Theoretical and Experimental Investigation of a Closed Sorption Thermal Storage Prototype Using LiCl/water

N. Yu,R. Z. Wang,L. W. Wang

DOI: https://doi.org/10.1016/j.energy.2015.10.001

IF: 9

2015-01-01

Energy

Abstract:A 1 kWh lab-scale sorption prototype using LiCl-water was theoretically and experimentally investigated for sorption thermal energy storage. A type of consolidated composite matrix is developed for the system by using AC (activated carbon), LiCl, expanded natural graphite treated with sulphuric acid (ENG-TSA) to increase heat transfer and SS (silica solution) to enhance mechanical strength. Thermal conductivity and permeability were measured first. A two-dimensional model considering the combined heat and mass transfer was developed to predict the sorption kinetics of the reactor. Under the operation condition of a charging temperature of 85 degrees C and a discharging temperature of 40 degrees C, the experimentally recovered heat is 2517 kJ, resulting a heat storage efficiency of 93%. The heat storage density is 874 kJ/kg consolidated sorbent or 2622 kJ/kg LiCl. The experimental results of the prototype were compared with the simulated results. The established two-dimensional model proves to be effective since the general evolution trends of experimental and simulated outlet fluid temperatures are in good agreement. An average gap of about 0.4 degrees C between the experimental and simulated outlet temperature may be caused by the heat loss and the constant pressure assumption. (C) 2015 Elsevier Ltd. All rights reserved.