Abstract:Despite the non-contact underwater explosion phenomena (UNDEX) have been studied for decades and several numerical methods have been proposed in literature, its effects on military structures, especially composite ones, are even nowadays matter of research. In early design phases, it is not always possible to verify the shock resistance of hull structures modelling the whole phenomenon, in which fluid, gas and solid properties must be properly set in a fully coupled fluid-structure interaction (FSI) numerical model. These ones are extremely complex to set, computationally demanding and certainly not suitable for everyday design practice. In this paper, a simplified finite element (FE) model, easy to use in an early design phase, is proposed. Both, the structure and the fluid are simulated. In this approximation, the fluid behaviour is simplified, using special finite elements, available in a commercial software environment. This choice reduces the computational time and numerical efforts avoiding the problem of combining computational fluid dynamics (CFD) and FE domains and equations in a fully coupled fluid-structure interaction model. A typical parallel body block of a minesweeper is modelled, using two-dimensional multi-layered shell elements to properly account for the composite materials behaviour. For the fluid instead, three dimensional volumetric elements, directly coupled to the structural elements, are placed. In addition, the same calculation is performed, modelling separately fluid in the CFD environment and structures in the finite element one. Thus, realizing a fully coupled fluid-structure interaction model. The results obtained by applying both numerical models are compared with the structural response measured on board of a composite ship during a full-scale shock test. The simplified proposed procedure provides results in satisfactory agreement with experiments, allowing the validation of the model. Approximations are discussed and differences with the real phenomenon and fully coupled CFD+FE method are shown, providing a better understanding of the phenomena. Eventually, the modelling strategy has been considered a valuable and cost-effective tool for the concept and preliminary design of composite structures subject to underwater explosions.

An Improved Shock Factor to Evaluate the Shock Environment of Small-Sized Structures Subjected to Underwater Explosion

Numerical Simulation of Shock Wave Caused by Underwater Blasting

Analysis of Damage Regularity of Single-Shell Submarine Subject to Typical Weapons' Attacking

A substructure method for the transient response of vertical cylinders subjected to shock wave of underwater explosion

Underwater Explosion of Slender Explosives: Directional Effects of Shock Waves and Structure Responses

Centrifuge Experiment and Numerical Analysis of an Air-Backed Plate Subjected to Underwater Shock Loading

Effects of Connecting Structures in Double-Hulled Water-Filled Cylindrical Shells on Shock Wave Propagation and the Structural Response to Underwater Explosion

Numerical investigation of the underwater explosion of a cylindrical explosive with the Eulerian finite-element method

Study on the characteristics of initial shock waves generated by cylindrical charge for underwater explosion

A Novel Efficient Method to Evaluate the Dynamic Response of Laminated Plates Subjected to Underwater Shock

Nonlinear characteristics and corrections of near-field underwater explosion shock waves

Numerical Simulations of Shock/obstacle Interactions Using an Improved Ghost-Cell Immersed Boundary Method

Shock-induced damage and dynamic fracture in cylindrical bodies submerged in liquid

Interaction between shock wave and a movable sphere with cavitation effects in shallow water

Full‐field Peak Pressure Prediction of Shock Waves from Underwater Explosion of Cylindrical Charges

Numerical study on dynamic buckling of a cylindrical shell subjected to underwater explosion

Modeling and Simulation of Underwater Shock Problems Using a Coupled Lagrangian—Eulerian Analysis Approach

Destabilization of Cylindrical Shells Coupling Effect of Local Impact Load and Circumferential Pressure

A Design Approach to Assess Effects of Non-Contact Underwater Explosions on Naval Composite Vessels

Sensitivity Study on Typical Parameters of Underwater Explosion Numerical Simulation

Mitigation effects on the reflected overpressure of blast shock with water surrounding an explosive in a confined space