Degradation of P-Nitrophenol Using CuO/Al2O3 As a Fenton-like Catalyst under Microwave Irradiation

Weiqian Pan,Guangshan Zhang,Tong Zheng,Peng Wang

DOI: https://doi.org/10.1039/c4ra14516j

IF: 4.036

2015-01-01

RSC Advances

Abstract:The CuO/Al2O3 was used as a heterogeneous catalyst for Fenton-like oxidation of PNP under microwave and the PNP removal was enhanced greatly by microwave.

What problem does this paper attempt to address?

Treatment of p-nitrophenol in water by Fenton-like reaction with microwave coupling

PAN Wei-qian,ZHANG Guang-shan,ZHENG Tong,ZHANG Jie,WANG Peng

2014-01-01

Abstract:In order to avoid the narrow pH range in the traditional Fenton process, the CuO catalyst was synthesized and used in the microwave-assisted Fenton-like process to remove the p-Nitrophenol (PNP), which is harmful to the environment and difficultly biodegradable. The effects of the H2O2 dosage, CuO dosage, microwave power, irradiation time, and initial pH on the degradation of PNP were investigated in detail. The optimal values of operating parameters were found at a H2O2 concentration of 0.06mol/L, a CuO concentration of 0.3g/L, a microwave power of 125W, and a pH of about 6without adjusting the initial pH. Under the optimal conditions, the removal efficient of PNP reached 92%and the TOC removal was 63%after 6min of irradiation when the initial concentration of PNP was 50mg/L. Compared with the other oxidation processes, the microwave can enhance the ·OH production from the Fenton-like process, resulting in the improved removal efficiency of PNP. As a new kind of Fenton-like process, the microwave-assisted one using the CuO catalyst can overcome the limitation of the narrow pH range in the traditional Fenton reaction, and broaden the application of the Fenton process in wastewater treatment.
Enhanced Conversion from H2O2 to 1O2 on Cu–N Centers: Investigation of Mechanisms and Application in Alkaline Wastewater Treatment

Jiahao Zhu,Jianqing Ma,Sijing Yao,Mika Erik Tapio Sillanpaa,Minghua Zhou,Chensi Shen,Qing Ye,Huixia Jin,Kefeng Zhang

DOI: https://doi.org/10.1016/j.seppur.2023.125666

IF: 8.6

2024-01-01

Separation and Purification Technology

Abstract:Heterogeneous Fenton-like systems using H2O2 as an oxidant have been extensively investigated in acidic and neutral conditions, but usually, they become ineffective under alkaline conditions. In this study, a cuprous graphitic carbon nitride material (Cu-CN) was prepared that can generate singlet oxygen (1O2) from H2O2. The results demonstrate that at pH 11, 95 % of 50 mg/L p-chlorophenol (4-CP) can be effectively eliminated within 120 min. Through semi-quantitative analysis and density functional theory calculations, it has been confirmed that 1O2 is the dominant reactive oxygen species in this system under alkaline conditions. The main pathway for 1O2 generation involves the formation of a complex between & sdot;O2- and Cu(II)-N sites, and the subsequent intra-molecular electron transfer. To enhance the stability and separation performance of this catalyst, polyethylene glycol (PEG) was employed as a binder to combine Cu-CN with Fe3O4. The terminal hydroxyl groups in PEG were cross-liked by metals, thus forming a solid and magnetic composite (CuFe@PEG). Compared to Cu-CN, CuFe@PEG exhibited remarkable performance with 93 % retention of its original capacity for 4-CP removal at pH 11. Furthermore, after seven cycles, the degradation efficiency only decreased by 6.36 %. This study introduces a novel approach for utilizing Fenton-like reactions in treating alkaline wastewater.
Catalytic Degradation of P-Nitrophenol by Magnetically Recoverable Fe3O4 As a Persulfate Activator under Microwave Irradiation.

Limin Hu,Peng Wang,Guoshuai Liu,Qingzhu Zheng,Guangshan Zhang

DOI: https://doi.org/10.1016/j.chemosphere.2019.124977

IF: 8.8

2020-01-01

Chemosphere

Abstract:In this study, Fe3O4 and microwave (MW) were combined to activate persulfate (PS) for the removal of organic matter, resulting in the enhanced degradation of p-nitrophenol (PNP) in solution. During the preparation of Fe3O4, the effect of sodium acetate was examined, and the results showed that the concentration of sodium acetate had little effect on the catalytic activity of the Fe3O4/PS/MW system but did have an effect on the Fe3O4 yield. In addition, with regards to the representative environmental factors, the degradation experiment showed that humic acid and the co-existing anions of chloride, sulfate, nitrate, and phosphate had little effects on p-nitrophenol removal; however, carbonate had a negative effect. In addition, the Fe3O4/PS/MW system performed well in the initial pH range of 3.0–9.0. According to the quenching experiment and electron paramagnetic resonance (EPR) detection, sulfate radicals and a minority of hydroxyl radicals play dominant roles in the degradation process. In addition, the role of Fe3O4 was confirmed to take part in the degradation process by X-ray photoelectron spectroscopy (XPS) analysis. Because of the good performance observed in the water matrices of tap water and the Songhua River, these results demonstrate the potential application of the Fe3O4/PS/MW system for wastewater treatment.
Facile and Rapid Microwave-Assisted Preparation of Cu/Fe-AO-PAN Fiber for PNP Degradation in a Photo-Fenton System under Visible Light Irradiation

Qiao Wang,Shuang Liang,Guangshan Zhang,Rongjun Su,Chunyan Yang,Peng Xu,Peng Wang

DOI: https://doi.org/10.1016/j.seppur.2018.07.037

IF: 8.6

2019-01-01

Separation and Purification Technology

Abstract:A visible-light responsive Cu-Fe bimetallic amidoxime-modified polyacrylonitrile (denoted by Cu/Fe-AO-PAN) fiber was prepared using a facile and rapid microwave-assisted synthesis method. Several microscopic and spectroscopic techniques were adopted to characterize the morphology, structure, thermal and optical properties of the Cu/Fe-AO-PAN fiber. The results indicated that Cu(2+ )and Fe3+ ions were successfully coordinated with AO-PAN without causing distinct damage to the fiber and that chelation with metal ions extended the light absorption into the visible-light region. P-nitrophenol (PNP) was used to investigate the photocatalytic performance of the Cu/Fe-AO-PAN fiber in a photo-Fenton system under visible light irradiation. Various parameters that affected PNP removal were discussed, including the microwave heating temperature, irradiation time, Cu/ Fe molar ratio, and photo-Fenton reaction conditions, such as the pH, H2O2 concentration and fiber dosage. Under the optimal conditions, a PNP removal rate of approximately 100% was achieved within 150 min under visible light irradiation. The bimetallic Cu/Fe-AO-PAN exhibited improved pH tolerance, photocatalytic performance and stability compared to the monometallic Fe-AO-PAN fiber. In addition, a mechanism for PNP degradation induced by the Cu/Fe-AO-PAN fiber in the photo-Fenton system under visible light irradiation was proposed.
Phenolic Wastewater Treatment by Microwave-Induced H2o2-Fe(Iii)-Cu(Ii)/Gamma-Al2o3 Catalytic Oxidation Process

Jie Zhang,Weiqian Pan,Tong Zheng,Peng Wang

DOI: https://doi.org/10.4028/www.scientific.net/amr.777.101

2013-01-01

Advanced Materials Research

Abstract:To achieve efficient removal of phenolic pollutants in water, the catalyst of Fe (III)-Cu (II)/γ-Al2O3 was prepared. In the presence of Fe (III)-Cu (II)/γ-Al2O3, microwave-induced hydrogen peroxide (H2O2) catalytic oxidation process was conducted for the treatment of synthetic wastewater containing PNP, a representative of phenolic pollutants. Effectiveness of the process and factors influencing PNP removal were investigated and results showed microwave-induced H2O2-Fe (III)-Cu (II)/γ-Al2O3 process could achieve 99.41% PNP removal percentage, corresponding to 77.9% TOC removal in a given condition. The process remained effective in the 2-8 pH range with high reusability of Fe (III)-Cu (II)/γ-Al2O3 catalyst. The kinetics study showed microwave-induced H2O2-Fe (III)-Cu (II)/γ-Al2O3 process could be divided into microwave induction stage and catalytic oxidation stage, both of which fitted first-order kinetics, with reaction rate constants of 0.0453 min-1 and 4.7552 min-1 respectively.
Pilot-scale Treatment of P-Nitrophenol Wastewater by Microwave-Enhanced Fenton Oxidation Process: Effects of System Parameters and Kinetics Study

Nannan Wang,Tong Zheng,Jiping Jiang,Wu-seng Lung,Xiaojun Miao,Peng Wang

DOI: https://doi.org/10.1016/j.cej.2013.11.038

IF: 15.1

2013-01-01

Chemical Engineering Journal

Abstract:A pilot-scale microwave-Fenton (MW-Fenton) process in a continuous flow microwave irradiation system was studied by the degradation of p-Nitrophenol (p-NP) in wastewater. The results showed that the amount of hydroxyl radicals (OH) in MW-Fenton process was 2.8 times higher than that in conventional Fenton process at 7min. The maximum p-NP removal efficiency (93.2%) was measured at pH 3.3 when nH2O2/np-NP was 13.9, nH2O2/nFe(II) was 81.6 and the hydraulic detention time was 12min by mixing p-NP and H2O2 solution firstly, and then adding Fe(II) solution. The energy efficiency in the pilot-scale process was estimated to be 75.5%, superior to our previous lab-scale treatment result (less than 70%). The process obeyed the pseudo first-order kinetics by assuming a constant concentration of OH·. The apparent activation energy of p-NP degradation, calculated by Arrhenius equation, was 44.89kJmol−1. The range of intrinsic reaction rate constants of p-NP degradation under optimal conditions in the continuous flow MW irradiation system was from 1.09×108Lmol−1s−1 to 2.63×108Lmol−1s−1. The pilot-scale study prompts the potential industrial application of MW-Fenton oxidation process in rapid and effective removal of refractory toxic organic pollutants from wastewater.
High efficiency degradation of 4-nitrophenol by microwave-enhanced catalytic method

Teh-Long Lai,Kim-Fui Yong,Jen-Wei Yu,Jung-Hui Chen,Youn-Yuen Shu,Chen-Bin Wang

DOI: https://doi.org/10.1016/j.jhazmat.2010.09.044

2011-01-15

Abstract:Application of the microwave-enhanced catalytic degradation (MECD) method on the abatement of 4-nitrophenol (4-NP) using nickel oxide was studied. A mix-valenced nickel oxide was prepared from nickel nitrate aqueous solution through a precipitation with sodium hydroxide and an oxidation by sodium hypochlorite with/without microwave-assisted heating. They were characterized by X-ray (XRD), infrared spectroscopy (IR), temperature programmed reduction (TPR), and transmission electron micrographs (TEM). Their catalytic activities towards the degradation of 4-NP were investigated through continuous bubbling of air during the liquid phase and evaluated quantitatively with high pressure liquid chromatography (HPLC). Also, the effect of the kinds of catalyst, temperature, pH, initial concentration, and dosage of catalyst on the efficiency of 4-NP degradation was investigated. The results showed that the 4-NP was completely degraded using the high efficiency MECD method within 15 min under [H(+)] = 1.0M, T = 40 °C, and C = 200 ppm over nickel oxide.
Enhanced Persulfate Oxidation of Organic Pollutants and Removal of Total Organic Carbons Using Natural Magnetite and Microwave Irradiation

Limin Hu,Peng Wang,Guangshan Zhang,Guoshuai Liu,Yang Li,Tianyao Shen,John C. Crittenden

DOI: https://doi.org/10.1016/j.cej.2019.123140

IF: 15.1

2020-01-01

Chemical Engineering Journal

Abstract:Natural magnetite (Fe3O4) and microwave (MW) irradiation were applied to activate persulfate (PS) for the degradation of p-nitrophenol (PNP) with superior activity. The characteristics of natural magnetite were systematically inspected and analyzed. The MW+ PS + Fe3O4 system showed a high degradation efficiency for PNP (94.2% within 28 min under the conditions of [PNP] = 20 mg.L-1, [Fe3O4]= 2.5 g.L-1, [PS]/[PNP]molar = 15/1, T = 80 degrees C), which was better than MW+ PS system at the same reaction temperature. With the help of quenching experiment and electron paramagnetic resonance (EPR), we found that of the generated radicals, SO4 center dot- was responsible for most the oxidation and center dot OH played a minor role. Regarding the effects of coexisting ions, the different ions exhibited different influence on degradation performance. Specifically, chloride ion showed an accelerating effect, whereas sulfate, phosphate and carbonate showed an inhibitory effect, and nitrate showed negligible effect for PNP decomposition performance. This unique ion effect was ascribed to the generation of ferrous-ligand complexes and the secondary radical reaction between the sulfate radicals and coexisting ions. Both metronidazole and sulfadiazine were also treated well in the present system. The practical and economic applicability of MW + PS + Fe3O4 system were discussed. All in all, our unique MW + PS + Fe3O4 system opens a new path for advanced oxidation.
Enhanced degradation of 4-nitrophenol by microwave assisted Fe/EDTA process.

Bo Liu,Song Li,Yongjun Zhao,Wenfei Wu,Xuxiang Zhang,Xueyuan Gu,Ruihua Li,Shaogui Yang

DOI: https://doi.org/10.1016/j.jhazmat.2009.11.015

IF: 13.6

2010-01-01

Journal of Hazardous Materials

Abstract:A microwave assisted zero-valent iron oxidation process was studied in order to investigate the synergetic effects of MW irradiation on Fe/EDTA system (Fe/EDTA/MW) treated 4-nitrophenol (4-NP) from aqueous solution. The results indicated that the thermal effect of microwave improved the removal effect of 4-NP and TOC through raising the temperature of the system, as well as the non-thermal effect generated by the interaction between the microwave and the Fe resulting in an increase in the hydrophobic character of Fe surface. During the degradation of 4-NP in Fe/EDTA/MW system, the optimum value for MW power, Fe, EDTA dosage was 400W, 2g and 0.4mM, respectively. The possible pathway for degrading the 4-NP was proposed based on GC/MS and HPLC analysis of the degradation intermediates. The concentration change course of the main bio-refractory by-products, the aminophenol formed in the degradation of 4-NP suggested a more efficient degradation and mineralization in Fe/EDTA/MW system. Finally, BOD5/CODCr of the solution increased from 0.237 to 0.635 after reaction for 18min, indicating that the biodegradability of wastewater was greatly improved by Fe/EDTA/MW system and would benefit to further treatment by biochemical methods.
Kinetics of Ultrasound-Enhanced Oxidation of P-Nitrophenol by Fenton'S Reagent

Deming Zhao,Cheng Ding,Chunxin Wu,Xinhua Xu

DOI: https://doi.org/10.1016/j.egypro.2012.01.025

2012-01-01

Abstract:Aqueous solutions of p-Nitrophenol (PNP) were oxidized by Fenton's reagent assisted by ultrasound (US) irradiation. The effects of operating parameters such as initial medium pH, initial concentration of PNP, the molar ratio of Fe2+/H2O2, the temperature and the type of saturating gas on the degradation rates of PNP were investigated. The results showed that both pH value and PNP concentration altered noticeably the reaction rates, with preferred operation conditions at low pH, and low PNP concentration. Among the four different saturating gases (namely Ar, O2, air and N2), PNP degradation in an oxygen-saturated solution was the fastest. The addition of Fenton's reagent could increase the PNP removal rate. PNP degradation followed apparent pseudo-first-order kinetics under US irradiation, Fenton's reagent oxidation and the combined US/Fenton's reagent oxidation process. The overall reaction rates were significantly enhanced in the US/Fenton's reagent oxidation system, most likely because ultrasound could accelerate Fenton's reagent to generate hydroxyl radical (.OH) and other reactive oxygen intermediates. There was an obvious synergetic effect in the combined US-Fenton's reagent process. The observed synergetic effects of the US/Fenton's reagent system resulted in an increase in the net PNP degradation rate by a factor of 2.06.
Heterogeneous Catalytic Oxidation for the Degradation of P-Nitrophenol in Aqueous Solution by Persulfate Activated with Cufe2o4 Magnetic Nano-Particles

Jun Li,Yi Ren,Fangzhou Ji,Bo Lai

DOI: https://doi.org/10.1016/j.cej.2017.04.104

IF: 15.1

2017-01-01

Chemical Engineering Journal

Abstract:To evaluate the heterogeneous degradation of p-nitrophenol (PNP) in aqueous solution by catalytic oxidation process involving persulfate (PS) activated by CuFe2O4 magnetic nano-particles, the CuFe2O4/PS system was investigated in this study. CuFe2O4 magnetic nano-particles were synthesized with a solgel combustion method and then used as heterogeneous catalysts for PS activation. First, effects of CuFe2O4 dosage (0-40 g/L), PS dosage (0-10 mM), initial pH value (3.0-11.0) and co-existing inorganic ions on the degradation of PNP in aqueous solution by CuFe2O4/PS system were investigated comprehensively. In particular, the maximum PNP removal (89%) and total organic carbon (TOC) removal (81%) were obtained under the optimal conditions. Meanwhile, two control experiments (i.e., CuFe2O4 alone and PS alone systems) were carried out to confirm the performance in CuFe2O4/PS system. Furthermore, the reasonable PNP degradation pathway was proposed based on the intermediates detected by high performance liquid chromatography (HPLC). Finally, the mechanism of the CuFe2O4/PS system was proposed thoroughly according to the characterization of catalyst, the analysis results of metal leaching and radical scavenging studies. In a word, this study provides an effective oxidative system for PNP removal by CuFe2O4/PS heterogeneous process at ambient temperature. (C) 2017 Elsevier B.V. All rights reserved.
Microwave Oxidation Process for Treatment of Phenol in Water with Ferrate Catalyst

Gu Xiaoli,Yao Chuncai,Luo Zhenyang,He Ming

DOI: https://doi.org/10.3969/j.issn.1002-154X.2007.07.012

2007-01-01

Abstract:The ferrate salts catalysts with spinel structure were prepared by coprecipitation method and the microwave oxidation process was developed to treat phenol in water.The Fe-Cu catalyst had higher catalytic eff ect than any other ferrate salts catalysts.The X-ray diffraction peaks of the catalyst show that the Fe-Cu sample has some special characteristic peaks besides α-Fe2O3 and spinel structure peaks,which is also confirmed by its IR spectrum.The effect of operating conditions on the Fe-Cu catalyst activity and its using life were studied.Under the optimal treatment conditions of catalyst amount of lwt% waste water,phenol concentration of 300 mg/L,H2O2 concentration of 750 mg/L,microwave power of 700 W,irradiation time of 10min,reaction temperature of 70℃ and pH≈4～6,a phenol removal rate of 96.89% is obtained.The catalyst can be used more than 10 times remaining a phenol removal rate of 96.07%.
Microwave-Induced Catalytic Oxidation Process for Treatment of Phenol in Water with Fe2O3/Al2O3 Catalyst

GY Zhang,P Wang,Y Shi,HJ Ma,G Hong

DOI: https://doi.org/10.3321/j.issn:0253-9837.2005.07.016

2005-01-01

CHINESE JOURNAL OF CATALYSIS (CHINESE VERSION)

Abstract:The ferric oxide catalyst was prepared by the dipping- calcination method using gamma-Al2O3 as a carrier and the microwave- induced oxidation process was developed to treat phenol in water. The catalyst structure was determined by XRD, XRF and N-2 adsorption. The effects of operating conditions on the catalyst activity, the using life of the catalyst and the reaction kinetics were studied. The results show that alpha-Fe2O3 is loaded on the surface of gamma-Al2O3 and the content of alpha-Fe2O3 in the catalyst is 3.71 %. Under the optimal treatment conditions of phenol concentration of 100 mg/L, microwave power of 400 W, irradiation time of 5 min, catalyst amount of 60 g/L, H2O2 concentration of 600 mg/L and pH > 4, a phenol removal rate of 97.98% is obtained. The catalyst can be reused more than 20 times remaining a phenol removal rate of 96. 34 %. The oxidation process can be divided into two stages, both of them are in accord with the first-order reaction kinetics.
Effect of Microwave Heating on Persulfate Activation for Rapid Degradation and Mineralization of P-Nitrophenol

Limin Hu,Guangshan Zhang,Qiao Wang,Xiaojing Wang,Peng Wang

DOI: https://doi.org/10.1021/acssuschemeng.9b01686

IF: 8.4

2019-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Microwave (MW) irradiation is a promising alternative method for the treatment of sewage. In the present work, persulfate (PS) was effectively activated under microwave heating for p-nitrophenol (PNP) degradation in water. As a result, at a microwave power of 300 W, PS was successfully activated by microwave, resulting in a superior PNP degradation efficiency (96.8%) within 14 min. The specific microwave effect was explored from the perspectives of the PS utilization efficiency and the reaction activation energy in the PS+MVV system, using a conventional heating system as the control. In addition, the effects of the initial pH, coexisting inorganic ions, and natural organic matter were evaluated, and the results showed that these three factors had negligible effects on PNP removal in the PS+MW system. Based on the results of the quenching experiment and electron paramagnetic resonance (EPR) detection, the major active radical was identified as SO4 center dot-, while center dot OH played a small role during the oxidation process. The practical application of this system was examined, and it performed well in two water matrices: secondary treated wastewater (WW) and the Songhua River.
Cu2S/Ni3S2 Nanosheets Combined with Nickel Foam Substrate for Efficient Catalytic Ozonation of P-Nitrophenol in Wastewater

Linjie Zhu,Siyi Zhou,Hao Cheng,Jianfeng Ma,Gunel Imanova,Sridhar Komarneni

DOI: https://doi.org/10.1016/j.jece.2024.113591

IF: 7.7

2024-01-01

Journal of Environmental Chemical Engineering

Abstract:Cu2S/Ni3S2@NF catalyst was prepared by hydrothermal method, and the catalytic ozonation of PNP solution (100 mg/L) was carried out. The removal rate of PNP under optimal experimental conditions was 99.9 % in 40 minutes, which was a significant increase over other systems. ESR revealed that singlet oxygen and superoxide radicals were the primary active ingredients. After the catalyst was used for five times, the catalytic activity remained basically unchanged. The possible degradation pathway and mechanism of Cu2S/Ni3S2@NF catalytic ozonation of PNP were proposed by gas chromatography-mass spectrometry. In real wastewater samples with complex compositions, the Cu2S/Ni3S2@NF/O3 system also achieved efficient degradation. The mechanism and possible pathway of Cu2S/Ni3S2@NF catalytic ozonation of PNP were proposed. This study provides an efficient, durable, and easy-to-recycle ozone catalyst, which provides a feasible pathway for the treatment of phenolic pollutants.
Cu(II)–Fe(II)–H2O2 Oxidative Removal of 3-Nitroaniline in Water under Microwave Irradiation

Nannan Wang,Tong Zheng,Jiping Jiang,Peng Wang

DOI: https://doi.org/10.1016/j.cej.2014.09.002

IF: 15.1

2014-01-01

Chemical Engineering Journal

Abstract:Cu(II)–Fe(II)–H2O2 process was studied through degrading 3-nitroaniline (3-NA) in water under microwave (MW) irradiation. The experimental conditions were studied by investigating the removal rates and reaction rate constants of 3-NA at different levels of influence factors. The removal rates and reaction rate constants both increased with the increase of Cu(II), Fe(II) and H2O2 dosages when they were at reasonable concentration ranges ([Cu(II)] 0.0016–0.0094mmolL−1, [Fe(II)] 0.051–0.205mmolL−1 and [H2O2] 4.34–17.34mmolL−1). Under the examined conditions (initial pH=5.3, [Cu(II)], [Fe(II)] and [H2O2] were 0.0078, 0.205 and 17.37mmolL−1, respectively, PMW=100W, V3-NA=400mL), more than 92% of 3-NA was removed at 8.5min and the reaction rate constant reached 0.310min−1. Furthermore, the mathematical relationship between reaction rate constants and reactants concentrations was obtained via kinetic study, the result was k=43.9·e-2905.2T·[H2O2]1.675·[Fe(II)]0.908·[Cu(II)]0.080. Finally, the probable effect of Cu(II) in Cu(II)-Fenton process under MW irradiation was speculated according to the comparison result of 2-hydroxyterephtalic acid (generated by the reaction between hydroxyl radicals and terephthalic acid) intensity, the study of synergetic effects of Cu(II) and Fe(II) in Cu(II)-Fenton process and the comparative analysis of reaction mechanisms in Fenton process and Cu(II)–H2O2 process.
Oxidative Degradation of Nitrobenzene by a Fenton-like Reaction with Fe-Cu Bimetallic Catalysts

Yang Sun,Zixu Yang,Pengfei Tian,Yiyi Sheng,Jing Xu,Yi-Fan Han

DOI: https://doi.org/10.1016/j.apcatb.2018.11.009

2018-01-01

Abstract:De-nitrogen of organic contaminants in industrial wastewater is a great challenge for environmental remediation. In this work, alumina-supported bimetallic Fe-Cu catalysts were synthesized using a sol-gel method and exhibited high performance in catalytic degradation of nitrobenzene (NB). The bimetallic 5Fe2.5Cu-Al2O3 catalyst showed a 100% NB (100 ppm) removal within 1 h, which was superior to the NB degradation efficiency over monometallic Fe and Cu catalysts. With combination of the catalytic performance and the characterization results of X-ray photoelectron spectroscopy and H-2-temperature-programmed reduction, we proposed that the synergistic effect between Fe and Cu species played a vital role in promoting the reduction of Fe3+ to Fe2+, thus enhancing the generation of hydroxyl radicals ((OH)-O-center dot) and the degradation efficiency of NB. To elucidate the degradation pathway, gas chromatography-mass spectrometry and dynamic ultraviolet-visible spectroscopy were used to detect the intermediates during the degradation process. The results indicated that the degradation predominantly occurred via electrophilic addition of aromatic ring by (OH)-O-center dot, followed by the ring opening reaction and mineralization reaction. Moreover, NB can be efficiently decomposed into less stable aniline, which is apt to degrade. This work has not only made significant progress on the development of high-performance catalysts for the degradation of NB, but also provided a deep understanding of the mechanism for NB degradation.
Degradation of P -Nitrophenol by Fe 0 /H 2 O 2 /persulfate System: Optimization, Performance and Mechanisms

Jun Li,Qingqing Ji,Bo Lai,Donghai Yuan

DOI: https://doi.org/10.1016/j.jtice.2017.09.002

IF: 5.477

2017-01-01

Journal of the Taiwan Institute of Chemical Engineers

Abstract:In this study, a Fe-0/H2O2/persulfate system was developed to degrade p-nitrophenol (PNP) in aqueous solution, and 7 control experiments were setup to evaluate the synergistic effects in Fe-0/H2O2/persulfate system. First, effects of Fe-0 dosage (0-4.0 H2O2 dosage (0-30.0 mM), persulfate dosage (0-25.0 mM) and initial pH value (3.0-13.0) on PNP removal by the Fe-0/H2O2/persulfate system were investigated through single-factor experiments. Furthermore, the optimal parameters (i.e., 1.3 g/L Fe-0, 24.8 mM H2O2, 6.7 mM persulfate and initial pH of 5.1) were obtained through response surface methodology (RSM). Meanwhile, a high PNP removal (99.9%) obtained under the optimal conditions was mainly ascribed to the strong synergistic effects among Fe-0, H2O2 and persulfate. Furthermore, PNP degradation pathway was proposed according to the detected intermediates. In addition, the reaction mechanism of Fe-0/H2O2/persulfate system was proposed according to iron corrosion products detected by using SEM-EDS, XRD and XPS. In a word, all the results suggest that Fe-0/H2O2/persulfate system should be recommended as a valid method for the treatment of toxic and intractable industrial wastewater. (C) 2017 Taiwan Institute of Chemical Engineers. Published by Elsevier B.V. All rights reserved.
Exploration of Copper-Cysteamine Nanoparticles As an Efficient Heterogeneous Fenton-like Catalyst for Wastewater Treatment

N. K. Pandey,H. B. Li,L. Chudal,B. Bui,E. Amador,M. B. Zhang,H. M. Yu,M. L. Chen,X. Luo,W. Chen

DOI: https://doi.org/10.1016/j.mtphys.2021.100587

IF: 11.021

2022-01-01

Materials Today Physics

Abstract:Copper-cysteamine (Cu-Cy) is a new nanoparticle that can be stimulated by UV light, microwaves, X-rays, and ultrasound to produce various types of reactive oxygen species (ROS) for cancer and infectious disease treatments. Most importantly, our recent studies revealed that Cu-Cy nanoparticles (NPs) can be used for wastewater treatment as an effective heterogeneous Fenton-like catalyst, thereby adding one more important practical application of this interesting material. Herein, for the first time, we describe the use of Cu-Cy NPs with the assistance of hydrogen peroxide (H2O2) as an oxidizing agent for the oxidative degradation of organic contaminants, particularly rhodamine B (RhB), methylene blue (MB), and 4-nitrophenol (4-NP), for wastewater treatment. Additionally, we compared two H2O2 oxidation methods for the treatment of RhB and 4-NP: oxidation using H2O2/Cu-Cy with or without microwave (MW) irradiation. Our findings show that the degradation rate enhanced when activated by MW irradiation. Furthermore, recycling experiments revealed that Cu-Cy has good stability and recyclability. Overall, it is believed that the Cu-Cy/H2O2 system studied in this work could be used in advanced oxidation processes toward the degradation of organic pollutants.
Synthesis oxygen vacancies enriched CuO hierarchical nanosheets for peroxymonosulfate activation toward P-nitrophenol degradation and mechanism

Dongyan Wang,Min Wang,Zhenqi Xu,Ying Hu,Jiwen Zhong,Taizhuo Ma

DOI: https://doi.org/10.1016/j.seppur.2024.126262

IF: 8.6

2024-05-01

Separation and Purification Technology

Abstract:In this work, hierarchical copper oxide (CuO) nanosheet with rich oxygen vacancies was prepared with a facile biotemplates derivatization method. Results show that the as-prepared optimum CuO-II exhibited excellent catalytic performance for peroxymonosulfate (PMS) activation mainly benefiting from large specific surface area and electron transfer efficiency, abundant Cu+ and oxygen vacancies in catalyst. Almost 100 % of P-nitrophenol (PNP) can be degrade within 10 min by CuO-II activating PMS process. The electron paramagnetic resonance (EPR) spectroscopy, reactive species quenching tests and density functional theory (DFT) calculation results revealed that Cu(III)-mediated electron transfer and sulfate radicals were identified as the dominantly responsible for PNP degradation. Meanwhile, CuO-II/PMS system can degrade PNP in a wide range of pH (pH 3 ∼ 10) and with inorganic anions and natural organic matter presence. In addition, CuO-II catalyst has good stability and reusability and performed well toward PNP degradation in the continuous operation. This work not only obtained a facile preparation strategy for obtaining CuO catalyst with excellent catalytic performance, but also gave a new idea for studying the mechanism of CuO activating PMS.

engineering, chemical

Degradation of P-Nitrophenol Using CuO/Al2O3 As a Fenton-like Catalyst under Microwave Irradiation

Treatment of p-nitrophenol in water by Fenton-like reaction with microwave coupling

Enhanced Conversion from H2O2 to 1O2 on Cu–N Centers: Investigation of Mechanisms and Application in Alkaline Wastewater Treatment

Catalytic Degradation of P-Nitrophenol by Magnetically Recoverable Fe3O4 As a Persulfate Activator under Microwave Irradiation.

Facile and Rapid Microwave-Assisted Preparation of Cu/Fe-AO-PAN Fiber for PNP Degradation in a Photo-Fenton System under Visible Light Irradiation

Phenolic Wastewater Treatment by Microwave-Induced H2o2-Fe(Iii)-Cu(Ii)/Gamma-Al2o3 Catalytic Oxidation Process

Pilot-scale Treatment of P-Nitrophenol Wastewater by Microwave-Enhanced Fenton Oxidation Process: Effects of System Parameters and Kinetics Study

High efficiency degradation of 4-nitrophenol by microwave-enhanced catalytic method

Enhanced Persulfate Oxidation of Organic Pollutants and Removal of Total Organic Carbons Using Natural Magnetite and Microwave Irradiation

Enhanced degradation of 4-nitrophenol by microwave assisted Fe/EDTA process.

Kinetics of Ultrasound-Enhanced Oxidation of P-Nitrophenol by Fenton'S Reagent

Heterogeneous Catalytic Oxidation for the Degradation of P-Nitrophenol in Aqueous Solution by Persulfate Activated with Cufe2o4 Magnetic Nano-Particles

Microwave Oxidation Process for Treatment of Phenol in Water with Ferrate Catalyst

Microwave-Induced Catalytic Oxidation Process for Treatment of Phenol in Water with Fe2O3/Al2O3 Catalyst

Effect of Microwave Heating on Persulfate Activation for Rapid Degradation and Mineralization of P-Nitrophenol

Cu2S/Ni3S2 Nanosheets Combined with Nickel Foam Substrate for Efficient Catalytic Ozonation of P-Nitrophenol in Wastewater

Cu(II)–Fe(II)–H2O2 Oxidative Removal of 3-Nitroaniline in Water under Microwave Irradiation

Oxidative Degradation of Nitrobenzene by a Fenton-like Reaction with Fe-Cu Bimetallic Catalysts

Degradation of P -Nitrophenol by Fe 0 /H 2 O 2 /persulfate System: Optimization, Performance and Mechanisms

Exploration of Copper-Cysteamine Nanoparticles As an Efficient Heterogeneous Fenton-like Catalyst for Wastewater Treatment

Synthesis oxygen vacancies enriched CuO hierarchical nanosheets for peroxymonosulfate activation toward P-nitrophenol degradation and mechanism