determines the molten pool morphology. For self-fusion welding, there are two symmetric inward vortices in the cross-section and one clockwise vortex in the longitudinal section. With the increasing welding current, the vortices in the cross-section gradually move to the arc center with a decreasing range, while the vortex in the longitudinal section moves backward. With the increasing traveling speed, the vortices in the cross-section move toward the surface of the molten pool with a decreasing range, and the horizontal component of liquid metal velocity changes in the longitudinal section. For wire–feed welding, the filling metal strengthens the downward velocity component; as a result, the vortex formation is blocked in the cross-section and is strengthened in the longitudinal section.

Correlation of Arc Sound and Arc-sidewall Position in Narrow Gap MAG Welding

Analysis of Arc Sound Characteristics for Gas Tungsten Argon Welding

Study on the Relationship Between the Energy in Most Effective Frequency Range of Arc Sound Signal and the Change of Arc Height in Pulsed Al Alloy GTAW Process

Audio sensing and modeling of arc dynamic characteristic during pulsed Al alloy GTAW process

Research progress of narrow gap gas metal arc welding

Relationship Between Arc Sound Signal and Penetration Status in MIG Welding

Influence of Interwire Distance and Arc Length on Welding Process and Defect Formation Mechanism in Double-Wire Pulsed Narrow-Gap Gas Metal Arc Welding

Feature Extraction and Dimensionality Reduction of Arc Sound under Typical Penetration Status in Metal Inert Gas Welding

The Arc Sound Characteristic on Mig Weld Penetration

Study on Arc Characteristics and Their Influences on Weld Bead Geometry in Narrow Gap GMAW of 5083 Al-alloy

Mechanism Analysis and Feature Extraction of Arc Sound Channel for Pulse GTAW Welding Dynamic Process

Arc characteristics in alternating magnetic field assisted narrow gap pulsed GTAW

Characteristics of welding and arc pressure in TIG narrow gap welding using novel magnetic arc oscillation

The Effects of Arc Length on Welding Arc Characteristics in Al-Mg Alloy Pulsed Gas Tungsten Arc Welding

Influence of Interwire Angle on Undercutting Formation and Arc Behavior in Pulsed Tandem Narrow-Gap GMAW

A Comparison of the Swing and Non-Swing Arc Behavior in Arc Ultrasonic Assisted Narrow Gap GMAW

Study on Insufficient Fusion of NG-GMAW for 5083 Al Alloy

Time-Domain Characteristics Analysis of Penetration Arc Sound Signal in MIG Welding

Numerical simulation on molten pool behavior of narrow gap gas tungsten arc welding

Analysis of Acoustic Signals During GTAW Welding

Real-Time Control of Welding Penetration During Robotic Gtaw Dynamical Process by Audio Sensing of Arc Length