Abstract:In sodium-ion batteries (SIBs), TiO2 or sodium titanates are discussed as cost-effective anode material. The use of ultrafine TiO2 particles overcomes the effect of intrinsically low electronic and ionic conductivity that otherwise limits the electrochemical performance and thus its Na-ion storage capacity. Especially, TiO2 nanoparticles integrated in a highly conductive, large surface-area, and stable graphene matrix can achieve an exceptional electrochemical rate performance, durability, and increase in capacity. We report the direct and scalable gas-phase synthesis of TiO2 and graphene and their subsequent self-assembly to produce TiO2/graphene nanocomposites (TiO2/Gr). Transmission electron microscopy shows that the TiO2 nanoparticles are uniformly distributed on the surface of the graphene nanosheets. TiO2/Gr nanocomposites with graphene loadings of 20 and 30 wt.% were tested as anode in SIBs. With the outstanding electronic conductivity enhancement and a synergistic Na-ion storage effect at the interface of TiO2 nanoparticles and graphene, nanocomposites with 30 wt.% graphene exhibited particularly good electrochemical performance with a reversible capacity of 281 mAh/g at 0.1 C, compared to pristine TiO2 nanoparticles (155 mAh/g). Moreover, the composite showed excellent high-rate performance of 158 mAh/g at 20 C and a reversible capacity of 154 mAh/g after 500 cycles at 10 C. Cyclic voltammetry showed that the Na-ion storage is dominated by surface and TiO2/Gr interface processes rather than slow, diffusion-controlled intercalation, explaining its outstanding rate performance. The synthesis route of these high-performing nanocomposites provides a highly promising strategy for the scalable production of advanced nanomaterials for sodium-ion batteries.

Graphene-Supported NaTi2(PO4)3 as a High Rate Anode Material for Aqueous Sodium Ion Batteries

NaTi2(PO4)3/Carbon and NaTi2(PO4)3/Graphite Composites As Anode Materials for Aqueous Rechargeable Na-ion Batteries

Synthesis and performance of a graphene decorated NaTi2(PO4)3/C anode for aqueous lithium-ion batteries

Self-generated Hollow NaTi2(PO4)(3) Nanocubes Decorated with Graphene As a Large Capacity and Long Lifetime Anode for Sodium-Ion Batteries

Lignin-Derived Nitrogen-Doped Porous Carbon as a High-Rate Anode Material for Sodium Ion Batteries

F-Doped NaTi2(PO4)3/C Nanocomposite As a High-Performance Anode for Sodium-Ion Batteries.

High Rate Capability of TiO2/nitrogen-doped Graphene Nanocomposite As an Anode Material for Lithium–ion Batteries

ollow NaTi 2 ( PO 4 ) 3 nanocubes decorated with graphene as a large capacity and long lifetime anode for sodium-ion batteries †

Titania/graphene nanocomposites from scalable gas-phase synthesis for high-capacity and high-stability sodium-ion battery anodes

A High Rate and Long Cycling Performance NaTi2(PO4)3 Core–Shell Porous Nanosphere Anode for Aqueous Sodium‐Ion Batteries

Enhanced Lithium Storage Performance of Nanostructured NaTi2(PO4)3 Decorated by Nitrogen-Doped Carbon

Synthesizing Porous NaTi2(PO4)3 Nanoparticles Embedded in 3D Graphene Networks for High-Rate and Long Cycle-Life Sodium Electrodes.

NaTi2(PO4)3 Nanoparticles Embedded in Carbon Matrix as Long-Lived Anode for Aqueous Lithium Ion Battery

Enhanced Sodium Storage Performance of NASICON-structured NaTi2(PO4)3/C Decorated with Graphene

Raising Lithium Storage Performances of NaTi<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub> by Nitrogen and Sulfur Dual-Doped Carbon Layer

Metal-organic framework-derived graphene@nitrogen doped carbon@ultrafine TiO 2 nanocomposites as high rate and long-life anodes for sodium ion batteries.

Ultrasmall TiO2-Coated Reduced Graphene Oxide Composite As a High-Rate and Long-Cycle-Life Anode Material for Sodium-Ion Batteries.

Mesoporous TiO2 Nanosheets Anchored on Graphene for Ultra Long Life Na-ion Batteries.

Enhanced Rate Performance of Nanosized Li4Ti5O12/graphene Composites As Anode Material by a Solid State-Assembly Method

Nitrogen-Doped Carbon for Sodium-Ion Battery Anode by Self-Etching and Graphitization of Bimetallic MOF-Based Composite

Green Ball Dianthus-Like Na2Ti6O13 As High-Rate Performance Anode for Sodium-Ion Batteries