Abstract:The traditional Unscented Kalman Filter (UKF) approach for nonlinear structural identification usually requires knowledge of external excitation. However, in real application, obtaining the input excitation of nonlinear structures can be challenging due to measurement error or difficulty in acquiring the accurate information. Consequently, the real-time application of the UKF method will be constrained. To address this issue, this paper develops an improved UKF-based synchronous identification method of nonlinear structural parameters and unknown external excitation. The proposed method starts with a preliminary estimate of the unknown excitation using the current predicted values of structural dynamic responses and parameters. Subsequently, the external excitation is further identified based on the updated state vector. In addition, to reduce the effect of measurement noise on the nonlinear structural identification and ensure the accuracy of the identified results, a Kalman Filter (KF) process is embedded in the UKF to optimize measurement noise covariance matrix in real time. The practicability and accuracy of the improved UKF method are confirmed by conducting numerical simulations on a single degree-of-freedom (S-DOF) and a six degree-of-freedom (six-DOF) nonlinear structural systems due to unknown seismic excitation. Moreover, a shake table test of a five-storey steel frame subjected to seismic excitation is employed to attest the feasibility of the proposed method. Both numerical and experimental results demonstrate that the improved UKF method can effectively achieve synchronous identification for nonlinear structural parameters and unknown excitation.

Extended Kalman Filter for Identification of Nonlinear Earthquake Responses of Bridges

Parameter identification for nonlinear behavior of RC bridge piers using sequential modified extended Kalman filter

FE-based Bridge Weigh-in-motion Based on an Adaptive Augmented Kalman Filter

Dynamic Monitoring and Data Analysis of a Long-Span Arch Bridge Based on High-Rate GNSS-RTK Measurement Combining CF-CEEMD Method

Identification of Earthquake Ground Motion Based on Limited Acceleration Measurements of Structure Using Kalman Filtering Technique

Kalman Filter Based Estimation of Neutral Axis Position of Bridge Deck under Traffic Loading

Extended Kalman filter algorithm for non-roughness and moving damage identification

Damage Identification of Frame Structures with Joint Damage under Earthquake Excitation

Parameter identification of a differentiable Bouc-Wen model using constrained extended Kalman filter

Rapid post-earthquake damage assessment of ageing reinforced concrete bridge piers using time-frequency analysis

Adaptive Bayesian filter with data-driven sparse state space model for seismic response estimation

A Kalman Filter-Based Method for Diagnosing the Structural Condition of Medium- and Small-Span Beam Bridges during Brief Traffic Interruptions

A Physics-Informed Neural Network for the Nonlinear Damage Identification in a Reinforced Concrete Bridge Pier Using Seismic Responses

Extended Bouc-Wen model identification using shaking table test data of ageing RC bridge piers

Static and dynamic vehicle load identification with lane detection from measured bridge acceleration and inclination responses

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

System Identification of a Structure Equipped with a Cable-Bracing Inerter System Using Adaptive Extended Kalman Filter

System Identification of a Cable-Stayed Bridge Using Vibration Responses Measured by a Wireless Sensor Network

Synchronous identification of nonlinear structural parameters and unknown external excitation based on improved UKF

Video-based multiscale identification approach for tower vibration of a cable-stayed bridge model under earthquake ground motions

Real-Time Identification of Time-Varying Cable Force Using an Improved Adaptive Extended Kalman Filter