Abstract:Three types of all-fiber mode-selection couplers based on fused few-mode fibers (FMFs) are proposed and demonstrated. The specific mode conversions are achieved with appropriate parameters, keeping to the coupling mode theory. LP01 mode is selectively converted into the LP11, LP21, LP02 mode via a 2×2 fused fiber coupler composed of single-mode fiber (SMF) and FMF. By changing the preset parameters in fabrication, mode conversions are also realized between the LP01 and the mixed high order modes. Moreover, conversions from the LP01 mode to other higher order modes are implemented as well in a 3×3 fiber coupler comprising FMF-SMF-FMF structures. Besides, different modes are simultaneously obtained in separated channels to reduce model crosstalk. Distinguished from other techniques, symmetric and asymmetric fused biconical taper are employed in this paper. The 2×2 fiber coupler achieves the conversion from LP01 mode to a single higher order mode such as LP11 or LP21 mode over a broadband spectral range from 1530 nm to 1560 nm. Meanwhile, the mode conversion efficiency exceeding 80% is recorded in experiment, while the insertion loss remains as low as 0.8 dB. Through the comparison with all-fiber mode-selection couplers reported, the relationship between fusion-degree and conversion efficiency is further studied. The experimental results are consistent with the numerical simulations. In addition, the coupler based mode-selection with lower insertion loss and higher conversion efficiency shows potential applications in mode-division multiplexing and sensing systems.

Theoretical Study of Mode Evolution Properties in a 3×1 Adiabatic Tapered Single-Mode Fiber Combiner

Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

Design and Numerical Optimization of A Mode Multiplexer Based on Few-Mode Fiber Couplers

An Multi-to-single Mode Conversion Experiment Using the Tapered Fiber

Theoretical study of mode evolution in active long tapered multimode fiber.

Optical Fiber Index Taper–Theoretical Analysis and Experiment Demonstration

Numerical Study on the Propagation Property of a Single Mode Fiber Beam Combiner

Theoretical investigation of core mode cut-off condition for tapered multicore fiber

Novel fiber taper for efficient optical interconnection

Research of Three Mode Fiber Multiplexers and Demultiplexers

Numerical Study of 3 × 1 SM-MM Fiber Combiner Propagation Properties with Finite Cladding

Study of mode propagation with 632.8-nm laser in tapered fiber

Numerical and Simulation Analyses on Supermode Characteristics of Dual-Core Fiber and Four-Core Fiber

Temperature and Refractive Index-Independent Mode Converter Based on Tapered Hole-Assisted Dual-Core Fiber

Numerical Analysis of Fiber Coupler for Supercontinuum

Design and Experimental Study of Mode Selective All-Fiber Fused Mode Coupler Based on Few Mode Fiber

Study of Single-mode Fused Biconical Optical Coupler Based on Strong Coupled-mode Theory

Fundamental Mode Characteristics in Tapered Photonic Crystal Fiber

Experimental Study on Fused Tapered Optical Fibre Coupler

Mode Transmission Analysis of Tapered Fiber Based on Coupled Local Mode Theory

The Intrinsic Mode Activation and Evolution in Fiber Splicing Based on 3D Refractive Index Profile Characterization