Abstract:Polyaniline (PANI), as one of the most promising electrode materials for flexible supercapacitors, facing the problems of limited capacitive properties and poor cycling stability. Herein, we demonstrate that dopants have a great effect on the electrochemical performance of PANI and selecting a suitable dopant can be used as an effective way for enhancing the electrochemical behavior of PANI electrode. All PANI electrodes were synthesized by electropolymerization method using hydrochloric acid (HCl), perchloric acid (HClO4), sulfuric acid (H2SO4), p-toluenesulfonic acid (p-TSA), phosphoric acid (H3PO4) and phytic acid (PA) as dopants, respectively. The influence of dopants on morphology, doping level, redox sites accessibility and electrochemical performance of PANI electrodes were studied systematically. The results show that, PANI/HClO4 has the best capacitive behavior with a maximum specific capacity of 1341 C g−1 at 5 mV s−1 along with a 57 % capacity retention after 2000 cycles. Moreover, PANI/p-TSA shows the best cycling stability with 70% of capacity retention after 2000 cycles accompanied with a relatively high specific capacity (722 C g−1 at 5 mV s−1). Furthermore, PANI/HClO4 and PANI/p-TSA were used as electrodes for the fabrication of flexible all-solid-state symmetric supercapacitors. Results indicate that PANI/HClO4 device has higher energy density (12.57 Wh kg−1 at 283 W kg−1) than that of PANI/p-TSA (8.86 Wh kg−1 at 199 W kg−1). In contrast, PANI/p-TSA device with a capacity retention over 80% after 3000 cycles has better stability than PANI/HClO4 device which maintain 73% capacity after 3000 cycles. This fundamental study provides a much easier route in achieving high performance flexible PANI-based electrodes and opens new opportunities for facilitating PANI-based electrodes as promising candidates for wearable electronics.

Improving cyclic stability of polyaniline by thermal crosslinking as electrode material for supercapacitors

High Stability Supercapacitors Based on MXene/Spherical G-Ppy Composite Electrodes

Preparation of Polyaniline/activated Carbon Used for Supercapacitor Film Electrode by Cyclic Voltammetry

Three-dimensional Carbon Nanotube/ethylvinylacetate/polyaniline As a High Performance Electrode for Supercapacitors

Activated Carbon Coated with Polyaniline As an Electrode Material in Supercapacitors

Microstructure control for high-capacitance polyaniline

Experimental and computational investigation of Cu–N coordination bond strengthened polyaniline for stable energy storage

Enhanced Specific Capacitance and Stability of Polyaniline by Nafion Doping

Electropolymerization of polyaniline as high-performance binder free electrodes for flexible supercapacitor

Cobalt-nickel coordinated polyaniline as electrodes for high performance flexible asymmetric supercapacitor

Facile and controllable in-situ nitridation of polyaniline electrode for high-performance flexible all-solid-state supercapacitors

The effect of the polyaniline morphology on the performance of polyaniline supercapacitors

Ti 3 C 2 T x supported cross-linked polyaniline nanorods with the significantly-improved capacitive performance for flexible solid-state symmetric supercapacitors

Facile Synthesis and Electrochemical Characterization of Polyaniline@TiO2-CuO Ternary Composite as Electrodes for Supercapacitor Applications

Promoting Oriented Growth of a Polyaniline Array on Carbon Cloth through in Situ Chemical Polymerization under a High Voltage Electric Field for a Flexible Supercapacitor with High Areal Capacity and Stability

Cycle stability of activated carbon/PANi composite as supercapacitor electrode based on natural material

Synthesis of polyaniline nanomaterials for an effective supercapacitor applications

Synthesis and electrochemical capacitance performance of polyaniline doped with lignosulfonate

Supramolecule-assisted Synthesis of Cyclodextrin Polymer Functionalized Polyaniline/carbon Nanotube with Core-Shell Nanostructure As High-Performance Supercapacitor Material

Facile synthesis of polyaniline nanobelts for supercapacitor applications

Construction of tunable ZnCoO x /C-PANI electrode materials for high-performance supercapacitors