Abstract:In the process of flotation, the recovery of micro-particle molybdenite is difficult, and it is easy to lose in the tailings. In order to analyze the flotability difference of molybdenite with different particle sizes and to reveal the reasons for the flotability of fine-grained molybdenite, using four particle sizes molybdenite respectively -150+74, -74+45, -45+38 and -38 mu m as the research object, through molybdenite flotation tests of pure minerals, first by means of X ray diffraction analysis (XRD) and scanning electron microscopy (SEM) analysis, the floatability of particle size molybdenite and its crystalline characteristics, external morphology and variation were systematically studied and compared. The results showed that the floatability of molybdenite decreased with the decrease of particle size, and the flotation effect deteriorated. The floatability of molybdenite was determined by the area ratio of non-polar, low energy, hydrophobic "surface"and lively, hydrophilic "edge". In the process of transformation from coarse to fine particle size under the action of external force, firstly, it mainly broke along the cleavage plane, and then broke more along the fracture surface, resulting in the decrease of the area ratio of "surface" and "edge", and the decrease of the floatability. Meanwhile, the crystalline structure of molybdenite changed from 3R type to 2H type. In addition, compared with 3R type coarse particle size molybdenite, fine particle size molybdenite was mainly 2H type and the surface spacing of (002) crystal surface increased gradually. So water molecules was easy to enter the crystal structure and formed hydrated film on the mineral surface, resulting in an increase of the hydrophilicity of molybdenite. The physical properties of molybdenite with different particle sizes changed by different crystal types. The increase of the distance between the surfaces made the number of hydrophilic molybdenum sulfur bonds exposed to the fracture surface of molybdenite increase, which was the essential reason for the enhancement of hydrophilicity and the decrease of floatability of fine grained molybdenite.

The cleavage and surface properties of wet and dry ground spodumene and their flotation behavior

The relationship between spodumene surface pretreatment and flotation behavior: A review

Microscale insights into the influence of grinding media on spodumene micro-flotation using mixed anionic/cationic collectors

Influences of grinding parameters on flexural strength in the grinding of Li-spinel ferrites with electroplated diamond wheel

Effect of Grinding Media on the Flotation Behavior of Fluorite Using Sodium Oleate As a Collector

Decoupling the effects of solid and liquid phases in a Pb-water glass mixture on the selective flotation separation of scheelite from calcite

Advancements in the application of surface roughness in mineral flotation process

The effect of comminution on surface roughness and wettability of graphite particles and their relation with flotation

Novel insights into sylvite flotation modulated by exposing facets

Effects of surface Chemistry, particle morphology and pretreatment on zircon flotation

Flotation behavior of oleate and dodecylamine as mixed collector for recovery of lithium and rubidium from low-grade spodumene tailings: Experiment, characterization and DFT calculation

Effects of alkali pretreatment on the flotation of spodumene and feldspar

Effects of the Crystal Structures of Three Calcium-Containing Minerals on Their Surface Characteristics in Flotation

A DFT study on the effect of lattice defects on the electronic structures and floatability of spodumene

The flotation behaviour of N-(3-aminopropyl)-dodecanamide on three aluminosilicates

Mechanism of Fe(III)-modified silicate in the flotation separation of spodumene and albite: An experimental and theoretical study

XRD and SEM Analyses of Molybdenite with Different Particle Sizes and Its Floatability Difference

DFT Study on the Interaction Between Flotation Agents and Lepidolite-1M Surfaces

First‐principles study on the surface properties and floatability of magnesite tailings and its main gangue

Effects of grinding media on the flotation performance of cassiterite

Differences in dry and wet grinding with a high solid concentration of coking coal using a laboratory conical ball mill: Breakage rate, morphological characterization, and induction time