Abstract:Despite the non-contact underwater explosion phenomena (UNDEX) have been studied for decades and several numerical methods have been proposed in literature, its effects on military structures, especially composite ones, are even nowadays matter of research. In early design phases, it is not always possible to verify the shock resistance of hull structures modelling the whole phenomenon, in which fluid, gas and solid properties must be properly set in a fully coupled fluid-structure interaction (FSI) numerical model. These ones are extremely complex to set, computationally demanding and certainly not suitable for everyday design practice. In this paper, a simplified finite element (FE) model, easy to use in an early design phase, is proposed. Both, the structure and the fluid are simulated. In this approximation, the fluid behaviour is simplified, using special finite elements, available in a commercial software environment. This choice reduces the computational time and numerical efforts avoiding the problem of combining computational fluid dynamics (CFD) and FE domains and equations in a fully coupled fluid-structure interaction model. A typical parallel body block of a minesweeper is modelled, using two-dimensional multi-layered shell elements to properly account for the composite materials behaviour. For the fluid instead, three dimensional volumetric elements, directly coupled to the structural elements, are placed. In addition, the same calculation is performed, modelling separately fluid in the CFD environment and structures in the finite element one. Thus, realizing a fully coupled fluid-structure interaction model. The results obtained by applying both numerical models are compared with the structural response measured on board of a composite ship during a full-scale shock test. The simplified proposed procedure provides results in satisfactory agreement with experiments, allowing the validation of the model. Approximations are discussed and differences with the real phenomenon and fully coupled CFD+FE method are shown, providing a better understanding of the phenomena. Eventually, the modelling strategy has been considered a valuable and cost-effective tool for the concept and preliminary design of composite structures subject to underwater explosions.

Modeling and Simulation of Underwater Shock Problems Using a Coupled Lagrangian—Eulerian Analysis Approach

Coupled Computational Fluid Dynamics-Discrete Element Method for Simulating the Interactions Between Ship-Induced Waves and Riprap on Restricted Waterway Banks

Numerical and Experimental Study on A 2-D Floating Body under Extreme Wave Conditions

Oscillatory Responses of a Spatially Random Seabed in the Vicinity of Structures: Validation and Application of the Integrated CFD-SFEM

Numerical simulations of underwater explosions using a compressible multi-fluid model

Numerical Simulation of Shock Wave Caused by Underwater Blasting

Survey on Experimental and Numerical Approaches to Model Underwater Explosions

A Novel Efficient Method to Evaluate the Dynamic Response of Laminated Plates Subjected to Underwater Shock

An analytical method for evaluating the dynamic response of plates subjected to underwater shock employing Mindlin plate theory and Laplace transforms

Interaction between shock wave and a movable sphere with cavitation effects in shallow water

Validation study on numerical simulation of RC response to close-in blast with a fully coupled model

Numerical simulation on the whole process of an underwater explosion between a deformable seabed and a free surface

Investigation of Shock Wave Propagation and Water Cavitation in a Water-filled Double Plate Subjected to Underwater blast

Effects of Connecting Structures in Double-Hulled Water-Filled Cylindrical Shells on Shock Wave Propagation and the Structural Response to Underwater Explosion

Numerical investigation of the underwater explosion of a cylindrical explosive with the Eulerian finite-element method

A Design Approach to Assess Effects of Non-Contact Underwater Explosions on Naval Composite Vessels

Underwater Explosion of Slender Explosives: Directional Effects of Shock Waves and Structure Responses

Application of Central-Weighted Essentially Non-Oscillatory Finite-Volume Interface-Capturing Schemes for Modeling Cavitation Induced by an Underwater Explosion

Numerical study on dynamic buckling of a cylindrical shell subjected to underwater explosion

Numerical Modeling of Underwater Explosion by One-Dimensional ANSYS-AUTODYN

Smoothed Particle Hydrodynamics for Numerical Simulation of Underwater Explosion