Abstract:Lithium-ion batteries are widely used today in powering devices from portable electronics to electric vehicles. Despite their great success, this battery chemistry relies on organic solvent-based liquid electrolytes which are highly flammable, leading to major safety concerns. In contrast, solid-state batteries, which are based on solid-state electrolytes, are regarded to have much better safety characteristics and potentially higher energy density than the conventional lithium-ion batteries. Solid-state electrolytes usually include ceramics, polymers, gels, and composites. Among them, polymer materials have attracted considerable attention due to their great interfacial contact, flexibility, and easy fabrication. In particular, polyvinylidene fluoride (PVDF) polymer electrolyte is a promising candidate as it can potentially provide a high voltage window and enable high energy density solid-state batteries. However, the current PVDF-based polymer electrolyte is still not compatible with high voltage cathodes, such as layered lithium transition metal oxides and the interaction between the salt and PVDF polymer has not been fully elucidated. We have systematically studied the PVDF-based electrolytes with different salts and salt combinations, including lithium bis(fluorosulfonyl)imide (LiFSI), lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and lithium bis(pentafluoroethanesulfonyl)imide (LiBETI). The optimized electrolyte delivers excellent performance for solid-state Li||LiFePO 4 cells, achieving a specific capacity of over 150 mAh/g and lasting more than 50 cycles with over 99% capacity retention. Similar tests have also been applied to lithium nickel manganese cobalt oxides (NMC), and the preliminary results show promising cycling stability and capacity retention. In addition to electrochemical study, we employed a range of synchrotron-based X-ray techniques, including diffraction, pair distribution function analysis, and absorption spectroscopy, to investigate the interactions between the polymer and lithium salt in the polymer electrolytes. This knowledge will provide valuable information for designing new polymer electrolyte systems. Acknowledgments: The work at Brookhaven National Laboratory was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Vehicle Technology Office of the U.S. Department of Energy through the Advanced Battery Materials Research (BMR) Program under contract DE-SC0012704. This research used beamline 23-ID-2 and 28-ID-2 of the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-SC0012704.

Safety‐Reinforced Poly(Propylene Carbonate)‐Based All‐Solid‐State Polymer Electrolyte for Ambient‐Temperature Solid Polymer Lithium Batteries

A Polymer-in-Salt Electrolyte Enables Room Temperature Lithium Metal Batteries

In Situ Solidified Gel Polymer Electrolytes for Stable Solid−State Lithium Batteries at High Temperatures

High‐Performance Pure Polymer Electrolytes with Enhanced Ionic Conductivity for Room‐Temperature Applications

A poly(1,3-dioxolane) based deep-eutectic polymer electrolyte for high performance ambient polymer lithium battery

Study of Room Temperature Solid Polymer Electrolyte for Lithium Sulfur Battery

Li‐Ion Transfer Mechanism of Ambient‐Temperature Solid Polymer Electrolyte toward Lithium Metal Battery

Room-Temperature Performance of Poly(Ethylene Ether Carbonate)-Based Solid Polymer Electrolytes for All-Solid-State Lithium Batteries

Ultrathin, flexible, solid polymer composite electrolyte enabled with aligned nanoporous host for lithium batteries

In Situ Fabrication of Solvent-Free Solid Polymer Electrolytes for Wide-Temperature All-Solid-State Lithium Metal Batteries

Nanophase separated, grafted alternate copolymer styrene-maleic anhydride as an efficient room temperature solid state lithium ion conductor

Localized High Concentration Polymer Electrolyte Enabling Room Temperature Solid-State Lithium Metal Batteries with Stable LiF-rich Interphases

Non-flammable solvent-free liquid polymer electrolyte for lithium metal batteries

Progress of Polymer Electrolytes Worked in Solid‐State Lithium Batteries for Wide‐Temperature Application

Flexible Organic–Inorganic Composite Solid Electrolyte with Asymmetric Structure for Room Temperature Solid-State Li-Ion Batteries

A Chitosan/Poly(ethylene Oxide)‐based Hybrid Polymer Composite Electrolyte Suitable for Solid‐State Lithium Metal Batteries

Hybrid lithium salts regulated solid polymer electrolyte for high-temperature lithium metal battery

Electrochemical and Structural Study on PVDF-Based Polymer Electrolytes for Solid-State Batteries

Solid‐state Single‐ion Conducting Comb‐like Siloxane Copolymer Electrolyte with Improved Conductivity and Electrochemical Window for Lithium Batteries

Deep Eutectic Solvent‐Based Solid Polymer Electrolytes for High‐Voltage and High‐Safety Lithium Metal Batteries

Superior Blends Solid Polymer Electrolyte with Integrated Hierarchical Architectures for All-Solid-State Lithium-Ion Batteries