Abstract:The online monitoring of metal particles in lubricating oil plays an important role in equipment fault diagnosis technology. This paper designs an online wear monitoring warning sensor based on the electromagnetic induction of metal particles in lubricating oil. First, different from the traditional three-coil sensing and detection method, the sensor consists of two excitation coils and one detection coil. In addition, the parallel capacitance and detection capacitance parameters are obtained by COMSOL’s scanning frequency, and the best detection capacitance is 7.53 nF. Second, according to the obtained optimal detection parallel capacitance value, the amplitude data of the particle signal, as well as the ferromagnetic particles above 60 μm and the non-ferromagnetic particles above 80 μm, are obtained. Third, according to the principle of three-coil induction, a mapping relationship model was established between the size range of metal wear particles in lubricating oil. Finally, we set up an oil wear particle platform to verify the sensor performance. The ferromagnetic and non-ferromagnetic particles are divided into multiple size ranges, and the peak-to-peak values of the output signal of different-sized wear particles are measured. We developed a prototype sensor and verified the signal consistency and repeatability of the sensor to wear metal particles. In addition, we used the sensor to test a large number of metal particles of different sizes (14 ferromagnetic particle standard samples with particle sizes ranging from 20.64 to 457.59 μm and ten non-ferromagnetic particle standard samples with particle sizes ranging from 40.52 to 348.07 μm). The experimental results show that the sensor can directly achieve monitoring sensitivity for ferromagnetic particles greater than 64.57 μm and non-ferromagnetic (copper) particles greater than 82.83 μm under the 4.2 mm aperture flow channel. The sensor can effectively realize the sensitivity on monitoring of small ferromagnetic particles and non-ferromagnetic particles, and it is particularly sensitive to small non-ferromagnetic particles.

Design and Experimental Test of an On-Line Particle Detection Sensor Based on Symmetrical Magnetic Field

Design and experimental research of abrasive particle detection sensor based on coil magnetic field

An online wear metal particles monitoring warning sensor based on electromagnetic induction in lubricating oil

A Ferromagnetic Wear Particle Sensor Based on a Rotational Symmetry High-Gradient Magnetostatic Field

A Three-Coil Wear Particle Sensor Based on Radial Magnetic Field

Study on a High Sensitive Online Sensor for Wear Particles in Lubricant

A Passive Ferro-Particle Sensor of Lube-Oil Based on Single Permanent Magnetic Ring

Investigation of the Effect of Debris Position on the Detection Stability of a Magnetic Plug Sensor Based on Alternating Current Bridge

A Ferromagnetic Particle Sensor Based on a Honeycomb Permanent Magnet for High Precision and High Throughput

Online Symmetric Magnetic Excitation Monitoring Sensor for Metal Wear Debris

On-line abrasive particle monitoring method and monitoring sensor based on bilateral symmetric structure of the radial magnetic field

Inductive Magnetic Nanoparticle Sensor based on Microfluidic Chip Oil Detection Technology

An Inductive Debris Sensor Based on a High-Gradient Magnetic Field

Simulation and Optimization Design of Inductive Wear Particle Sensor

The Design and Study of a Four-Coil Oil Multi-Pollutant Detection Sensor

Magnetization Model and Detection Mechanism of a Microparticle in a Harmonic Magnetic Field

Research on High Sensitivity Oil Debris Detection Sensor Using High Magnetic Permeability Material and Coil Mutual Inductance

Capacitive–Inductive Magnetic Plug Sensor With High Adaptability for Online Debris Monitoring

An Inductive Sensor with a Biased Magnetic Field to Distinguish Wear Debris by Magnetism and Conductivity

Design and Parameter Research of Time-Harmonic Magnetic Field Sensor Based on PDMS in Microfluidic Technology

Wear Debris Sensor Using Intermittent Excitation for High Sensitivity, Wide Detectable Size Range, and Low Heat Generation