Abstract:Ultrasonic imaging is one of the most important and still growing diagnostic tools today. Ultrasonic imaging is more appealing as a clinical imaging modality compared to such imaging modalities as magnetic resonance imaging (MRI), nuclear imaging, and x-ray computed tomography (CT) in that it is more cost-effective, non-invasive, capable of real-time operation, and portable while providing images of comparable quality and resolution. State-of-the-art ultrasonic scanners offer real-time gray scale images of anatomical detail with millimeter spatial resolution superimposed on which is a map of Doppler blood flow information displayed in color. Clinical applications of these devices are still expanding and the operating frequencies of these devices seem to inch higher and higher. High frequency (HF) ultrasound (>20 MHz) yields improved spatial resolution at the expense of a shallower depth of penetration. There are a number of clinical problems that may benefit from high frequency ultrasonic imaging. Intravascular imaging with probes mounted on catheter tips at frequencies higher than 20 MHz with the highest frequency being 60 MHz has been used to characterize atherosclerotic plaque and to guide stent placement and angioplastic procedures. The medical efficacy of ultrasonic imaging of anterior segments of the eye at frequencies higher than 50 MHz in diagnosing glaucoma and ocular tumors and in assisting refractive surgery has been demonstrated. Applications in dermatology for defining tumor involvement and for monitoring treatment, in vascular surgery for characterizing atherosclerotic plaques, and in small animal imaging are also being investigated. To further expand the role of HF ultrasound, probe performance must be improved since current HF ultrasound imaging devices, dubbed “ultrasound biomicroscopes” or “UBMs” by a number of investigators use mechanically scanned single element transducers. Compared to electronic scanning with linear arrays, mechanical scanning of a single element transducer has three major drawbacks: poorer resolution, slower frame rate, and motion of the probe. Single element transducers can only produce beams with a fixed focus which means the spatial resolution of the device is best only within the depth of focus, i.e., in a very tight zone and degrades rapidly beyond the focal point. Mechanical motion of the transducer limits the frame rate, is unreliable, and may cause discomfort and, at worst, hazard to the patient. My presentation will introduce several HF ultrasound transducers currently being developed by the NIH Transducer Resource Center at the University of California. Emphasis will be placed on the construction and implementation of high frequency array transducers. Learning Objectives: 1. Familiarize audience with high frequency ultrasound transducers and their applications.

Design and Fabrication of a Novel Three-Row Dual Frequency Ultrasound Transducer for Image-Guided Drug Delivery

Design and Fabrication of a Novel Dual-Frequency Confocal Ultrasound Transducer for Microvessels Super-Harmonic Imaging

A Novel Single-Element Dual-Frequency Ultrasound Transducer For Image-Guided Precision Medicine

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

TU-D-210A-04: Development of High Frequency Ultrasound Transducers for Medical Imaging

Design and simulation of a 2-D array flexible ultrasound transducer system for tissue characterization – A pilot study

A single crystal row-column-array for 3D ultrasound imaging

A Triple-Frequency Transducer for Endoscopic Imaging: Simulation Design and Experimental Verification

Finite element method simulation, design, and fabrication of micromachined high-frequency piezoelectric composite with hexagonal pillars for intravascular ultrasound imaging

Design of efficient, broadband single-element (20-80 MHz) ultrasonic transducers for medical imaging applications

High Frequency PMN-PT 1-3 Composite Transducer for Ultrasonic Imaging Application

Design and Simulation of a High Resolution Ultrasonic Micro-Transducer Derived by LiNbO<inf>3</inf>

Design and Fabrication of 1-3 Piezoelectric Composite Material Air Coupled Ultrasonic Transducer

Design and Fabrication of High Frequency Bnt Film Based Linear Array Transducer

Fabrication of Radial Array Transducers Using 1-3 Composite via a Bending and Superposition Technique

Miniature Ultrasound Transducer Incorporating Sm-PMN-PT 1-3 Composite

Numerical Study and Optimisation of a Novel Single-Element Dual-Frequency Ultrasound Transducer

A novel method to fabricate full-kerfed highfrequency (>100 MHz) ultrasonic array transducers

A Dual-Layer Micromachined PMN-PT 1-3 Composite Transducer for Broadband Ultrasound Imaging

Design of Piezoelectric Ultrasonic Transducer Based on Doped PDMS

Helical‐Like 3D Ultrathin Piezoelectric Element for Complicated Ultrasonic Field