Abstract:The traditional theoretical analysis method has many problems such as cumbersome calculation and low efficiency, and there is a relative lack of research on the simplified mechanical model in the field of road engineering. To further improve and enrich the existing theoretical analysis of pavement structures, and to realize the rapid analysis of the mechanical behavior of cement concrete pavement structure (CCPS), based on the statespace method, a new approach is proposed to analyze the mechanical response of the CCPS, taking the interlaminar interface shear slip effect into account. The CCPS is considered as a two-layered Euler beam. A state equation is established to investigate the static responses of the CCPS with explicit consideration of the interlaminar interface shear slip effect under the action of an arbitrary vertical load and is solved by matrix theory. Subsequently, the present solution is validated by the literature published and the numerical simulation. In addition, the effects of the interlayer shear stiffness, thickness of the base course, stiffness of Winkler foundation springs, and bending stiffness on the deformations of the CCPS, and the influence of external loads on the interlayer distributing shear forces are revealed. It is indicated that the interlaminar interface shear slip effect exhibits a significant influence on the deflection and bending deformation of the CCPS. Moreover, the proposed solution can not only be employed conveniently for the consideration of any interlaminar contact conditions and vertical load distributions but also be reduced to obtain the responses of a single-layer mechanical model.

Study of Dynamic Interface Friction Model under Seismic Loading

Shear characteristics of interface based on subloading-friction model

A Novel Approach for the Mechanical Response of Cement Concrete Pavement Structure Considering the Interlaminar Interface Shear Slip Effect

2D Numerical Model for Studying Frictional Sliding

Mechanism Analysis and Improved Model for Stick-Slip Friction Behavior Considering Stress Distribution Variation of Interface

Energy Dissipation on an Elastic Interface as a Metric for Evaluating Three Friction Models

Study on the Mechanism of Dynamic Slip-Weakening for a Rock Material Interface Based on a Vibration Experiment

Shear-friction behavior of concrete-to-concrete interface under direct shear load

Theoretical and experimental study on interface stiffness measurement of rough surface using improved acoustic model

Dynamic analysis of side slope stability against deep sliding

Testing and Modeling of Soil-Structure Interface

STUDY OF CONSTITUTIVE MODEL FOR ROCK INTERFACES AND JOINTS UNDER CYCLIC SHEAR LOADING

Modeling of Frictional Stick-Slip of Contact Interfaces Considering Normal Fractal Contact

A novel friction model for steel‐polymer interfaces in sliding seismic isolation bearings

An enhanced micromechanical rock–pile interface model with application to rock‐socketed pile modeling

A Dynamic Contact Force Model for Contactable Cracks with Static and Kinetic Friction

Generalised nonlinear modeling of unstable stick-slip force reduction effects in friction energy dissipation devices

Simulation for Rubber Friction on Self-Affine Surface Based on Energy Method

Dynamic analysis of laterally loaded single piles in sandy soils considering sliding and debonding on the pile-soil interface

Friction Characteristics Between Marine Clay and Construction Materials

Analytical Method for Interfacial Slip Failure Processes Based on UFL Bond-Slip Model: Study of Grout/Soil Anchorage Interfaces in Earthen Sites