High Strain Epoxy Shape Memory Polymer

Ning Zheng,Guangqiang Fang,Zhengli Cao,Qian Zhao,Tao Xie

DOI: https://doi.org/10.1039/c5py00172b

IF: 4.6

2015-01-01

Polymer Chemistry

Abstract:Epoxy polymers represent a recently emerged class of thermoset shape memory polymers with superior thermo-mechanical endurance and excellent processability.

What problem does this paper attempt to address?

Thermadapt Shape Memory Polymer

Ning Zheng,Tao Xie

DOI: https://doi.org/10.11777/j.issn1000-3304.2017.17161

2017-01-01

Acta Polymerica Sinica

Abstract:As a class of smart materials, shape memory polymers have gained considerable interest in recent years due to their unique shape changing behaviors. Recent advances in shape memory polymer field have led to the emergence of various exciting applications, including deployable biomedical devices and aerospace structures. Beyond the traditional shape memory effect (one way dual-shape memory effect), the recently emerged properties (triple-, multi-and two way shape memory effects) have drastically expanded their potential application. However, these properties focus mainly on the temporary shape manipulation, and the attention on the permanent shapes has been largely ignored. Unlike the classical thermoplastic and thermoset shape memory polymers, the recently emerged shape memory polymers with dynamic covalent bonds in the network have opened up new opportunities in manipulating its permanent shape. Dynamic covalent polymer networks have long been recognized. Early work focused mainly on minimizing stress relaxation in commercial network polymers to improve their mechanical properties. Since 1990's, the attention has been shifted towards purposeful design of dynamic covalent polymer networks with unique adaptive properties, including self-healing and thermoset reprocessing properties. Several new terms (dynamer, CAN, and vitrimer) have been proposed to emphasize the uniqueness of these polymer networks with dynamic covalent bonds. However, these past efforts have been mostly limited to basic research due to the inherently niche chemistry involved. In this article, we briefly overview recent progresses in dynamic covalent polymer networks and shape memory polymers, which sets the stage for further discussion on recently emerged dynamic covalent shape memory polymer networks. On account of the general applicability of the dynamic covalent bonds (e.g. esters and urethanes) involved as well as unique macroscopic properties (solid state plasticity), we propose that dynamic covalent shape memory polymers can form a third class of shape memory polymers, thermadapt shape memory polymers, alongside the widely known thermoplastic and thermoset shape memory polymers.
Shape Memory Epoxy: a Systematic Study of Their Performance

Ingrid A. Rousseau,Tao Xie

DOI: https://doi.org/10.1117/12.815518

2009-01-01

Abstract:Seven epoxy-amine polymers showing shape memory (SM) properties were synthesized. Tunable thermal and mechanical properties with glass transition temperatures ranging from 44 to 93 °C were obtained by varying the molecular structures. The epoxy showed excellent SM properties with shape fixity and shape recovery reaching completeness above about 5% strains. The instantaneous SM behavior was found to be independent of materials structure or properties; however, more stringent experimental conditions were found to be detrimental to SM properties for the networks with lower crosslink density and/or higher molecular flexibility/mobility. Indeed, the impact of the shape memory cycling conditions on the SM behavior was investigated. Specifically, the deformation load, the recovery heating rate, the number of SM cycles, and the holding time in the deformed or temporary shape were varied. The mechanical and SM properties of the materials were characterized using dynamic mechanical analysis in tensile mode.
Shape Memory Epoxy: Composition, Structure, Properties and Shape Memory Performances

Ingrid A. Rousseau,Tao Xie

DOI: https://doi.org/10.1039/b923394f

2010-01-01

Journal of Materials Chemistry

Abstract:Due to the intrinsic properties of polymers, medical applications have been the primary targets for the development of shape memory polymers (SMPs) exhibiting softness at body temperature, biocompatibility, high deformability, good shape recovery (Rr) and good shape fixity (Rf). However, there is an increasing need for developing smart materials that would meet the drastically different requirements imposed by applications where, instead, high strength well above room temperature, durability, stability, and high thermo-mechanical endurance are necessary. Here, we present results obtained on a series of shape memory (SM) epoxies that appear promising base materials for such applications. The influence of molecular and structural design on their physical and SM properties were studied. The impact of various SM programming conditions (i.e., deformation load, recovery heating rate, number of cycles, and isothermal holding times in the hot and cold deformed shapes) was also investigated. The instantaneous SM behavior was found similar for all the networks with Rf and Rr values nearing 100% above 6 to 7% strain. The SM performances strongly depended on the strain-dependent thermal expansion/contraction of the materials during thermo-mechanical cycling. Networks with lower crosslink density, higher chain flexibility and/or mobility showed reduced SM performances, further diminished by more stringent thermo-mechanical cycling conditions.
One-way Shape Memory Behavior of Thermoplastic Polyolefin Elastomers

HUANG Limei,GUO Song,ZHAO Qian,XIE Tao,LI Bogeng

DOI: https://doi.org/10.11949/j.issn.0438-1157.20151234

2016-01-01

Abstract:Thermoplastic polyolefin elastomers which are soft and easy processing have potential usage for non-structural applications. The thermal, mechanical and shape memory properties of this thermoplastic elastomers were investigated with differential scanning calorimetric (DSC) and dynamic mechanic analysis (DMA). The results showed that was important for the better shape memory with both of the shape fixity rate and shape recovery rate up to 90%can be reached by choosing a proper deforming temperature in a broad range of melting temperature.
Relationship Between Materials Properties and Shape Memory Behavior in Epoxy-Amine Polymers

Rousseau Ingrid A.,Xie Tao

DOI: https://doi.org/10.1557/proc-1190-nn01-08

2009-01-01

Abstract:Although epoxy-based polymers remain infrequently used as shape memory polymers (SMP’s), they are a promising base material for highly demanding applications due to their intrinsic physical properties and ease of processing. A series of epoxy SMP’s was synthesized with varying mechanical properties and with glass transition temperatures ranging from 31 to 93 °C, tunable via the variations of the molecular structures. The influence of chemical structures and physical properties of these epoxy SMP’s on their shape memory (SM) behavior is examined in detail along with the impact of the shape memory cycling conditions. While the results show that lower crosslink densities and/or higher molecular flexibility/mobility leads decreased SM performance, at low crosslink density the effect of molecular flexibility/mobility becomes dominant in influencing the SM response.
Shape Memory Polymer Network with Thermally Distinct Elasticity and Plasticity

Qian Zhao,Weike Zou,Yingwu Luo,Tao Xie

DOI: https://doi.org/10.1126/sciadv.1501297

IF: 13.6

2016-01-01

Science Advances

Abstract:Stimuli-responsive materials with sophisticated yet controllable shape-changing behaviors are highly desirable for real-world device applications. Among various shape-changing materials, the elastic nature of shape memory polymers allows fixation of temporary shapes that can recover on demand, whereas polymers with exchangeable bonds can undergo permanent shape change via plasticity. We integrate the elasticity and plasticity into a single polymer network. Rational molecular design allows these two opposite behaviors to be realized at different temperature ranges without any overlap. By exploring the cumulative nature of the plasticity, we demonstrate easy manipulation of highly complex shapes that is otherwise extremely challenging. The dynamic shape-changing behavior paves a new way for fabricating geometrically complex multifunctional devices.
A Molecular Dynamics Investigation of the Deformation Mechanism and Shape Memory Effect of Epoxy Shape Memory Polymers

Hua Yang,ZhengDao Wang,YaFang Guo,XingHua Shi

DOI: https://doi.org/10.1007/s11433-015-5758-4

2016-01-01

Science China Physics Mechanics and Astronomy

Abstract:Following deformation, thermally induced shape memory polymers(SMPs) have the ability to recover their original shape with a change in temperature. In this work, the thermomechanical properties and shape memory behaviors of three types of epoxy SMPs with varying curing agent contents were investigated using a molecular dynamics(MD) method. The mechanical properties under uniaxial tension at different temperatures were obtained, and the simulation results compared reasonably with experimental data. In addition, in a thermomechanical cycle, ideal shape memory effects for the three types of SMPs were revealed through the shape frozen and shape recovery responses at low and high temperatures, respectively, indicating that the recovery time is strongly influenced by the ratio of E-51 to 4,4’-Methylenedianiline.
Shape Memory Polymers with Regionally Defined Glass Transition Temperature via Digital Photocuring

Guan-cong Chen,Zi-zheng Fang,Yu-kun Hou,Zhang-fa Tong,Qian Zhao

DOI: https://doi.org/10.11777/j.issn1000-3304.2019.18229

2019-01-01

Acta Polymerica Sinica

Abstract:Thermal transition temperatures (e.g. glass transition temperatures) play an important role in various applications of shape memory polymers that can recover from temporary shapes to original (permanent) shapes upon heating. This study reports a shape memory epoxy with unsaturated double bonds, enabling a secondary photocuring process. Dual-functional epoxy monomer, E44, and monofunctional epoxy monomer, glycidyl methacrylate, are first thermally cured via a polyether amine crosslinker. Properties of the cured epoxy can be finely tuned by controlling the feed compositions. The increase of feed ratio of glycidyl methacrylate will lead to lower glass transition temperature and elastic modulus, whereas larger strain at break. In the secondary photocuring process, the unsaturated bonds provided by glycidyl methacrylate are polymerized after light exposure, forming additional crosslinking points. As a result, the glass transition temperature of the material increases. Herein, digital photo-masking technique is applied for the photocuring process via a commercial projector. The regional exposure time of the material can be conducted, and thus, the local glass transition temperature can be controlled in a range of approximately 40 - 70 degrees C. Storage modulus at the rubbery state of the material increases from approximately 0.5 MPa to 8 MPa after photo exposure for 240 s, implying that there is a remarkable increase of the crosslinking density via the secondary photocuring. Both the materials before and after the secondary photocuring provide ideal shape memory performance. The shape fixity ratios and shape recovery ratios retain nearly 100% during six shape memory cycles, indicating good thermo-mechanical stability of the material. The material with regional controllable glass transition temperature enables a programmable multi-shape recovery process. Complex original shapes can be fabricated if the secondary photocuring is conducted towards a thermally cured epoxy. In addition, the material can be potentially applied as a novel substrate for stretchable electronics due to its strain isolation functionality.
Recent Advances in Polymer Shape Memory

Tao Xie

DOI: https://doi.org/10.1016/j.polymer.2011.08.003

IF: 4.6

2011-01-01

Polymer

Abstract:Traditional shape memory polymers (SMPs) are those capable of memorizing a temporary shape and recovering to the permanent shape upon heating. Although such a basic concept has been known for half a century, recent progresses have challenged the conventional understanding of the polymer shape memory effect and significantly expanded the practical potential of SMPs. In this article, notable recent advances in the field of SMPs are highlighted. Particular emphasis is placed on how the new developments have changed the conventional view of SMPs, what they mean for practical applications, and where the future opportunities are.
A Metallosupramolecular Shape‐Memory Polymer with Gradient Thermal Plasticity

Lipeng Yang,Guogao Zhang,Ning Zheng,Qian Zhao,Tao Xie

DOI: https://doi.org/10.1002/anie.201706949

2017-01-01

Angewandte Chemie International Edition

Abstract:Solid-state plasticity by dynamic covalent bond exchange in a shape-memory polymer network bestows a permanent shape reconfiguration ability. Spatio-selective control of thermally induced plasticity may further extend the capabilities of materials into unexplored domains. However, this is difficult to achieve because of the lack of spatio-control in typical polymer network synthesis. Metal-ligand interactions possess the high strength of covalent bonds while maintaining the dynamic reversibility of supramolecular bonds. Metallosupramolecular shape-memory polymer networks were designed and prepared, which demonstrated solid-state plasticity. The metallo-coordination bonds within these networks permit facile tuning of the plasticity behavior across a wide temperature range, simply by changing the metal ion. By controlling the diffusion of two different metal ions during preparation of a polymer film, a plasticity behavior with a spatial gradient was achieved, providing a unique shape-morphing versatility with potential in shape-memory devices.
Healable, Reconfigurable, Reprocessable Thermoset Shape Memory Polymer with Highly Tunable Topological Rearrangement Kinetics

Zizheng Fang,Ning Zheng,Qian Zhao,Tao Xie

DOI: https://doi.org/10.1021/acsami.7b05713

IF: 9.5

2017-01-01

ACS Applied Materials & Interfaces

Abstract:The unique capability of topological rearrangement for dynamic covalent polymer networks has enabled various unusual properties (self-healing, solid-state plasticity, and reprocessability) that are not found in conventional thermosets. Achieving these properties in one network in a synergetic fashion can open up new opportunities for shape memory polymer. To accomplish such a goal, the freedom to tune topological rearrangement kinetics is critical. This is, however, challenging to achieve. In this work, two sets of dynamic bonds (urethane and hindered urea) are incorporated into a hybrid network for synthesizing shape memory poly(urea-urethane). By changing the bond ratio, networks with highly tunable topological rearrangement kinetics are obtained. Combining self-healing, solid-state plasticity, and reprocessability in one such shape memory network leads to unusual versatility in its shape-shifting performance.
Thermoset Shape‐Memory Polyurethane with Intrinsic Plasticity Enabled by Transcarbamoylation

Ning Zheng,Zizheng Fang,Weike Zou,Qian Zhao,Tao Xie

DOI: https://doi.org/10.1002/anie.201602847

2016-01-01

Angewandte Chemie

Abstract:Thermoset polymers are known for their superior thermomechanical properties, but the chemical crosslinking typically leads to intractability. This is reflected in the great differences between thermoset and thermoplastic shape-memory polymers; the former exhibit a robust shape memory but are not capable of redefining the permanent shape. Contrary to current knowledge, we reveal here that a classical thermoset shape-memory polyurethane is readily capable of permanent reshaping (plasticity) after a topological network rearrangement that is induced by transcarbamoylation. By employing the Jianzhi technique (also known as kirigami), unexpected shape-shifting versatility was observed for this otherwise classical material. As the essential carbamate moiety in polyurethanes is one of the most common polymer building units, we anticipate that our finding will have significant benefits beyond shape shifting.
Tunable Polymer Multi-Shape Memory Effect

Tao Xie

DOI: https://doi.org/10.1038/nature08863

IF: 64.8

2010-01-01

Nature

Abstract:Getting back into shape Shape memory polymers have been known for at least half a century. When deformed at a temperature defined by a specific phase transition, these materials retain the new shape on cooling, but regain their original shape on reheating. Currently known shape memory polymers are capable of memorizing one or two temporary shapes, and the starting shape. Now Tao Xie, working at the General Motors Research and Development Center in Warren, Michigan, reports a material that has at least a quadruple shape memory effect — that's three 'new' shapes plus the original. The material is perfluorosulphonic acid (PFSA or Nafion), a commercial ionomer that has been extensively studied due to its application as a fuel-cell proton exchange membrane. Its broad reversible phase transition means that the shape memory effect is highly tunable, without the need for chemical alteration.
Significant Impact of Thermo-Mechanical Conditions on Polymer Triple-Shape Memory Effect

Junjun Li,Tao Xie

DOI: https://doi.org/10.1021/ma102279y

IF: 5.5

2010-01-01

Macromolecules

Abstract:A polymer triple-shape memory effect represents one of the most recent discoveries in the rapidly expanding field of shape memory polymers. It refers to the capability of a polymer to memorize two temporary shapes and subsequently recover them, all in one shape memory cycle. Although several examples of triple-shape polymers had been reported in the literature, they were notably evaluated under very different thermo-mechanical conditions. In this study, the effect of various thermo-mechanical conditions on the polymer triple-shape properties was investigated using Nafion as a model material. The choice of the programming and recovery heating methods in constructing triple-shape cycles was found to have a profound impact on the triple-shape properties. As such, the results of this study provided useful reference for future development of triple-shape polymers.
3D printed epoxy/acrylate hybrid polymers with excellent mechanical and shape memory properties via UV and thermal cationic dual-curing mechanism

Lingyu Zhao,Ran Yu,Yangyang He,Manwen Zhang,Feng Tian,Lei Wang,Yulei Zhao,Wei Huang

DOI: https://doi.org/10.1016/j.addma.2023.103904

IF: 11

2023-12-04

Additive Manufacturing

Abstract:Fabricating shape memory polymers with complex configurations and high mechanical performance for application as structural materials remains a significant challenge. Here, an epoxy/acrylate hybrid material with remarkable mechanical properties and excellent shape memory performance is fabricated using vat photopolymerization printing technology through photo-thermal dual curing mechanism. The UV-curing component comprises of a polyurethane acrylate and a rigid active diluent to ensure robustness and toughness. Meanwhile, the thermal curing epoxy constituent utilizes a benzylanilinium salt as the cationic initiator for its storage and handling stability throughout the UV curing stage. The interpenetrating polymer network and the unique two-phase molecular microstructure impart the hybrid material with good shape memory and high mechanical properties. Many complex objects are fabricated using vat photopolymerization printing technology and employed in self-deploying antennas, intelligent mechanical grippers, and switches. Combining with excellent printability, mechanical and shape memory properties, the hybrid materials have great potential applications in various fields.

engineering, manufacturing,materials science, multidisciplinary
Thermoset shape memory polymers and their composites

Fang Xie,Longnan Huang,Jinsong Leng,Yanju Liu

DOI: https://doi.org/10.1177/1045389x16634211

IF: 2.7

2016-07-28

Journal of Intelligent Material Systems and Structures

Abstract:This article reviews the main progress in the development of typical thermoset shape memory polymers. Thermoset polymers are usually stronger in their microstructure than thermoplastic polymers due to their covalently crosslinked three-dimensional networks. The virtues of thermoset polymers make them great source materials for shape memory polymers. However, their three-dimensional networks endow thermoset shape memory polymers with not only high shape fixity rates and shape recovery rates but also low deformation abilities and brittleness. In the past decade, many breakthroughs have been made regarding thermoset shape memory polymers. Typical thermoset materials, such as epoxy resin, cyanate resin, thermoset polyurethane, polyimide, and polystyrene, have been studied as raw materials for shape memory polymers. Studies on thermoset shape memory polymers have been carried out to not only improve their fundamental properties (i.e. broadening of their operating temperatures and service environments and enhancing their thermal stabilities and mechanical properties) but also introduce functional performance properties (e.g. responsiveness to light, electricity, magnetism, and chemical stimuli). This article aims to present a brief review of the development of thermoset shape memory polymers, including the selection and preparation of materials, the improvement of properties, the functionalization of their composites, and their potential applications.

materials science, multidisciplinary
Multi-performance shape memory epoxy resins and their composites with narrow transition temperature range

Lan Luo,Fenghua Zhang,Jinsong Leng

DOI: https://doi.org/10.1016/j.compscitech.2021.108899

IF: 9.1

2021-09-01

Composites Science and Technology

Abstract:<p>Shape memory epoxy resins are one of the most widely used engineering smart polymers, which is mainly used in active deformation structures in aerospace, intelligent bionics, and other fields. A series of shape memory epoxy resins with a narrow glass transition temperature range, strong inter-segment forces and uniform cross-linked networks were designed and synthesized in this study. By adjusting the stoichiometric ratio and cross-linking density, the length of the chain segment was controlled uniformly. The glass transition temperature range reached 14-23°C, which improved the efficiency of shape memory action. In addition, the multi-amines crosslinking agents were used to adjust the distribution of the chain segment and achieve the effect of regulating the glass transition temperature (Tg). Moreover, the addition of epoxy-terminated liquid nitrile rubber (ETBN) composites enabled toughen of systems. The elongation at break could be increased by 4 times. Furthermore, Tg, modulus and strength of composites were improved by adding high-temperature latent hardener based on the ETBN toughening system combined with two-stage curing method. The composites with narrow transition temperature range were more suitable for shape fixation and recovery temperature with higher precision and closer spacing, which meet the higher requirements in aerospace field.</p>

materials science, composites
A general approach towards thermoplastic multishape-memory polymers via sequence structure design.

Yingwu Luo,Yunlong Guo,Xiang Gao,Bo-Geng Li,Tao Xie

DOI: https://doi.org/10.1002/adma.201202884

IF: 29.4

2013-01-01

Advanced Materials

Abstract:The chain sequence of a poly(styrene-co-methyl acrylate) copolymer is designed to form a V-shaped gradient sequence via controlled/living radical emulsion copolymerization. This specially designed chain sequence gives this common copolymer the capacity of multishape memory. The copolymer can sequentially recover to its permanent shape from three or more previously programmed temporary shapes with the stimulus of temperature.
A New Shape Memory Epoxy Resin with Excellent Comprehensive Properties

Xiao Wu,Xin Yang,Ying Zhang,Wei Huang

DOI: https://doi.org/10.1007/s10853-015-9634-4

IF: 4.5

2016-01-01

Journal of Materials Science

Abstract:In this article, a new type of epoxy resin, diglycidyl ether of 9,9-bis [4-(2-hydroxyethoxy) phenyl] fluorine (DGEBEF) was successfully synthesized and characterized by 1H-NMR, FTIR, and FDMS analyses. The kinetics of DGEBEF cured with 4,4′-diamino diphenyl sulfone (DDS) was investigated by nonisothermal differential scanning calorimetry and thermal stability of the cured resin was characterized by thermogravimetric analysis. The DGEBEF/DDS system exhibits excellent processability, mechanical strength, and toughness, high thermal stability and low water absorption. Glass transition temperature (T g) of the cured epoxy was 170 °C determined by DMA. The ratio of the storage modulus of the cured resin at glassy state to that at rubbery state was as large as about 400, indicating its potential applications as shape memory material. The excellent shape memory properties were confirmed by fold-deploy shape memory and tensile-shrinkage tests. The shape fixed ratio was 99 %. and the shape recovery ratio was nearly 100 % after 30-s recovery at 185 °C in the fold-deploy shape memory test. In the tensile-shrinkage test, the recovery stress is 2.5 MPa at the strain of 25 % and temperature of 185 °C, and both the shape fixed and shape recovery ratios maintained at about 99 % after six test cycles.
Three-Dimensional Printing of Shape Memory Composites with Epoxy-Acrylate Hybrid Photopolymer.

Ran Yu,Xin Yang,Ying Zhang,Xiaojuan Zhao,Xiao Wu,Tingting Zhao,Yulei Zhao,Wei Huang

DOI: https://doi.org/10.1021/acsami.6b13531

IF: 9.5

2016-01-01

ACS Applied Materials & Interfaces

Abstract:Four-dimensional printing, a new process to fabricate active materials through three-dimensional (3D) printing developed by MIT's Self-Assembly Lab in 2014, has attracted more and more research and development interests recently. In this paper, a type of epoxy-acrylate hybrid photopolymer was synthesized and applied to fabricate shape memory polymers through a stereolithography 3D printing technique. The glass-to-rubbery modulus ratio of the printed sample determined by dynamic mechanical analysis is as high as 600, indicating that it may possess good shape memory properties. Fold-deploy and shape memory cycle tests were applied to evaluate its shape memory performance. The shape fixity ratio and the shape recovery ratio in ten cycles of fold-deploy tests are about 99 and 100%, respectively. The shape recovery process takes less than 20 s, indicating its rapid shape recovery rate. The shape fixity ratio and shape recovery ratio during 18 consecutive shape memory cycles are 97.44 ± 0.08 and 100.02 ± 0.05%, respectively, showing that the printed sample has high shape fixity ratio, shape recovery ratio, and excellent cycling stability. A tensile test at 62 °C demonstrates that the printed samples combine a relatively large break strain of 38% with a large recovery stress of 4.7 MPa. Besides, mechanical and thermal stability tests prove that the printed sample has good thermal stability and mechanical properties, including high strength and good toughness.

High Strain Epoxy Shape Memory Polymer

Thermadapt Shape Memory Polymer

Shape Memory Epoxy: a Systematic Study of Their Performance

Shape Memory Epoxy: Composition, Structure, Properties and Shape Memory Performances

One-way Shape Memory Behavior of Thermoplastic Polyolefin Elastomers

Relationship Between Materials Properties and Shape Memory Behavior in Epoxy-Amine Polymers

Shape Memory Polymer Network with Thermally Distinct Elasticity and Plasticity

A Molecular Dynamics Investigation of the Deformation Mechanism and Shape Memory Effect of Epoxy Shape Memory Polymers

Shape Memory Polymers with Regionally Defined Glass Transition Temperature via Digital Photocuring

Recent Advances in Polymer Shape Memory

A Metallosupramolecular Shape‐Memory Polymer with Gradient Thermal Plasticity

Healable, Reconfigurable, Reprocessable Thermoset Shape Memory Polymer with Highly Tunable Topological Rearrangement Kinetics

Thermoset Shape‐Memory Polyurethane with Intrinsic Plasticity Enabled by Transcarbamoylation

Tunable Polymer Multi-Shape Memory Effect

Significant Impact of Thermo-Mechanical Conditions on Polymer Triple-Shape Memory Effect

3D printed epoxy/acrylate hybrid polymers with excellent mechanical and shape memory properties via UV and thermal cationic dual-curing mechanism

Thermoset shape memory polymers and their composites

Multi-performance shape memory epoxy resins and their composites with narrow transition temperature range

A general approach towards thermoplastic multishape-memory polymers via sequence structure design.

A New Shape Memory Epoxy Resin with Excellent Comprehensive Properties

Three-Dimensional Printing of Shape Memory Composites with Epoxy-Acrylate Hybrid Photopolymer.