Abstract:Long period gratings (LPG)-based sensors are widely used due to their high sensitivity to a range of suitable measurands. However, a typical configuration involving a single grating-based LPG sensor system frequently has the disadvantage of the probe being used in transmission mode. Further, the broad bandwidth of the attenuation bands formed by the propagation mode coupling between the core and the cladding modes constitutes a difficulty when the device is used as a conventional sensor probe. To overcome these limitations, a Michelson interferometer-type sensor configuration has been developed, using a LPG grating pair formed by coating a mirror at the distal end of the LPG. This sensor configuration is more convenient to use and is able to overcome the limitations of the single LPG sensor due to the shifts in the attenuation bands being more easily detectable. As part of work to develop an optimum configuration for the probe, a series of tests has been carried out to determine the most suitable distance between the LPG and the mirror coating for a typical grating (LPG) of period 250μm. The sensor thus developed was then calibrated for use for temperature and refractive index measurement. In this paper, the design of a LPG coated with polyvinyl alcohol (PVA) as a relative humidity (RH) sensor and used in the Michelson interferometer configuration is reported. PVA, which swells with the increase of RH in its surroundings, causes a change in the refractive index of the coated polymer layer which was observed by tracking the response of the resonance loss band of the LPG to varying RH levels. The distal end of the fibre containing the LPG has been coated with a silver mirror in order to track the shift of the resonance loss band in reflection and to achieve a high resolution. The sensor was evaluated by being subjected to humidity changes over a RH range from 20% to 85% and an excellent detection performance was obtained while retaining the sensitivity of the PVA coated sensor.

Refractive Index Sensor Employing Pva-Coated Long Period Grating Technology

Analysis of the Characteristics of PVA-Coated LPG-Based Sensors to Coating Thickness and Changes in the External Refractive Index

Optical Fibre Refractive Index Sensor in a Hybrid Fibre Grating Configuration

Highly Sensitive Long Period Fiber Grating Refractive Index Sensor Based on Thin Cladding

Refractive Index Sensors Based on Long-Period Fiber Gratings

Pressure sensing in high-refractive-index liquids using long-period gratings nanocoated with silicon nitride

Refractive Index Sensing Based on a Long Period Grating Imprinted on a Multimode Plastic Optical Fiber

Fibre Optic Long Period Grating-Based Humidity Sensor Probe Using a Michelson Interferometric Arrangement

Highly Sensitive Refractive Index Sensor Based on Two Cascaded Long Period Gratings with Rotary Refractive Index Modulation

Study of a Highly Sensitive Refractive Index Sensor Designed with a Subwavelength Grating

Optical Refractive Index Sensor Designed by Using a Composite Subwavelength Grating

Refractive Index Sensing by Using Mechanically Induced Long-Period Grating

An Ultrasensitive Long-Period Fiber Grating-Based Refractive Index Sensor With Long Wavelengths

Optimization of Long-Period Grating-Based Refractive Index Sensor by Bent-Fiber Interference

LPG-based PVA Coated Sensor for Relative Humidity Measurement

Investigation of a D-Shaped Plastic Optical Fiber Assisted by a Long Period Grating for Refractive Index Sensing

Highly Sensitive Refractive Index Sensor Based on Polymer Long-Period Waveguide Grating with Liquid Cladding

Power-type Liquid-Level Sensor for High Refractive Index Liquid Based on Long-Period Fiber Grating

High-sensitivity sensor design based on cascaded long-period fiber grating with film coating

Long period gratings imprinted on the commercial plastic optical fibers for refractive index sensing