Abstract:Electronic devices are progressively fabricated on flexible substrates allowing new fields of applications. A maskless and very flexible structuring process is offered by ablation using ultra-short pulse laser irradiation. Usually, certain areas of a functional thin film coating are locally removed to yield the needed device structures. Micro laser patterning quality is not only influenced by the beam properties (beam profile, fluence) but also by pulse overlap, scan repetitions and many other factors such as substrate and coating material. This makes process parameter optimization a challenging task. In this paper, we present a systematic approach to efficiently find suitable parameters for laser-induced ablation of thin films on susceptible polymer substrates. As an example, we use a sputtered NiCr coating with a thickness of 100 $nm$ on a polyimide film made by spin coating of PI-2611 precursor (@ 2000 $rpm$ > ca. 8 ${\mu}m$, HD microsystems). Irradiation is conducted using a fs-laser with infrared wavelength of 1030 $nm$ and a pulse length of 212 $fs$. The energy per pulse is varied in the range of 0,29 ${\mu}J$ to 4,83 ${\mu}J$, yielding fluence values between 70 $mJ/cm^2$ and 1,11 $J/cm^2$. Ablation threshold fluence for a 100 $nm$ layer of NiCr was found to be ${\phi}_{th}$ ($N_P$:1)=0,50 $J/cm^2$ and the incubation factor was evaluated to be ${\xi}$=0,53. A clear distinction must be made between the material ablation at the surface of a bulk material and the selective removal of a thin film. In the second case effects such as flaking occur in practice and influence the ablation characteristic. We then investigate different varieties of thin film removal including dot-, line- and areal-ablation. The methodology is presented using a practical example, but can be applied to selective ablation of a wide range of thin film systems.

Photoablative Etching of Materials for Optoelectronic Integrated Devices

Ultraviolet Laser Ablation of Organic Polymer Films

Methodology of selective metallic thin film ablation from susceptible polymer substrate using pulsed femtosecond laser

EUV ablation of organic polymers at a high fluence

Sapphire Selective Laser Etching Dependence on Radiation Wavelength and Etchant

Selective laser etching of displays: Closing the gap between optical simulations and fabrication

Laser Etching Processes : Towards Sub-Picosecond X-UV Irradiation

Laser-induced photoelectrochemical lithography

Influence of flexible multibeam intensity distributions on selective laser-induced etching process regimes

Selective Delamination upon Femtosecond Laser Ablation of Ceramic Surfaces

Pulsed Laser Ablation Characteristics of Light-Absorbing Mask Layer Based on Coating Thicknesses under Laser Lift-Off Patterning Process

Dry Etching of Germanium with Laser Induced Reactive Micro Plasma

Controlled photothermal ablative processing of commercial polymers minimizing undesired thermal effects under high frequency femtosecond laser irradiation

Microoptical Elements Fabricated with Single Step

Formation of Deep-Subwavelength Structures on Organic Materials by Femtosecond Laser Ablation

Laser-induced liquid-phase jet-chemical etching of metals

Understanding Etch Properties of Advanced Chemically Amplified EUV Resist

Femtosecond laser micro-structuring of amorphous polyether(ether)ketone at 775 nm and 387 nm

Microscopic deprotection mechanisms and acid loss pathways of chemically amplified photoresists for deep/extreme ultraviolet photolithography

Surface adhesion of back-illuminated ultrafast laser-treated polymers

Precise photoelectrochemical tuning of semiconductor microdisk lasers