Abstract:The porous wick, as a core component of the loop heat pipe (LHP), serves as a source of circulation power. Inspired by the transport system of plant vessels, a radially stacked polyethersulfone (PES) porous wick was designed using PES membranes with an anisotropic porous structure. The PES membranes exhibited excellent capillary force and high permeability. However, the supply capacity of the axially stacked wick was far inferior to that of sintered wick due to the problem of contact gaps and pore misalignment between layers. From the bionic point of view, a laminar winding special transport structure, which is perpendicular to the direction of liquid transport was proposed. The method effectively avoids the adverse effects of gap and pore misalignment on liquid transport. Combining experimental and simulation methods, the heat transfer characteristics and liquid transport characteristics of the radial stacking polyethersulfone wick (RPES) were studied and compared with those of traditional axial stacking polyethersulfone wick (APES) and sintered nickel wick. The results showed that the heat transfer performance of RPES-LHP was significantly improved, with the heating surface temperature maintained at 54.1 °C and thermal resistance of 0.095 °C/W under a heat load of 400 W, which was respectively 26.6 °C and 0.066 °C/W lower than that of the APES-LHP. The evaporator thermal resistance of RPES-LHP also ranked among the top in existing research on wicks. Simulation results indicated that the radial stacking method avoided capillary force weakening and flow resistance increase caused by gap and pore misalignment, thereby enhancing the supply capacity of RPES. The concept of regulating the stacking orientation of the wick to be perpendicular to the direction of liquid transport can strengthen the supply capacity and provide light on the design of porous wicks in the future.

Influence of packing density on performance of porous wick for LHP

Experimental study on capillary performance of sintered powder porous wick for loop heat pipes

Development of biporous wicks for flat-plate loop heat pipe

Experimental Study on Pore Structure and Performance of Sintered Porous Wick

Development of Sintered Ni-Cu Wicks for Loop Heat Pipes

Selective Laser Melting Manufacturing and Heat Transfer Performance Study of Porous Wick in Loop Heat Pipe

Biomimetic porous wick with efficient fluid transport and excellent heat transfer for loop heat pipes

Experimental Investigation of Effective Thermal Conductivity for LHP Wicks

Fabrication and capillary characterization of multi-scale micro-grooved wicks with sintered copper powder

Biomimetic Porous Wick Based on Plant Vessel Structure for Efficient Liquid Transport Andexcellent Heat Transfer

Experimental Study on Transient Performance of the Loop Heat Pipe with a Pouring Porous Wick

Experimental and Theoretical Study on Performance of Bi-Porous Wick for Passive Phase-Change Devices

EFFECTIVE THERMAL CONDUCTIVITY OF LOOP HEAT PIPE WICKS

A Simple and Effective Method to Directly Measure the Capillary Pressure of A Porous Wick

A Polyethersulfone Film Porous Wick for Loop Heat Pipes

Pore size optimization and fluid channel analysis of composite wick and anti-gravity study

Thermal performance of loop heat pipe with porous copper fiber sintered sheet as wick structure

Experimental Investigation on the Heat Transfer Characteristics of Loop Heat Pipe with Carbon Spheres Modified Nickel Wick

Reduction of effective thermal conductivity for sintered LHP wicks

Design, fabrication and characterization of porous ceramics secondary wick of a loop heat pipe to reduce heat leakage

Effect of fabrication parameters on capillary pumping performance of multi-scale composite porous wicks for loop heat pipe