Abstract:Intra-body communication (IBC) will foster personalized medicine by enabling interconnection of implanted devices. Communication takes place through energy-efficient technologies such as capacitive coupling (CC) and galvanic coupling (GC); however, their modeling is still incomplete. This paper tackles characterization of the human body channel using impulse response, including a first-ever comparison of CC and GC in both wearable and implantable configurations. Experimental data are leveraged to evaluate the measured impulse response in ex-vivo chicken tissue and in-vivo human tissue in a frequency range up to 100 kHz. Pseudorandom noise (PN) sequences are transmitted in baseband and a correlative channel sounding system is implemented. Experimental results demonstrate that the channel is relatively flat in the frequency range of interest, thus offering the opportunity to simplify the design of an IBC transceiver. The relationship between the channel responses and the transmitter-to-receiver distance is also examined using linear correlation, and two regression models are developed. The results show that CC channels are not affected by distance within the range of investigation, while a negative relationship is found for GC channels. Finally, experiments reveal that implantable CC with isolated ground -not deeply investigated yet- is a very promising solution for IBC.

Channel Modeling and Simulation for Galvanic Coupling Intra-body Communication

The Modeling and Simulation of the Galvanic Coupling Intra-Body Communication Via Handshake Channel

Review of the Modeling, Simulation and Implement of Intra-body Communication

The Simulation Of Electrostatic Coupling Intra-Body Communication Based On Finite-Element Models

Study on Signal Transmission Mechanism and Characteristic of Human Body Communication

A Finite-Element Simulation Of Galvanic Coupling Intra-Body Communication Based On The Whole Human Body

Modeling and Characterization of the Electrostatic Coupling Intra-Body Communication Based on Mach-Zehnder Electro-Optical Modulation.

Study on the Mathematical Simulation of Galvanic Coupling IBC with Different Signal Transmission Paths

Mathematical simulations of the galvanic coupling intra-body communication by using the transfer function method

Channel Characterization of Implantable Intrabody Communication through Experimental Measurements

The Simulation Method of the Galvanic Coupling Intrabody Communication with Different Signal Transmission Paths

Model and Channel Characteristics of Near Field Inter-Body Coupling Communication

The Finite-Element Simulation of the Intra-Body Communication Used in Wireless Body Area Networks

Analysis of Wave Propagation on Human Body Based on Stratified Media Model

Channel Modeling for Physically Secure Electro-Quasistatic In-Body to Out-of-Body Communication with Galvanic Tx and Multimodal Rx

The Theoretical Analysis and FE Simulation of Electrostatic Coupling Intra-Body Communication Based on Upper Arm Model

Experimental Channel Characterization of Human Body Communication Based on Measured Impulse Response

A Modeling Method of the IBC System Based on the Composite Fading Channel

The Sensitivity Characteristics of the Electrostatic Coupling Intra-Body Communication Based on the Mach-Zehnder Electro-Optic Modulation

The Modeling of the Whole Human Body and the Simulations of the Waveguide Intra-Body Communication by Using the Finite-Element Method

Modeling and characterization of the implant intra-body communication based on capacitive coupling using a transfer function method.