Abstract:Ultra-thin flat heat pipes (UFHPs) are being explored as a potential thermal management solution to address the heat dissipation challenges of electronic devices. However, the ultra-thin process increases fluid flow resistance and reduces the heat transfer capacity, posing challenges for wick structure optimization. In this study, the effects of wick structure, vapor space, and fluid flow properties on the maximum heat transfer capacity are analyzed by a fluid flow model. Microgroove and microcolumn as wick structures are optimized, and the coupling effects between capillary pressure and fluid flow resistances are analyzed. The maximum heat transfer capacity and the corresponding optimal wick structure dimensions are determined by the vapor space friction and wick structure friction, which are calculated by structural friction coefficients (Sv and Sl) and fluid friction coefficients (Fv and Fl). The models of fluid flow friction chosen in previous literature are validated for accuracy by Fluent. When the height of the wick structure (h) or vapor space (H) increases, the optimal dimensionless wick structure height (h*) increases and decreases under a fixed porosity (epsilon), respectively. The optimal h* of microgroove decreases and that of microcolumn increases as the dimensionless spacing (l*) increases. When ethanol is used as the working fluid, the optimal h* of microgroove is 1.98 and the optimal h* of microcolumn is 0.48, under the condition of H = 0.3 mm, h = 0.15 mm, and epsilon = 0.5. This model also emphasizes the importance of working fluid properties on the design of the wick structure, and a higher value of Fl/Fv results in a lower optimal h*. Moreover, methanol and acetone exhibit higher heat transfer capacity compared with ethanol. This study aims to provide comprehensive design principles for optimizing UFHP heat transfer capacity.

Experimental Investigation on the Sintered Wick of the Anti-Gravity Loop-Shaped Heat Pipe

Experimental Investigation on the Temperature Distribution Characteristics of the Evaporation Section in a Pulsating Heat Pipe

Experimental study on thermal performance of ultra-thin heat pipe with a novel composite wick structure

Experimental study on capillary performance of sintered powder porous wick for loop heat pipes

Heat transfer performance of cylindrical heat pipes with axially graded wick at anti-gravity orientations

Development of Sintered Ni-Cu Wicks for Loop Heat Pipes

Fabrication and capillary characterization of multi-scale micro-grooved wicks with sintered copper powder

Experimental Investigation of Effective Thermal Conductivity for LHP Wicks

Experimental Studies on a Novel Thin Flat Heat Pipe Heat Spreader

Study of the heat transfer performance of a loop heat pipe with aluminum wick

Experimental research on the thermal performance of a flat evaporator loop heat pipe with a new composite wick

Experimental Study of Evaporative Heat Transfer in Sintered Copper Bidispersed Wick Structures

Analysis of thermal characteristics of the heat pipes with segmented composite wicks

Heat Transfer Capacity Optimization Design of Microgroove and Microcolumn in an Ultra-Thin Flat Heat Pipe

Experimental Investigation Of Micro/Nano Heat Pipe Wick Structures

Sintered Wick Heat Pipes with Excellent Heat Transfer Capabilities—Case Study

Single/multi-objective optimization and comparative analysis of liquid-metal heat pipe

EFFECTIVE THERMAL CONDUCTIVITY OF LOOP HEAT PIPE WICKS

Experimental study on the thermal performance of ultra-thin flat heat pipes with novel multiscale striped composite wick structures

Structural effect of internal composite wick on the anti-gravity heat transfer performance of a concentric annular high-temperature heat pipe

Experimental study on the characteristics of loop heat pipe with modified carbon fiber felt wick