Abstract:The dislocation structure formation under low-amplitude fatigue in fcc metals for multislip loading conditions is investigated using three-dimensional discrete dislocation dynamics. Tools based on graph analysis, a statistical description of stable dislocation arrangements such as dislocation dipoles and prismatic loops are developed and applied. Upon decreasing the loading amplitude one order of magnitude below the persistent slip band threshold, although qualitative microstructural differences are seen, the elementary features of the investigated defects are the same. A critical number of cycles is required to produce sessile Lomer junctions that stabilize the structure and result in dislocation clustering around them. The crystallographic orientation of the crystal with respect to the loading axis results in different patterns strongly linked to sessile junctions, which are analyzed using spatial correlation functions. The increase in irreversible bulk dislocation arrangements results in roughening of the free surface and increase in surface step heights. Furthermore the crystallographic orientation with respect to the free surface is shown to control the dislocation density evolution combined with the macroscopic Schmid factor. Mechanical fatigue due to cyclic loading remains one of the most challenging problems in materials science. For fcc metals, low- and high cycle fatigue have been thoroughly studied experimentally [ 1 – 8 ]. Fatigue failure in fcc metals is found to be often due to surface roughening with increasing number of loading cycles, leading finally to stress concentration and eventually incipient crack initiation. It is well established that dislocations form persistent slip bands (PSBs) causing surface roughness [ 9 – 13 ]. Irreversible dislocation structures are composed primarily of dislocation dipoles and prismatic loops. Earlier in the 1960s several experimental groups investigated those elementary dislocation arrangements and discovered the important role of prismatic dislocation loops in strain hardening [ 14 , 15 ] and identified cross-slip as a necessary mechanism required for their formation [ 16 , 17 ]. Quantification of prismatic loops in terms of shape and type as well as more precise description of the formation mechanism were given by Feltner [ 18 , 19 ]. More recently, unexpected failure of technical applications in the very high cycle fatigue regime (VHCF) for more than 10 7 cycles and below the PSB-threshold caused to readdress the concept of fatigue limit. Ultrasonic- [ 20 ] and piezoelectric [ 21 , 22 ] modern fatigue testing facilities with loading frequencies up to 20 kHz were developed to investigate this problem. Similar to low cycle fatigue, it was shown by [ 23 , 24 ] that fatigue failure in polycrystalline copper in the VHCF-regime is due to cyclic strain localization within PSBs. Nonetheless, details and mechanisms of the microstructural behavior at the dislocation level remain unexplored. Since dislocation structure formation is controlled by geometrical dislocation arrangement due to elastic interactions between dislocations, the meso-scale simulation method discrete dislocation dynamics (DDD) gives detailed insight into the structure formation mechanisms. Furthermore the role of microstructural parameters, e.g. grain shape and orientation, on structure correlations is accessible. Several groups have used DDD under cyclic loading to explore the mechanisms leading to irreversible dislocation structure formation. A detailed analysis of single- and double slip loading conditions were given in [ 25 , 26 ]. It was shown that an initial single Frank–Read source can yield, due to annihilation and cross-slip processes only, a dipolar dislocation microstructure which shows good agreement with experiments. It was found that slip band spacing was inversely proportional to the square of the slip band thickness. The authors stress the role of cross-slip for strain localization and show that double slip conditions lead to more damage than single slip. Based on statistical distribution of dipole heights, the same group [ 27 ] derived a model which could reproduce precisely an experimental hysteresis loop. In [ 28 ] results using DDD showed the role of source position, character and length on prismatic loop development while molecular dynamics demo -Abstract Truncated-

Characterization of Dislocation Wall Spacing Distributions

Determination of Boundary Area and Spacing in Prismatic Structures with Applications to Dislocation Boundaries

High Strain Gradient Plasticity Associated with Wedge Indentation into Face-Centered Cubic Single Crystals: Geometrically Necessary Dislocation Densities

A continuum model for distributions of dislocations incorporating short-range interactions

Internal structures of deformation induced planar dislocation boundaries

Crystal plasticity-inspired statistical analysis of dislocation substructures generated by continuum dislocation dynamics

High-Resolution Methods for Characterizing Mesoscale Dislocation Structures

Characterization and Influence of Deformation Microstructure Heterogeneity on Recrystallization

Resolving localized geometrically necessary dislocation densities in Al-Mg polycrystal via in situ EBSD

Strain rate dependency of dislocation plasticity

The Dissociation Behavior of Dislocation Arrays in Face Centered Cubic Metals

Discrete Dislocation Dynamics Simulations of Surface Induced Size Effects in Plasticity

Microplasticity and yielding in crystals with heterogeneous dislocation distribution

Statistical analysis of Discrete Dislocation Dynamics simulations: initial structures, cross-slip and microstructure evolution

3D Microstructural and Strain Evolution During the Early Stages of Tensile Deformation

First-Principles Study of Physical Properties of (110) Symmetric Small-Angle Tilting Grain Boundary with Full Dislocation in Aluminum

Dislocation Phenomena Described with Free Volume Concept and Eyring's Rate Process Theory

Characterization and visualization of grain boundary disconnections

Analysis of dislocation microstructure characteristics of surface grains under cyclic loading by discrete dislocation dynamics

Unconventional Cracks with Dislocation-Free Zones

The Effect of Specimen Thickness on the Dislocation-Free Zone Model of Fracture