Low-loss Pilot-Beam Delivery in Hollow Optical Fiber for High-Energy Infrared Laser Light

YW Shi,K Ito,Y Matsuura,M Miyagi

DOI: https://doi.org/10.1117/12.573469

2005-01-01

Abstract:New techniques were established in fabricating cyclic olefin polymer-coated silver (COP/Ag) hollow optical fiber. Low-loss properties in visible region were obtained owing to the smoother layers of silver and polymer. In silver layer plating, a SnCl2 solution pre-treatment was used to sensitize the inner surface of the glass capillary. A silver layer with an RMS surface roughness of 8 nm was obtained comparing with 18 nm RMS roughness without the pre-treatment. In the liquid-phase coating of the polymer layer, an ambient air of organic solvent was used in the whole process. A smoother polymer layer with RMS roughness of 10 nm was obtained comparing with 20 nm roughness when a normal nitrogen gas-flow was used. The straight and bending loss properties for the hollow fibers have been measured by using a CO2 laser and a red laser diode at the wavelengths of 10.6 mum and 0.63 mum. The straight losses were 0.4 dB and 1 dB for the hollow fiber (700 mumphi X 1 m) made by the new developed fabrication techniques.