Abstract:Polymer solar cells (PSCs) with bulk heterojunction (BHJ) structures have seen rapid development in recent years. In comparison with their inorganic counterparts, PSCs have some advantages such as low cost, light weight, solution processability, and good mechanical flexibility. However, improvement of the power conversion efficiency (PCE) of PSCs is required for commercial applications. In order to achieve high- performance PSCs, active layers, including donor polymers and acceptors, are very important. Several design principles for conjugated donor polymers in PSCs have emerged, including optimization of the conjugated backbone, side-chains, and substituents. In the past few decades, various classes of electron-donating polymers have been reported for PSCs. Among them, quinoxaline (Qx) is a unique building block for the construction of different optoelectronic polymers because of its planar, rigid, and conjugated structure. Qx derivatives have proven interesting and have been widely employed in many fields. Qx-based conjugated polymers (or small molecules) can be easily modified to match with ball-like fullerene derivatives such as PCBM ([6,6]-phenyl-C-61 or C-71-butyric acid methyl ester) or weak crystalline non-fullerene acceptors such as 2,2'4[6,6,12,12-tetrakis(4-hexylphenyl)6, 12,-dihydrodithieno[2,3-d:2', 3'-d']s-indaceno[1,2-b: 5, 6-b']dithiophene-2,8-diyl]bis[methylidyne(3-oxo-1 H-indene-2, 1(3H)-diylidene)]]bispropanedinitrile (ITIC). Herein, we synthesized a Qx-based polymer with asymmetric side-chains (TPQ-1). The molecular weight, optical properties, molecular energy levels, and mobilities of TPQ-1 were investigated. Furthermore, the blend morphologies and photovoltaic properties of TPQ-1 using a strong crystalline non-fullerene (NF) acceptor (o-IDTBR) were systematically explored. The photovoltaic performance of TPQ-1 and its symmetric side-chain counterpart, HFQx-T, was compared. The introduction of asymmetric side-chains led to a favorable phase separation when blended with o-IDTBR. As expected, the TPQ-1:o-IDTBR-based devices exhibited a high PCE of 8.6% after thermal annealing (TA). In contrast, the HFQx-T:o-IDTBR-based devices showed a moderate PCE of 5.7%, moreover, the PCE was decreased to 4.6% after TA treatment. More importantly, a low bandgap material, PTB7-Th, was specifically selected as a third component to mix with the TPQ-1:o-IDTBR blend to form highly-efficient ternary PSCs. At an optimal weight ratio (15%) of PTB7-Th addition, a PCE of 9.6% was achieved. In the systems that were investigated, TPQ-1 demonstrated significantly better photovoltaic properties than the HFQx-T-based devices. These results indicate that Qx-based polymers with asymmetric side chains have a bright future in photovoltaic devices.

High performance quinacridone-based polymers in film transistors and photovoltaics: effects of vinylene linkage on crystallinity and morphology

Copolymerization of 3,3′′′-didodecylquaterthiophene with fluorene and silole units: Improving photovoltaic performance by tuning energy levels

Improve the photovoltaic performance of new quinoxaline-based conjugated polymers from the view of conjugated length and steric hindrance

Terpolymer Containing a meta-Octyloxy-phenyl-Modified Dithieno[3,2- f:2',3'- h]quinoxaline Unit Enabling Efficient Organic Solar Cells

Enhancement Of Photovoltaic Performance By Increasing Conjugation Of The Acceptor Unit In Benzodithiophene And Quinoxaline Copolymers

Conjugated Polymers of Fused Bithiophenes with Enhanced Π-Electron Delocalization for Photovoltaic Applications

Rational Design Dithieno[3,2‐f:2′,3′‐h]quinoxaline‐Based Polymers with Optimized Molecular Configuration and Charge Transfer for High‐Performance All‐Polymer Solar Cells

Development of quinoxaline based polymers for photovoltaic applications

Novel Quinoxaline-based Poly(phenylenevinylene)s Copolymers: Synthesis and Optical Properties

An alternating polymer with fluorinated quinoxaline and 2,7-carbazole segments for photovoltaic devices

Optimizing the conjugated side chains of quinoxaline based polymers for nonfullerene solar cells with 10.5% efficiency

Photovoltaic Performances of Two Alternating Polymers Having Meta-Octyloxy-phenyl Modified Dithieno[3,2-F:2′,3′-H]quinoxaline Unit

Unraveling the Main Chain and Side Chain Effects on Thin Film Morphology and Charge Transport in Quinoidal Conjugated Polymers

Fine Tuning the Glass Transition Temperature and Crystallinity by Varying the Thiophene-Quinoxaline Copolymer Composition

Pyrrolo[3,4-g]quinoxaline-6,8-dione-based conjugated copolymers for bulk heterojunction solar cells with high photovoltages

Design and Synthesis of Triazoloquinoxaline Polymers with Positioning Alkyl or Alkoxyl Chains for Organic Photovoltaics Cells

Asymmetric Quinoxaline-Based Polymer for High Efficiency Non-Fullerene Solar Cells

Isoquinoline-1,3-dione-derived conjugated polymers for field-effect transistors: Synthesis, properties, and the effect of inner aromatic bridges

Enhancing the Performance of a Thieno[3-4-b]pyrazine Based Polymer Solar Cell by Introducing Ethynylene Linkages

Synthesis and Photovoltaic Properties of Conjugated Copolymers Bearing bis(9,9-di(2-ethylhexyl)-9H-fluoren-2-yl)quinoxaline Subunit with Deep HOMO Level

Chain-Extending Polymerization for Significant Improvement in Organic Thin-Film Transistor Performance