Abstract:In this paper, a new benzotriazole phosphite ammonium salt derivative extreme pressure additive called PN was synthesized. Four-ball and optimal schwinggung reibungund verschleiss (SRV) testing machine were used to test the high temperature and extreme pressure performance of PN additive, and comparisons were made with the commonly used additives including Zinc Dialkyl Dithiophosphates (ZDDP) and Di-n-butyl phosphite (T304). The results show that the coefficient of friction (COF) and wear amount of the PN additive in the four-ball experiment were much smaller than that of the ZDDP and T304 additives. The COF of the PN additive in the RSV experiment changed slightly with temperature, and it had better high temperature extreme pressure performance in friction reduction than the traditional ZDDP and T304 additives. When the temperature was 120 degrees C, the COF of PN was about 30% lower than that of traditional additives. Thermogravimetric analysis showed that the failure temperature of PN additives was within 180-200 degrees C, and the thermal stability was better than that of ZDDP and T304. After the four-ball test, a scanning electron microscope (SEM) was used to observe the morphology of wear spots on the ball surface. It was found that the wear spots containing PN additive had slight adhesive wear, while those containing ZDDP and T304 showed serious adhesion and ploughing wear, and the surface appeared peeling and tearing. XPS was used to detect the chemical composition of friction surface containing PN additive, and thus the formation process of film on frictional surface was analyzed.

The Tribochemical Study of Novel Phosphorous-Nitrogen (P-N) Type Phosphoramidate Additives in Water

The Tribological Study of Novel Phosphorous–nitrogen Type Phosphoramidate Additives in Rapeseed Oil

Tribological Study of Oil-Miscible Quaternary Ammonium Phosphites Ionic Liquids as Lubricant Additives in PAO

The Tribological Characteristics and Mechanism of Several P-N Type Extreme Pressure and Antiwear Additives in Polyoxyethylene Glycol

Xps and Xanes Characteristics of Tribofilms and Thermal Films Generated by Two P- And/Or S-Containing Additives in Water-Based Lubricant

Tribological Properties and Worn Surface Analysis Generated by Ashless and Phosphorus-Free Additive in Water-Based Lubricant

A New Extreme Pressure Additive Containing Phosphorus and Nitrogen (PN) to Improve Gear Oil Tribological Properties

A New Benzotriazole Phosphite Ammonium Salt Derivative (PN) Extreme Pressure Additive to Improve Gear Oil Tribological Properties

X‐ray Absorption Near‐edge Structure Analysis of Tribofilms Generated by Highly Efficient, Friction‐reducing Additive in Water–polyglycol–glycol Lubricant

Tribochemical Study of Tetrazole Derivatives As Lubricating Oil Additives

A Tribological Study of an S–P–N Containing Additive in Polyalphaolefin

Tribological study of triazine derivatives as additives in rapeseed oil

Tribological properties generated by a S–P–Cl-containing additive in water-based lubricant

XANES characteristics of tribofilms generated by dithiophosphate additive in water at different test temperatures and durations

The Tribochemical Study of Two Triazine Derivatives As Additives in Rapeseed Oil

Tribological Properties Study of N-containing Heterocyclic Imidazoline Derivatives As Lubricant Additives in Water-Glycol

The Tribological Study of S‐(1H‐Benzotriazol‐1‐yl) Methyl N,N‐dialkyldithiocarbamates As Additives in Synthetic Lubricants

Tribological Behavior of Three Novel Triazine Derivatives As Additives in Rapeseed Oil

Novel concept of nano-additive design: PTFE@silica Janus nanoparticles for water lubrication

The tribological study of S-(1H-benzotriazol-1-YL) methyl N, N dialkyldithiocarbamates as additives in pentaerythritol ester

Tribological Study of A Novel Borate Ester Containing Dialkylthiophosphate Group As Multifunctional Additive