Abstract:It is crucial to reveal the energy conversion and heat and mass transfer characteristics in the electric arc furnaces (EAFs). In this paper, a transient mathematical model was built to adequately capture the distribution of multi-physical fields in EAF. The numerical modeling method was verified against brown corundum smelting experiment data. In addition, the influence on the brawn corundum smelting process of the typical operating parameters has been examined, and the major problems which limit the performance improvement of smelting were analyzed. Moreover, four indicators were proposed to comprehensively evaluate the EAF performance, consisting of liquid volume fraction β, energy efficiency η, temperature rise index ς, and temperature uniformity index ξ. Furthermore, the optimal combination of operating parameters was selected automatically based on the back propagation (BP) neural network predicting model and non-domestic sorting genetic algorithm II (NSGA-II). The results showed that the local overheating phenomenon is serious and that homogenizing the energy distribution in the furnace is the key to improving the melting performance. Increasing electrode immersion and voltage can significantly increase the rate of heat and mass transfer. In the case of ψ = 0.75, υ = 0.6, when χ is increased from 0.2 to 0.6, τmax is shortened by 13.3% and ηmax is increased by 12.0%. While with ψ = 0.75 and χ = 0.4, τmax is reduced by 36.0% when υ increases from 0.2 to 1.0, but ηmax is also decreased by 7.0%. It was found that decreasing the height diameter ratio will improve the overall EAF smelting performance, but it also increases the area of heat loss. In the case of χ = 0.4, υ = 0.6, ξave and ηmax improved by 3.1 and 14.5%, respectively, when ψ decreases from 1.0 to 0.5. The EAF performances are considerably enhanced in comparison to the operating basic parameters (ψ = 0.75, χ = 0.4 and υ = 0.6), subject to optimal operation parameters (ψ = 0.61, χ = 0.59 and υ = 0.59). In this case, τmax and ςmax reduced by 6.2 and 4.1%, respectively, while ηmax and ξave increased by 6.8 and 1.0%, respectively.

PRODUCTION ENHANCEMENT AND OPERATION PARAMETER'S OPTIMIZATION OF THE FLASH SMELTING FURNACE BASED ON NUMERICAL SIMULATION

Improved Optimization Method for Blast Furnace Based on Robust Soft Sensor and Process Knowledge

Data/mechanism Hybrid-Driven Modeling of Blast Furnace Smelting System and Global Sequential Optimization

A Multi-Objective Optimization Model Based on Long Short-Term Memory and Non-Dominated Sorting Genetic Algorithm II

The study of heat-mass transfer characteristics and multi-objective optimization on electric arc furnace

Simulation of temperature field of sintering ignition furnace

Mathematical Model of Multistage and Multiphase Chemical Reactions in Flash Furnace

Numerical Investigation of the Limit of Coke Rate Reduction in an Ironmaking Blast Furnace (BF)

Application of Numerical Simulation and New Fining Index in Operating Parameters Optimization of Float Glass-Melting Furnace

Numerical simulation of the effect of sulfide concentrate particle size on pollutant emission from flash smelting furnace

Numerical simulation of combustion and melting process in an aluminum melting Furnace: A study on optimizing stacking mode

Numerical Simulation of Vanadium–Titanium Blast Furnace under Different Smelting Intensities

Numerical analysis and process optimization of electron beam melting for superalloys

Thermo-mechanical simulation and parameters optimization for beam blank continuous casting

Mathematical Simulation on Blast Furnace Operation of Coke Oven Gas Injection in Combination with Top Gas Recycling

Optimization of HIsmelt reactor parameters for efficient combustion and heat transfer by numerical simulation

Numerical Simulation on Blast Furnace Operation with Hot Burden Charging

Numerical Simulation of the Effect of Feeding Mode on the Reduction of Ore Powder in Hydrogen‐Based Flash Ironmaking Process

Enhancing Efficiency in Electric Arc Furnace Steelmaking: A Multi‐Objective Optimization Approach Using the Non‐Dominated Sorting Genetic Algorithm II

Numerical modeling and parameter optimization of the combustion chamber in a tower-type zinc refining furnace

Process Metallurgy and Genetic Algorithm Multi‐Objective Optimization of Blast Furnace Hearth Working State