Abstract:Introduction Low coherence interferometry offers the possibility of solving the ‘powering up’ problem associated with all fibre optic interferometric sensors used to measure slowly varying measurands such as temperature or displacement. In a typical system, the remote sensor is illuminated with the output form a source with low temporal coherence and interrogated using a second interferometer which is scanned such that its optical path difference (OPD) is maintained to be exactly equal to that of the sensor. In order that fibre optic sensors can compete with conventional electronic sensors it is desirable to be able to multiplex several sensors. A variety of multiplexing configurations for interferometric sensors exploiting low coherence processing have been developed, which include coherence tuning(l) and time division multiplexing (TDM)(2). Practical difficulties are experienced with both techniques. The main problems with coherence tuning are i) the optical path length of each sensor must be different (incremented by the source coherence length) which imposes restrictions on the sensor designs, particularly in the case for a network of miniature sensors, and ii) very high cross talk levels, as the recovered signal contains both the desired signal for the coherence tuned sensor and uncorrelated optical power from all the other sensors in the network, which inevitably results in very poor S/N ratios. The noise associated with the uncorrelated signals can be eliminated by exploiting TDM, however, as it is necessary to sequentially coherence match the local receiving interferometer (LRI) to each sensor, the technique is difficult to use in practice. Here we report two novel partially multiplexed configurations where the problems listed above can be solved by fully multiplexing the scanning interferometer and the signal processing unit, whilst at the same time the sensor network is only partially multiplexed. Configuration (1) Long Rang Tracking The basic optical configuration for long range tracking is shown in figure la. The output beam from a low coherence optical source (LCOS) is first collimated and directed into the transmission Michelson interferometer (TMI). The output signal of this interferometer is then injected into a 50/50 multimode coupler and then used to illuminate the two bulk optic Michelson interferometers acting as sensor simulators.

Design Study Of Fiberoptic Based Fabry-Perot Type Interferometric Sensors Using Low-Coherence Signal Recovery

Research of a Reflective Fiber-Optic Displacement Sensor with Intensity Compensation

Low-Coherence Homodyne Interferometer for Sub-Megahertz Fiber Optic Sensor Readout

Study on Fiber-Optic Low-Coherence Interferometric and Fiber Bragg Grating Sensors

Signal Processing of White-Light Interferometric Low-Finesse Fiber-Optic Fabry-Perot Sensors

Multiplexing Optical Fiber Low Coherence and High Coherence Interferometric System with Large Range and High Resolution for On-Line Measurement

Recent progress in fibre optic low-coherence interferometry

Research on an optical fiber low-coherence interferometric sensing system with dual-interferometry

Universal Fiber-Optic Point Sensor System for Quasi-Static Absolute Measurements of Multiparameters Exploiting Low Coherence Interrogation

Simple multiplexing schemes for sensor networks exploiting low coherence interferometry

Modeling and Signal Processing of Low-Finesse Fabry-Perot Interferometric Fiber Optic Sensors

Low-coherence interferometry with homodyne demodulation capabilities for distributed fiber-optical sensors

Development of Prototype Fiber-Optic-based Fizeau Pressure Sensors with Temperature Compensation and Signal Recovery by Coherence Reading

A Comprehensive Study of Optical Fiber Acoustic Sensing

A Theoretical Study and Numerical Simulation of a Quasi-Distributed Sensor Based on the Low-Finesse Fabry-Perot Interferometer: Frequency-Division Multiplexing

Optical low-coherence reflectometry for a distributed sensor array of fiber Bragg gratings

A Prototype Fibre-Optic-based Fizeau Medical Pressure and Temperature Sensor System Using Coherence Reading

Recent progress in fiber-optic extrinsic Fabry–Perot interferometric sensors

Intermodal Fiber Interferometer with Spectral Interrogation and Fourier Analysis of Output Signals for Sensor Application

Study of polarization-insensitive fiber optic michelson interferometric sensors

Modeling of Low-Finesse, Extrinsic Fiber Optic Fabry-Perot White Light Interferometers