Super Meta-Absorber for Ultra-Thin OPV Films

Kai Liu,Haifeng Hu,Dengxin Ji,Xie Zeng,Haomin Song,Suhua Jiang,Qiaoqiang Gan

DOI: https://doi.org/10.1364/acpc.2013.aw4k.3

2013-01-01

Abstract:We computationally explore a wide-angle and polarization-insensitive super absorption based on a hybrid metamaterial absorber consisting of an ultra-thin organic photovoltaic layer between top metallic nanopatterns and a bottom metallic plate.

What problem does this paper attempt to address?

Omnidirectional, Thin Metasurface Exhibiting Selective Absorption for Un-Polarized Broadband Incidence

Qiansen Xie,Huajun Feng,Shangliang Wu,Xu Liu,Zhihai Xu

DOI: https://doi.org/10.1364/oe.467446

IF: 3.8

2022-01-01

Optics Express

Abstract:Thin devices with large areas have strong and omnidirectional absorption over a wide bandwidth and are in demand for applications such as energy harvesting, structural color, and vehicle LiDAR (laser detection and ranging). Despite persistent efforts in the design and fabrication of such devices, the simultaneous realization of all these desired properties remains a challenge. In this study, a 190-nm-thick metasurface with an area of 3 cm2, incorporating dielectric cylinder arrays, a chromium layer, a silicon nitride (SiNx) layer, and an aluminum layer is theoretically and experimentally demonstrated. The developed device achieves an average absorptivity of ∼99% (97% in the experiment) in the entire visible spectrum 400-700 nm. Moreover, it exhibits strong absorption over a wide range of incident angles (∼91% and 90% at 60° in the calculation and experiment, respectively). Importantly, the feasibility of applying the developed metasurface absorber to solar thermophotovoltaics and vehicle LiDAR (laser detection and ranging) has been explored. Moreover, the photoresist can be replaced by other glues and easily scaled up to a large area using the roll-to-roll nanoimprinting process. With the excellent spectral properties and performance, this device is promising for large-area applications.
Compact Multilayer Film Structures for Ultrabroadband, Omnidirectional, and Efficient Absorption

Chenying Yang,Chengang Ji,Weidong Shen,Kyu-Tae Lee,Yueguang Zhang,Xu Liu,L. Jay Guo

DOI: https://doi.org/10.1021/acsphotonics.5b00689

IF: 7

2016-01-01

ACS Photonics

Abstract:We present a novel scheme for ultrabroadband and omnidirectional perfect absorbers with compact multilayer film structure. Our proposed device shows an average absorption of similar to 98% over a wide range of wavelengths ranging from 400 to 2000 nm. The ultrabroadband characteristics are achieved with strongly overlapped optical resonances by designing a tandem structure composed of three absorptive materials, while the overall structure features a graded refractive index profile to obtain a wideband antireflection property. In addition to the high efficiency and ultrabroadband absorption, our perfect absorbers exhibit a great angular tolerance up to 60 degrees, which is attributed to not only relatively broad resonances but also negligible propagation phase shifts in ultrathin highly absorbing layers. Lastly, we explore the effect of the number of semiconductor-metal stacks on the performance of the absorber. The presented approach can have tremendous potential for various applications, such as solar-thermal energy harvesting, thermoelectrics, detection, and imaging.
Large-Area, Omnidirectional Metasurface Exhibiting Unpolarized Broadband Absorption

Qiansen Xie,Huajun Feng,Shangliang Wu,Weidong Shen,Xu Liu,Zhihai Xu

DOI: https://doi.org/10.1016/j.optcom.2023.129269

IF: 2.4

2023-01-01

Optics Communications

Abstract:Despite the ongoing efforts to design and fabricate large-area metasurface absorbers using cost-effective fabrication processes and low-cost materials, significant challenges persist. In this study, we present an anodized aluminum oxide template-assisted metasurface absorber with an area of 4 cm2, which incorporates glue cylinder arrays, a low-cost nickel layer, and protective glue layers. This device achieved an average absorptivity of approximately 91% (90% in the experiment) in the 200-900 nm wavelength range. The absorption level remained above 80% even at incident angles up to 45 degrees, with calculated and experimental values of 92% and 82%, respectively. Moreover, the absorption is not sensitive to the thickness of the residual glue layers, making it ideal for roll-to-roll nanoimprinting processes. Therefore, the proposed metasurface absorber offers an alternative method for achieving broadband absorption in an effective manner and has great potential for related applications.
Wide-Angle and Polarization-Insensitive Perfect Absorber for Organic Photovoltaic Layers

Kai Liu,Haifeng Hu,Haomin Song,Xie Zeng,Dengxin Ji,Suhua Jiang,Qiaoqiang Gan

DOI: https://doi.org/10.1109/LPT.2013.2264047

2013-01-01

Abstract:In this letter, we computationally explore a wide-angle and polarization-insensitive perfect absorber based on hybrid metal-dielectric-metal structures. By introducing an organic photovoltaic layer between top metallic nanopatterns and a continuous metal bottom plate, an enhanced angle-and polarization-insensitive absorption can be obtained in the spectral range 400-700 nm, which is promising to realize improved thin-film organic photovoltaic devices. The physical mechanism of the perfect absorber is explained theoretically and numerically by the critical coupling principle.
Design of an Ultrabroadband Visible Metamaterial Absorber Based on Three-Dimensional Metallic Nanostructures

Hao Luo,Yong Zhi Cheng

DOI: https://doi.org/10.1142/s0217984917502311

2017-01-01

Modern Physics Letters B

Abstract:We present the design and numerical simulations of an ultrabroadband visible metamaterial absorber (MMA) with polarization-insensitive and wide-angle based on three-dimensional (3D) metallic nanostructure. Distinct from previous designs, the proposed visible MMA only consisted of structured 3D metallic film constructed with an assembly of four vertical split-rings (FVSR) structure. For the optimized design of our MMA, the absorbance of over 90% with a relative bandwidth of 94.8% can be obtained. Further simulation results indicate that our design is polarization-insensitive and also operated well in a wide range of incident angles for both TE and TM modes. In addition, the designed visible MMA design can tolerate some geometric parameters errors in fabrication. Thus, the proposed visible MMA can be potential application in the photodetectors, thermal imaging, photoelectrochemical, and solar energy harvesting devices.
Ultrathin wide-angle optical metamaterial absorber

jiaming hao,jing wang,min yan,min qiu

DOI: https://doi.org/10.1364/pv.2010.pwa4

2010-01-01

Abstract:We present design, analysis, and experimental demonstration of an ultra-thin, wide-angle perfect metamaterial absorber at optical frequency. The absorption is tunable by adjusting the nanostructure dimensions and is almost independent of the incidence angle.
Ultra-Thin Dual-Band Polarization-Insensitive and Wide-Angle Perfect Metamaterial Absorber Based on a Single Circular Sector Resonator Structure

Hao Luo,Yong Zhi Cheng

DOI: https://doi.org/10.1007/s11664-017-5770-8

IF: 2.1

2017-01-01

Journal of Electronic Materials

Abstract:We present a simple design for an ultra-thin dual-band polarization-insensitive and wide-angle perfect metamaterial absorber (PMMA) based on a single circular sector resonator structure (CSRS). Both simulation and experimental results reveal that two resonance peaks with average absorption above 99% can be achieved. The dual-band PMMA is ultra-thin with total thickness of 0.5 mm, which is <l/38 with respect to the operation frequencies. The surface electric field and current distributions of the unit-cell structure reveal the physical picture of the dual-band absorption. Numerical simulations demonstrate that the PMMA could retain high absorption level at large angles of polarization and incidence for both transverse electric (TE) and transverse magnetic (TM) modes. Furthermore, the absorption properties of the PMMA can be adjusted by varying the geometric parameters of the unit-cell structure.
Lithography-free, Broadband, Omnidirectional, and Polarization-Insensitive Thin Optical Absorber

Fei Ding,Lei Mo,Jianfei Zhu,Sailing He

DOI: https://doi.org/10.1063/1.4908182

IF: 4

2015-01-01

Applied Physics Letters

Abstract:We have proposed and experimentally demonstrated a lithography-free, broadband, thin optical absorber composed of planar multilayered dielectric and metal films, which can cover the total visible wavelength range with simulated and experimental absorption efficiencies higher than 90%. Moreover, the absorption is insensitive to the polarization and angle of incidence. Such a planar device is much easier to fabricate compared with other broadband absorbers with complicated structures and may have potential applications in solar energy harvesting and controllable thermal emission.
An Ultra-wide-angle Metasurface Absorber Operating in the Ultraviolet to Visible Range

Tong Li,Chengqing Bao,Pan Huang,Qian He,Guofeng Song

DOI: https://doi.org/10.1016/j.optcom.2024.130811

IF: 2.4

2024-06-22

Optics Communications

Abstract:Here, we propose an ultra-wide-angle metasurface absorber. It consists of a one-dimensional titanium grating periodic array with dislocation distribution. The average absorptivity of the absorber exceeds 94% in the ultraviolet to visible light band (200–760 nm) under normal TM-polarized incident wave. This benefits from the coupling of propagating surface plasmon resonance, local surface plasmon resonance, and hybrid mode resonance. For normal TE-polarized incident wave, the absorber achieves perfect narrowband absorption (>99.22%) in the ultraviolet light region because of the excitation of cavity-mode resonance. The absorber exhibits broadband absorption with an average absorptivity exceeding 85% in the visible light band because of the excitation of slot mode. These excellent absorption properties are well retained at 70° oblique incidence. The structural symmetry of the absorber dramatically expands the flexibility of device applications. It can achieve great absorption performance in an ultra-wide-angle range of 280° along the incident light direction. In addition, the absorber is sensitive to the polarization angle and incident angle of ultraviolet light, which can be used for ultraviolet detection and sensing. The proposed ultra-wide-angle metasurface absorber has potential application in the field of optical communication, photoelectric detection, and solar energy harvesting.

optics
Super Absorbing Ultraviolet Metasurface

Kai Liu,Suhua Jiang,Dengxin Ji,Xie Zeng,Nan Zhang,Haomin Song,Yun Xu,Qiaoqiang Gan

DOI: https://doi.org/10.1109/lpt.2015.2428621

IF: 2.6

2015-01-01

IEEE Photonics Technology Letters

Abstract:Although intensive research efforts have been performed to realize compact/portable metamaterial absorbers, the super absorbing metasurface for ultraviolet (UV) wavelengths has not been reported. Here, we propose an aluminum-based metal-dielectric-metal patterned structure to realize super absorption and strong field localization for UV wavelengths. Its feasibility to function as a high performance substrate for UV surface-enhanced Raman spectroscopy will also be discussed.
Ultra‐Broadband Wide‐Angle Polarization‐Independent Enhanced Absorber with Ultraviolet to Far‐Infrared Absorption Performance

Lejia Wu,Zhiwei Li,Wenjie Wang,Li Zhao,Hao Ruan

DOI: https://doi.org/10.1002/pssb.202200158

2022-06-17

Abstract:Ultra‐thin broadband metamaterial absorbers exhibit high absorptivity and broad bandwidths. Herein, we propose and simulate an ultra‐broadband wide‐angle polarization‐independent enhanced absorber with a metal‐insulator‐metal structure. The enhanced absorber exhibit ultra‐wideband characteristics from ultraviolet to far‐infrared range (0.35–10 μm), where it achieves an average absorption > 96%. It is insensitive to variations in the polarization state, exhibits a wide‐angle absorption because of a high degree of geometric symmetry, and shows a satisfactory absorption performance for a combination of different materials. Thus, the distinct structural characteristics of the device play a pivotal role in absorption. These advantages improve the flexibility of material selection in the design and manufacturing process of ultra‐broadband enhanced absorbers, thereby broadening their application potential in solar energy harvesting, infrared detectors, and thermal imaging. This article is protected by copyright. All rights reserved.

physics, condensed matter
Optical absorbers based on strong interference in ultra‐thin films

Mikhail A. Kats,Federico Capasso

DOI: https://doi.org/10.1002/lpor.201600098

2016-09-01

Abstract:Optical absorbers find uses in a wide array of applications across the electromagnetic spectrum, including photovoltaic and photochemical cells, photodetectors, optical filters, stealth technology, and thermal light sources. Recent efforts have sought to reduce the footprint of optical absorbers, conventionally based on graded structures or Fabry‐Perot‐type cavities, by using emerging concepts in plasmonics, metamaterials, and metasurfaces. Unfortunately, these new absorber designs require patterning on subwavelength length scales, and are therefore impractical for many large‐scale optical and optoelectronic devices. In this article, we summarize recent progress in the development of optical absorbers based on lossy films with thicknesses significantly smaller than the incident optical wavelength. These structures have a small footprint and require no nanoscale patterning. We outline the theoretical foundation of these absorbers based on “ultra‐thin‐film interference”, including the concepts of loss‐induced phase shifts and critical coupling, and then review several applications, including ultra‐thin color coatings, decorative photovoltaics, high‐efficiency photochemical cells, and infrared scene generators. Ultra‐thin optical absorbers are desired for many applications across the electromagnetic spectrum, including solar energy harvesting, photodetectors, optical filters, stealth technology, and thermal light sources. This review summarizes recent progress in the development of optical absorbers based on lossy films with thicknesses significantly smaller than the incident optical wavelength. The basic theory governing ultra‐thin‐film absorbers is discussed, along with application examples, including color coatings, decorative photovoltaics, photochemical cells, and infrared scene generators.

physics, condensed matter,optics, applied
Ultra-broadband absorber from visible to near-infrared using plasmonic metamaterial.

Lei Lei,Shun Li,Haixuan Huang,Keyu Tao,Ping Xu

DOI: https://doi.org/10.1364/OE.26.005686

IF: 3.8

2018-01-01

Optics Express

Abstract:We propose a design of an ultra-broadband absorber based on a thin metamaterial nanostructure composed of a periodic array of titanium-silica (Ti-SiO2) cubes and an aluminum (Al) bottom film. The proposed structure can achieve nearly perfect absorption with an average absorbance of 97% spanning a broad range from visible to near-infrared (i.e., from 354 nm to 1066 nm), showing a 90% absorption bandwidth over 712 nm, and the peak absorption is up to 99.8%. The excitation of superior surface plasmon resonance combined with the resonance induced by the metal-insulator-metal Fabry-Perot (FP) cavity leads to this broadband perfect absorption. The polarization and angle insensitivity is demonstrated by analyzing the absorption performance with oblique incidences for both TE- and TM-polarized waves. In addition, we discuss the impact of various metal materials and geometry structure on absorption performance in detail. The proposed broadband metamaterial absorber shows a promising prospect in applications such as solar cell, infrared detection, and imaging. Moreover, the use of a thin titanium cap and an aluminum film instead of noble metals has the potential to reduce production cost in applications. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Optically transparent conformal ultra-broadband metamaterial absorber based on ITO conductive film

Shijun Ji,Hailin Ren,Chenguang Zhang,Ji Zhao,Han Wu,Handa Dai

DOI: https://doi.org/10.1088/1361-6463/ace6b2

2023-07-13

Abstract:A metamaterial absorber with optical transparency and flexibility is proposed. To make it optically transparent, the substrate is made of polyvinyl chloride, and the pattern layer is made of a transparent conductive indium tin oxide film deposited in polyethylene terephthalate between the substrate and the top PVC. At the same time, indium tin oxide film is also introduced in the bottom layer. As a result, the entire structure has optical transparency. The metamaterial absorber was demonstrated by performing a full-wave electromagnetic simulation and measured in free space. Numerical simulation shows that 90% absorption bandwidth ranged from 6.54-18.66 GHz, 97% bandwidth ranged from 6.54-18.66 GHz. Due to its symmetrical shape, the absorber is not sensitive to polarization. When the incidence Angle is more than 60 degrees, the absorption rate of the absorber can still be more than 85%. Finally, the experimental verification is in good agreement with the numerical simulation, which verifies the accuracy of the results.

physics, applied
Thermally Tunable Broadband Omnidirectional and Polarization-Independent Super Absorber Using Phase Change Material VO2

Zhejun Liu,Mingyu Zhao,Jun Gao,Yuesheng Li,Suhua Jiang

DOI: https://doi.org/10.1016/j.rinp.2017.09.039

IF: 4.565

2017-01-01

Results in Physics

Abstract:In this letter, we numerically demonstrate a thermally tunable super absorber by using phase change material VO2 as absorbing layer in metal-insulator-metal structure. An omnidirectional super absorption at λ=2.56μm can be realized by heating the patterned grating VO2 film due to magnetic resonance mechanism. Furthermore, a broadband super absorption higher than 0.8 in the entire 1.6μm–4μm region is achieved when VO2 film is patterned chessboard structure and transformed to metal phase beyond transition temperature. This broadband super absorption can be fulfilled in a wide range of incident angle (0°–70°) and under all polarization conditions.
Numerical study of an ultra-broadband, wide-angle, polarization-insensitive absorber in visible and infrared region

Yang Wang,Xue-Fei Xuan,Lu Zhu,Hai-Jun Yu,Qiang Gao,Xian-Lei Ge

DOI: https://doi.org/10.1016/j.optmat.2021.110902

IF: 3.754

2021-04-01

Optical Materials

Abstract:<p>An ultra broadband high-performance metamaterials absorber is designed based on the Fabry-Perot resonance effect and hybrid coupling theory. In this paper, we use the numerical method to analyze the absorption characteristics of the absorber under the conditions of wide band, different polarization states and large angle oblique incidence. The results reveal that the absorption band of the absorber is 300 nm–3000 nm, and its average absorption rate exceeds 93%. In addition, the absorptivity of the absorber is less affected by the polarization angle and incident angle of the incident light. The physical mechanism of wide-band high-absorption is analyzed, which is mainly caused by Fabry-Perot resonance, surface plasmon resonance, local surface plasmon resonance and the hybrid coupling among them. The proposed metamaterial absorber is expected to play a role in invisible devices, solar cells and other fields owing to its wide absorption bandwidth, high absorption, independent to polarization and stable at wide-angle of incidence.</p>

materials science, multidisciplinary,optics
Polarization-independent and Omnidirectional Nearly Perfect Absorber with Ultra-Thin 2D Subwavelength Metal Grating in the Visible Region

Wenchao Zhou,Kaiwei Li,Chao Song,Peng Hao,Mingbo Chi,Muxin Yu,Yihui Wu

DOI: https://doi.org/10.1364/oe.23.00a413

IF: 3.8

2015-01-01

Optics Express

Abstract:A polarization-independent and omnidirectional nearly perfect absorber in the visible region has been proposed. The absorber is two-layer structure consisting of a subwavelength metal grating layer embedded in the high refractive index and lossless dielectric layer on the metal substrate. Extraordinary optical absorption with absorption peaks of over 99% can be achieved over the whole visible region for both TM and TE polarization. This absorption is attributed to cavity mode (CM) resonance caused by the coupled surface plasmon polaritons (SPP). Through adjusting the grating thickness, the absorption peak can be tuned linearly, which is highly advantageous to design various absorbers. Furthermore, the absorbance retains ultra-high over a wide angular range of incidence for both TM and TE polarization. This nearly perfect absorber offers great potential in the refractive index (RI) sensors, integrated photodetectors, solar cells and so on.
An Ultra-Flexible Plasmonic Metamaterial Film for Efficient Omnidirectional and Broadband Optical Absorption

Hui Zhang,Lei Feng,Yuzhang Liang,Ting Xu

DOI: https://doi.org/10.1039/c8nr05276j

IF: 6.7

2019-01-01

Nanoscale

Abstract:An omnidirectional and broadband optical absorber has long been pursued for its wide application in optics, sensing and energy fields. The recent development of flexible and non-planar optoelectronic devices, however, poses a great challenge to fabricate an optical absorber with excellent mechanical flexibility. Here, based on a facile solution method, we demonstrate an ultra-flexible plasmonic metamaterial film (PMF), which is a composite of gold nanoparticles (Au NPs) and aramid nanofibers, to achieve omnidirectional and broadband optical absorption. Due to the comprehensive contributions of the anti-reflection effect of the PMF surface, localized surface plasmon resonances of the Au NPs, and non-resonant decay of light inside the nanocomposite, the PMF exhibits highly efficient omnidirectional and broadband absorption at visible and near-infrared frequencies. In addition, it also presents exceptional mechanical and fast collective light-heating properties, which makes it promising to be applied on flexible and non-planar photo-thermal devices.
Ultra-broadband Metamaterial Absorber from Visible to Long-Wave Infrared

Cuiping Ma,Baoqing Wang,Peng Yu,Zhiming Wang

DOI: https://doi.org/10.1109/icoim60566.2023.10491534

2023-01-01

Abstract:Metallic resonators separated by dielectric films with vertically stacked configurations is a common way to achieve broadband absorption. Here, we theoretically propose an ultra-broadband metamaterial absorber, which consists of an array of nanowire coated with multiple layers of alternating Ti and ZnS nanorings. The average absorption is calculated to be 98.8% in the spectral range of 0.4 to 17 μm. The performance of the proposed absorber is robust against a large change of both the incident and polarization angles. The proposed absorber may find potential applications in photovoltaics, photodetectors and manipulation of mechanical resonances.
An optically transparent and ultra-wideband absorber based on multi-layer structure

Xinru Lu,Juan Chen,Zhenghui Peng,Zixian Wu,Anxue Zhang

DOI: https://doi.org/10.1109/CSQRWC.2019.8799188

2019-01-01

Abstract:An optically transparent and ultra-wideband meta-material absorber (MA) using multi-layer structure is proposed in this paper. The MA is made of indium thin oxide (ITO) films and transparent plastic. According to the simulation, the MA realizes high absorption over 80% during 3 ~24.5 GHz for both transverse electric (TE) and transverse magnetic (TM) incidences. The MA also shows stable absorbing capability for oblique incidences of <; 40°. The optical transparency and good absorption performance make the MA can be a promising candidate for the application of transparent stealth.

Super Meta-Absorber for Ultra-Thin OPV Films

Omnidirectional, Thin Metasurface Exhibiting Selective Absorption for Un-Polarized Broadband Incidence

Compact Multilayer Film Structures for Ultrabroadband, Omnidirectional, and Efficient Absorption

Large-Area, Omnidirectional Metasurface Exhibiting Unpolarized Broadband Absorption

Wide-Angle and Polarization-Insensitive Perfect Absorber for Organic Photovoltaic Layers

Design of an Ultrabroadband Visible Metamaterial Absorber Based on Three-Dimensional Metallic Nanostructures

Ultrathin wide-angle optical metamaterial absorber

Ultra-Thin Dual-Band Polarization-Insensitive and Wide-Angle Perfect Metamaterial Absorber Based on a Single Circular Sector Resonator Structure

Lithography-free, Broadband, Omnidirectional, and Polarization-Insensitive Thin Optical Absorber

An Ultra-wide-angle Metasurface Absorber Operating in the Ultraviolet to Visible Range

Super Absorbing Ultraviolet Metasurface

Ultra‐Broadband Wide‐Angle Polarization‐Independent Enhanced Absorber with Ultraviolet to Far‐Infrared Absorption Performance

Optical absorbers based on strong interference in ultra‐thin films

Ultra-broadband absorber from visible to near-infrared using plasmonic metamaterial.

Optically transparent conformal ultra-broadband metamaterial absorber based on ITO conductive film

Thermally Tunable Broadband Omnidirectional and Polarization-Independent Super Absorber Using Phase Change Material VO2

Numerical study of an ultra-broadband, wide-angle, polarization-insensitive absorber in visible and infrared region

Polarization-independent and Omnidirectional Nearly Perfect Absorber with Ultra-Thin 2D Subwavelength Metal Grating in the Visible Region

An Ultra-Flexible Plasmonic Metamaterial Film for Efficient Omnidirectional and Broadband Optical Absorption

Ultra-broadband Metamaterial Absorber from Visible to Long-Wave Infrared

An optically transparent and ultra-wideband absorber based on multi-layer structure