Abstract:The U. S. Environmental Protection Agency in collaboration with the U. S. Air Force Arnold Engineering Development Complex conducted the VAriable Response In Aircraft nvPM Testing (VARIAnT) 3 and 4 test campaigns to compare nonvolatile particulate matter (nvPM) emissions measurements from a variety of diffusion flame combustion aerosol sources (DFCASs), including a Cummins diesel engine, a diesel powered generator, two gas turbine start carts, a J85-GE-5 turbojet engine burning multiple fuels, and a Mini-CAST soot generator. The VARIAnT research program was devised to understand reported variability in the ARP6320A sampling system nvPM measurements. The VARIAnT research program has conducted four test campaigns to date with the VARIAnT 3 and 4 campaigns devoted to: (1) assessing the response of three different black carbon mass analyzers to particles of different size, morphology, and chemical composition; (2) characterizing the particles generated by 6 different combustion sources according to morphology, effective density, and chemical composition; and (3) assessing any significant difference between black carbon as determined by the 3 mass analyzers and the total PM determined via other techniques. Results from VARIAnT 3 and 4 campaigns revealed agreement of about 20% between the Micro-Soot Sensor, the Cavity Attenuated Phase Shift (CAPS PMSSA) monitor and the thermal-optical reference method for elemental carbon (EC) mass, independent of the calibration source used. For the LII-300, the measured mass concentrations in VARIAnT 3 fall within 18% and in VARIAnT 4 fall within 27% of the reference EC mass concentration when calibrated on a combustor rig in VARIAnT 3 and on an LGT-60 start cart in VARIAnT 4, respectively. It was also found that the three mass instrument types (MSS, CAPS PMSSA, and LII-300) can exhibit different BC to reference EC ratios depending on the emission source that appear to correlate to particle geometric mean mobility diameter, morphology, or some other parameter associated with particle geometric mean diameter (GMD) with the LII-300 showing a slightly stronger apparent trend with GMD. Systematic differences in LII-300 measured mass concentrations have been reduced by calibrating with a turbine combustion as a particle source (combustor or turbine engine). With respect to the particle size measurements, the sizing instruments (TSI SMPS, TSI EEPS, and Cambustion DMS 500) were found to be in general agreement in terms of size distributions and concentrations with some exceptions. Gravimetric measurements of the total aerosol mass produced by the various DFCAs differed from the reference EC, BC and integrated particle size distribution measured aerosol masses. The measurements of particle size distributions and single particle analysis performed using the miniSPLAT indicated the presence of larger particles (≳150 nm) having more compact morphologies, higher effective density, and a composition dominated by OC and containing ash. This increased large particle fraction is also associated with higher values of single scattering albedo measured by the CAPS PMSSA instrument and higher OC measurements. These measurements indicate gas turbine engine emissions can be a more heterogeneous mix of particle types beyond the original E-31 assumption that engine exit exhaust particles are mainly composed of black carbon.

PM10Standards and Nontraditional Particulate Source Controls: A Summary of the A&WMA/EPA International Specialty Conference

RECEPTOR MODELS IN AIR RESOURCES MANAGEMENT - A SUMMARY OF THE APCA INTERNATIONAL SPECIALTY CONFERENCE

The A&WMA 2010 Critical Review -- Multipollutant Air Quality Management

Overview of the Special Issue "PM2.5 in Asia" for 2015 Asian Aerosol Conference

Advances in Integrated and Continuous Measurements for Particle Mass and Chemical Composition

A Special Issue from the NARSTO Symposium on Tropospheric Aerosols

Investigation on Removal Effects and Condensation Characteristics of Condensable Particulate Matter: Field Test and Experimental Study.

Welcome to a Special Issue on PM25: A Fine Particle Standard

State-of-the-Art and Recent Advances in the Abatement of Gaseous Pollutants from Waste-to-Energy

A Typical 300 MW Ultralow Emission Coal-Fired Power Plant: Source, Distribution, Emission, and Control of Polycyclic Aromatic Hydrocarbons

Introduction to the A&WMA 2004 Critical Review Megacities and Atmospheric Pollution

Evaluation of methods for characterizing the fine particulate matter emissions from aircraft and other diffusion flame combustion aerosol sources

Measurement system evaluation for upwind/downwind sampling of fugitive dust emissions

Review on Recent Progress in Observations, Source Identifications and Countermeasures of PM2.5.

Evolution of PM2.5 Measurements and Standards in the U.S. and Future Perspectives for China

New And Emerging Technologies: Impact On Air Quality And Climate 3rd Vdi/Dechema/Gdch Expert Forum On Atmospheric Chemistry (Efac 3)

PM<sub>2.5</sub> chemical composition and spatiotemporal variability during the California Regional PM<sub>10</sub>/PM<sub>2.5</sub> Air Quality Study (CRPAQS)

An Overview of Pcdd/F Inventories and Emission Factors from Stationary and Mobile Sources: What We Know and What is Missing

Workgroup report: workshop on source apportionment of particulate matter health effects--intercomparison of results and implications

Technologies for air pollution control

Diesel Engines: Environmental Impact and Control