Abstract:Al-Mg series alloy plays an important role in offshore manufacturing, transportation and aerospace industries for its high strength-to-weight ratio, high corrosion resistance and good welding performance. For high magnesium Al-Mg alloy, beta phase always acts as a restraint condition to the whole thermal mechanical processing (TMP) procedure. Its positive effect is still unclear. In this work, the effect of coarse beta(Al3Mg2) phase of Al-10Mg alloy annealed at 573 K for 24 h and applied double passes uniaxial compression on microstructure evolution was studied by using OM, XRD, EPMA and EBSD. The result shows that discrete coarse beta phase was precipitated in the interior of grains after 573 K and 24 h annealing treatment. The true stress-true strain curve of annealed sample was lower than that of solution treated one. Hardening rate of annealed sample was lower in first compression pass, and conversely higher than that of solution treated one in the second pass. Solution Mg atoms play an important role in strain hardening during dynamic recovery. Dislocation slipping was obstructed by coarse p phase, and then low angle boundary (LAB) was stimulated near coarse beta phase. Not just bulging nucleation mechanism working, dynamic recrystallization nucleation was stimulated and microstructure was refined. Since part of deformation-stored energy was lured away by LAB, lattice rotation of deformed grains were weakened possessing {001} and {101} textures simultaneously. Schmid factors of three blocks with different lattice orientations were calculated, which suggested that alloy can load more plastic deformation after annealing treatment. Texture of recrystallized new grains was weakened at the same time. Microstructure anisotropy could be controlled by coarse beta phase in TMP.

Correlated Nucleation Of Precipitates In Magnesium Alloy We54

Disclosing Differential Precipitation Behavior of a Novel High Mg-containing Al-Mg-Zn-Si Alloy

COMPUTER SIMULATION FOR PRECIPITATION PROCESSO Ni_<75>Al_<2.5>V_<22.5> ALLOY WITH THE MICROSCOPIC PHASE-FIELD METHOD

Three-Dimensional Phase-Field Simulation and Experimental Validation of β -Mg 17 Al 12 Phase Precipitation in Mg-Al-Based Alloys

Three-Dimensional Phase-Field Simulation and Experimental Validation of β-Mg17Al12 Phase Precipitation in Mg-Al-Based Alloys

Early Stages of Precipitation in Γ' Phase of a Ni–Al–Ti Model Alloy: Phase-Field and First-Principles Study

Multiscale thermo-kinetic characterization for β′ and β 1 precipitation in Mg-Sm alloys

Co-precipitated Ni/Mn Shell Coated Nano Cu-rich Core Structure: A Phase-Field Study

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Deformation Behavior of β Phase in a WE54 Magnesium Alloy

Phase Field Simulation on Morphology of Continuous Precipitate Mg17al12 in Mg-Al Alloy

Numerical Investigation on Precipitation Hardening of Mg-Gd Alloys

Effect of Coarse β(Al3Mg2) Phase on Microstructure Evolution in 573 K Annealed Al-10Mg Alloy by Uniaxial Compression

Experimental and first-principles characterization of heterogeneous nucleation of η on the E(Al18Mg3Cr2) phase in the 7075 Al alloys

Three-dimensional phase field simulation for rafting of multiparticle precipitate in elastic inhomogeneous alloy under external stress

Characterisation of Precipitates in a Mg–7Gd–5Y–1Nd–0.5Zr Alloy Aged to Peak-Ageing Plateau

First principles analysis of precipitation in Mg-Zn alloys

The effect of size and distribution of rod-shaped β' precipitates on the strength and ductility of a Mg-Zn alloy

A combined simulation and experimental study of the equilibrium shapes of η' and α precipitates in Mn-containing 7xxx Al-alloys

Study of Β Precipitation and Layer Structure Formation in Al 5083: the Role of Dispersoids and Grain Boundaries

Investigation of Atomic-Scale η1 Precipitate Growth in Aluminum-Zinc-Magnesium Alloys