Abstract:Objective. With the strong drive towards miniaturization of active implantable medical devices and the need to improve the resolution of neural stimulation arrays, there is keen interest in the manufacture of small electrodes capable of safe, continuous stimulation. Traditional materials such as platinum do not possess the necessary electrochemical properties to stimulate neurons safely when electrodes are very small (i.e. typically less than about 300 µm (78 400 µm2)). While there are several commercially viable alternative electrode materials such as titanium nitride and iridium oxide, an attractive approach is modification of existing Pt arrays via a high electrochemical capacitance material coating. Such a composite electrode could still take advantage of the wide range of fabrication techniques used to make platinum-based devices. The coating, however, must be biocompatible, exhibit good adhesion and ideally be long lasting when implanted in the body. Approach. Platinum foils were roughened to various degrees with regular arrays of laser milled pits. Conducting diamond films were grown on the foils by microwave plasma chemical vapor deposition. The adhesion strength of the films to the platinum was assessed by prolonged sonication and accelerated aging. Electrochemical properties were evaluated and compared to previous work. Main results. In line with previous results, diamond coatings increased the charge injection capacity of the platinum foil by more than 300% after functionalization within an oxygen plasma. Roughening of the underlying platinum substrate by laser milling was required to generate strong adhesion between the diamond and the Pt foil. Electrical stress testing, near the limits of safe operation, showed that the diamond films were more electrochemically stable than platinum controls. Significance. The article describes a new method to protect platinum electrodes from degradation in vivo. A 300% increase in charge injection means that device designers can safely employ diamond coated platinum stimulation electrodes at much smaller sizes and greater density than is possible for platinum.

Fabrication of Strongly Adherent Platinum Black Coatings on Microelectrodes Array

Knowing your allies: Medical education and interprofessional exposure

A Comparative Study on the Effect of Substrate Structure on Electrochemical Performance and Stability of Electrodeposited Platinum and Iridium Oxide Coatings for Neural Electrodes

Platinum‐Iridium Alloy Nanoparticle Coatings Produced by Electrophoretic Deposition Reduce Impedance in 3D Neural Electrodes

Surface Modification to Improve the Electrochemical Performance of Neural Microelectrode Arrays

Electrostatic Interaction-Based High Tissue Adhesive, Stretchable Microelectrode Arrays for the Electrophysiological Interface

Electrically conducting diamond films grown on platinum foil for neural stimulation

Iridium Oxide-Platinum Nanocomposite Coating for Neural Electrode

Electrophoretic Deposition of Platinum Nanoparticles using Ethanol-Water Mixtures Significantly Reduces Neural Electrode Impedance

Research Update: Platinum-elastomer mesocomposite as neural electrode coating

Monolithic and Scalable Au Nanorod Substrates Improve PEDOT–Metal Adhesion and Stability in Neural Electrodes

In Vivo Electrochemical Analysis of a PEDOT/MWCNT Neural Electrode Coating

Au24Cd Nanoenzyme Coating for Enhancing Electrochemical Sensing Performance of Metal Wire Microelectrodes

Inexpensive color evaluation of dye-based pressure-sensitive films for plantar studies.

Fabrication, Characterization, and Analytical Application of Silica Nanopore Array-Modified Platinum Electrode.

Fabrication of High-Performance Neural Stimulation Electrode through Pulsed Electrochemical Deposition of IrOx onto Nano-Porous Platinum

Fabrication and Characterization of a Parylene-Based Three-Dimensional Microelectrode Array for Use in Retinal Prosthesis

A Gold Microarray Electrode on A Poly(Methylmethacrylate) Substrate to Improve the Performance of Microbial Fuel Cells by Modifying Biofilm Formation

Enhancing Flexible Neural Probe Performance via Platinum Deposition: Impedance Stability under Various Conditions and In Vivo Neural Signal Monitoring

High-Performance MEA Prepared by Direct Deposition of Platinum on the Gas Diffusion Layer Using an Atomic Layer Deposition Technique

Electrochemical and biological characterization of thin-film platinum-iridium alloy electrode coatings: a chronic in vivo study