Abstract:The study focuses on the synthesis of nanocomposites CoFe2O4–La1−xSrxCoO3 (x = 0.2, 0.6, 0.8) using a hybrid chemical coprecipitation and sol–gel method. Validation of composite formation, incorporating distinct spinel and perovskite phases, is achieved through Fourier‐transform infrared spectroscopy. From X‐ray diffraction spectra, it can be concluded that average crystalline size calculated from Debye–Scherer and Williamson–Hall method increases on increasing the Sr substitution. Furthermore, the % crystallinity increases on increasing the Sr substitution. The scanning electron microscope analysis confirms the intricate 3D morphology observed in the composites. The electrocatalytic performance of these materials in oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) is evaluated. Notably, CoFe2O4–La0.2Sr0.8 CoO3 exhibits remarkable electrocatalytic activity, achieving current densities of j = 11.1 mA cm−2 for OER and 47.4 mA cm−2 for MOR at E = 650 mV. This underscores its potential as a catalyst for sustainable energy conversion processes. Overall, these findings highlight the promising application of spinel‐boosted perovskite composites in enhancing the efficiency of critical electrochemical reactions. CoFe2O4–La1−xSrxCoO3 (x = 0.2, 0.6, 0.8) composites have been synthesized using a two‐step, low‐temperature wet chemical approach that combines coprecipitation and sol–gel techniques. The composite materials have been physicochemically analyzed using Fourier‐transform infrared spectroscopy, X‐ray diffraction, and scanning electron microscope. The electrocatalytic properties of the composite materials have been assessed in terms of their performance in oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) in alkaline medium. Cyclic voltammetry has been used for analyzing the redox behavior of the materials in 1 M KOH solution. The electrocatalytic activity of the materials has been assessed using anodic polarization curves on Ni substrate and the CoFe2O4–La0.2Sr0.8CoO3 film electrode demonstrates excellent activity, with current densities of 11.1 mA cm−2 for OER and 47.4 mA cm−2 for MOR at 650 mV. Also, the CoFe2O4–La0.2Sr0.8CoO3 film electrode has the maximum specific activity of 1.1 × 103 mA cm−2 g−1 at 650 mV toward OER. The electrodes' stability has been assessed through chronoamperometric experiments and additional insight into the enhancement of electrocatalytic activity gained through the electrochemical surface area estimations using electrochemical impedance spectroscopy. From chronoamperometric experiment, it has been observed that the CoFe2O4–La0.2Sr0.8CoO3 film electrode attains stability within 114 s with a current density of 108.7 mA cm−2. Furthermore, the thermodynamic parameters, including the standard enthalpy of activation (ΔH°#), standard entropy of activation (ΔS°#), and standard electrochemical energy of activation (ΔHel°# ), have been estimated by anodic polarization curve recorded in KOH as well as KOH with CH3OH solutions at various temperatures.

Improved Low-Temperature Activity of La–Sr–Co–O Nano-Composite for CO Oxidation by Phase Cooperation

Strong Local Coordination Structure Effects on Subnanometer PtOx Clusters over CeO2 Nanowires Probed by Low-Temperature CO Oxidation

Mechanistic Origin of Enhanced CO Catalytic Oxidation over Co3O4/LaCoO3 at Lower Temperature

Catalytic Co Oxidation And Co Plus No Reduction Conducted On La-Co-O Composites: The Synergistic Effects Between Co3o4 And Lacoo3

Investigation of Flame Spray Synthesized La1-xSrxCoO3 Perovskites with Promotional Catalytic Performances on CO Oxidation

Ultrastable PtCo/Co3O4-SiO2 Nanocomposite with Active Lattice Oxygen for Superior Catalytic Activity Toward CO Oxidation.

Correlating the electronic structure of perovskite La1−Sr CoO3 with activity for the oxygen evolution reaction: The critical role of Co 3d hole state

Effect of Textural Structure on the Catalytic Performance of LaCoO3 for CO Oxidation

Enhanced CO Catalytic Oxidation by Sr Reconstruction on the Surface of LaxSr1−xCoO3−δ

Insights into the Role of Strontium in Catalytic Combustion of Toluene over La1-xSrxCoO3 Perovskite Catalysts.

Synthesis of nanosized perovskite powder using amorphous complex method and their CO catalytic oxidation performance

Correlating the Electronic Structure of Perovskite La1-xSrxCoO3 with Activity for the Oxygen Evolution Reaction: the Critical Role of Co 3d Hole State

Facile One-Step Flame Synthesis of La1−xSrxMnO3 Nanoparticles for CO Catalytic Oxidation

Effect of polymerization/complexation agents molar ratio on structure and catalytic activity of La0.7Ba0.3Co0.3Ni0.7O3 nanocatalyst in low-temperature CO oxidation

One-Pot Facile Synthesis of La0.5Sr0.5CoO3/C by Sol-Microwave Method and Its Electrocatalytic Activity for Oxygen Evolution Reaction

Synthesis of La0.2Sr0.8CoO3 and Its Electrocatalytic Activity for Oxygen Evolution Reaction in Alkaline Solution

Perovskite Oxides La0.8Sr0.2Co1‒xFexO3 for CO Oxidation and CO+NO Reduction: Effect of Redox Property and Surface Morphology

In Situ Reconstruction of Active Heterointerface for Hydrocarbon Combustion Through Thermal Aging over Strontium-Modified Co3O4 Nanocatalyst with Good Sintering Resistance

Tuning the A‐site Element in LaCo0.8Fe0.2O3 Perovskite‐based Catalyst for High Temperature N2O Decomposition in Nitric Acid Plant

Tailoring Spinel with Perovskite: Sr Substitution in the Perovskite Phase of CoFe2O4–LaCoO3 Nanocomposite for Oxygen Evolution and Methanol Oxidation in Alkaline Medium

Sodium Borohydride-Assisted Synthesis of Strontium Substituted Lanthanum Cobaltate with In-Situ Generated Cobaltosic Oxide: Towards Enhanced Oxygen Evolution Reaction in Alkaline Media.