Abstract:A supercritical carbon dioxide (S-CO2) and Organic Rankine Cycle (ORC) combined cycle has been considered to fully use the residual heat of a high temperature heat source in this paper. The topping cycle is a S-CO2 recompression cycle, and the bottoming cycle is an ORC with R245fa as the working fluid. Compared with previous studies, the influence of several additional parameters, including the S-CO2 recompression cycle main compressor inlet temperature and pressure and the S-CO2 recompression cycle split ratio, has been conducted. It indicates that the split ratio plays an important role on the S-CO2 recompression cycle, even on the combined cycle. A thermodynamic optimization method which considers the split ratio is proposed to maximum the combined cycle thermal efficiency. By this method, more than 4.1% increment on the thermal efficiency can be attained. INTRODUCTION The supercritical carbon dioxide (S-CO2) is a special kind of CO2 fluid whose temperature and pressure are higher than its critical values (304.13K, 7.38 MPa). The S-CO2 cycle, which uses S-CO2 as the working fluid, is considered to be one of the most promising power generation technologies for the future (Feher, 1968). The S-CO2 cycle has higher efficiency and more compact system and components than conventional power cycles, especially in the high temperature range. Besides, CO2 is easy to obtain and the S-CO2 cycle system has high safety level. It is widely acknowledged that the S-CO2 cycle is applicable for various heat sources, such as the nuclear energy (Moisseytsev and Sienicki, 2009), concentrated solar power (Turchi and Ma, 2012), fuel cell (Xia et al., 2019) and waste heat recovery (Song et al., 2018a). One of the S-CO2 cycle characteristics is that the specific heat capacity of the cold side flow is much higher than that of the hot side in recuperators. For the S-CO2 recompression cycle, the CO2 flow is split to compensate for the specific heat difference in the low temperature recuperator and to further enhance the heat recuperation in the high temperature recuperator. Therefore, the residual heat is decreased and the S-CO2 recompression cycle has higher efficiency than simple recuperated cycle. The S-CO2 recompression cycle has been adopted by National Energy Technology Laboratory (NETL) of U.S. DOE for Supercritical Transformational Electric Power (STEP) program (Lambruschini et al., 2016).

Thermodynamic Comparison and Optimization of Supercritical CO2 Brayton Cycles with a Bottoming Transcritical CO2 Cycle

Thermo-Economic Analysis Of A Recompression Supercritical Co2 Cycle Combined With A Transcritical Co2 Cycle

Thermodynamic Optimization on Supercritical Carbon Dioxide Brayton Cycles to Achieve Combined Heat and Power Generation

Thermo-economic analysis and multi-objective optimization of supercritical Brayton cycles with CO2-based mixtures

Design Optimization and Off-Design Performance Analysis of One-Dimensional Supercritical CO2 Brayton Cycle

Performance Analysis and Parametric Optimization of Supercritical Carbon Dioxide Cycle with Bottoming Organic Rankine Cycle

Thermodynamic and Economic Analysis and Multi-objective Optimization of Supercritical CO2 Brayton Cycles

Thermodynamic Analysis and Optimization of a Supercritical Carbon Dioxide (S-CO2) Recompression Cycle Coupled with a Bottoming Organic Rankine Cycle

Design optimization and off-design performance analysis of one-dimensional supercritical CO 2 Brayton cycle

Preliminary design and part-load performance analysis of a recompression supercritical carbon dioxide cycle combined with a transcritical carbon dioxide cycle

Influence of Supercritical Carbon Dioxide Brayton Cycle Parameters on Intelligent Circulation System and Its Optimization Strategy

Thermodynamic evaluation and optimization of supercritical CO 2 Brayton cycle considering recuperator types and designs

Study on Performances of Supercritical CO2 Recompression Brayton Cycles with Multi-Objective Optimization

Thermodynamic Study of Main Compression Intercooling Effects on Supercritical CO2 Recompression Brayton Cycle

Modeling and thermodynamic analysis of gas-supercritical carbon dioxide combined cycle system

Performance Improvement Overview of the Supercritical Carbon Dioxide Brayton Cycle

Exergy and Exergoeconomic Analyses of A Supercritical Co2 Cycle for A Cogeneration Application

Comparative and Optimal Study of Energy, Exergy, and Exergoeconomic Performance in Supercritical CO2 Recompression Combined Cycles with Organic Rankine, Trans-Critical CO2, and Kalina Cycle

Performance analysis and parametric optimization of supercritical carbon dioxide (S-CO 2 ) cycle with bottoming Organic Rankine Cycle (ORC)

Optimization and Comparison on Supercritical CO2 Power Cycles Integrated Within Coal-Fired Power Plants Considering the Hot and Cold End Characteristics

Global Parameter Optimization and Criterion Formula of Supercritical Carbon Dioxide Brayton Cycle with Recompression