Abstract:In this work, perovskite intercalated montmorillonite (MMT) composite catalyst loaded by different mass fraction iron oxide, xFe2O3/LaCu0.5Co0.5O3-MMT0.2 (x was the mass fraction of Fe2O3 and x=0.02, 0.04, 0.06), were prepared by impregnation method, and their catalytic activity were evaluated by microwave induced catalytic degradation of bisphenol A (BPA). Fe2O3 had a certain absorption effect on microwave, which could enhance the absorption property of composite material, improve the catalytic activity of catalyst. XRD, SEM, XPS and vector network analysis were used to analysis the structure, morphology, surface element composition and microwave absorption performance of the composite catalyst. The results indicated that the sample had uniform structure, a larger specific surface, a higher ratio of Oads/Olat and excellent microwave absorption performance. The effects of microwave power, pH value and H2O2 dosage on the catalytic degradation performance were studied, and 0.04Fe2O3/LCCOM0.2 had the most obvious effect on the removal of BPA. The possible reaction mechanisms were discussed by characterization and experimental results of free radical capture. The surface active sites of the catalyst could be excited by microwave to generate oxidative free radicals, which could degrade BPA through electron hole transport. Response surface methodology (RSM) was used to optimize the operation parameters for the 0.04Fe2O3/LCCOM0.2-BPA microwave degradation system.

Enhanced degradation of 4-nitrophenol by microwave assisted Fe/EDTA process.

Enhancement of the advanced Fenton process by weak magnetic field for the degradation of 4-nitrophenol

High efficiency degradation of 4-nitrophenol by microwave-enhanced catalytic method

THE EFFECT OF EDTA ON THE DEGRADATION OF 4-NITROPHENOL IN MICRO-ELECTROLYSIS SYSTEM

Catalytic Degradation of Organic Contaminants by Microwave-Assisted Persulfate Activation System: Performance and Mechanism

An Improved UV/Fe3+ Process by Combination with Electrocatalysis for P-Nitrophenol Degradation.

Ozonation with Ultrasonic Enhancement of P-Nitrophenol Wastewater

Microwave enhanced Fenton process for the removal of methylene blue from aqueous solution

Degradation of P-Nitrophenol (PNP) in Aqueous Solution by Fe0-PM-PS System Through Response Surface Methodology (RSM)

Microwave-enhanced catalytic degradation of 4-chlorophenol over nickel oxides under low temperature

Enhanced 4-chlorophenol biodegradation by integrating Fe2O3 nanoparticles into an anaerobic reactor: Long-term performance and underlying mechanism

Highly efficient microwave-assisted Fenton degradation bisphenol A using iron oxide modified double perovskite intercalated montmorillonite composite nanomaterial as catalyst

Degradation and detoxification of 4-nitrophenol by advanced oxidation technologies and bench-scale constructed wetlands

Effect of various sono-oxidation parameters on the removal of aqueous 2,4-dinitrophenol.

Enhanced degradation of 4-Cholophenol by activation of peroxymonosulfate with Fe-MOF@Mn 2 O 3 : Performance and mechanism

Degradation of 4-Chlorophenol Solution by Synergetic Effect of Dual-frequency Ultrasound with Fenton Reagent

Regulating Hydroxyl Radicals (•OH) and Hydrated Electron (eaq) for Enhanced Radiolytic Degradation of 4-Nitrophenol by Addition of H2O2

Sources of the active substances in microwave catalytic redox processes induced by iron-based carbon materials: The key role of B doping

Fenton-like Degradation of 2,4-Dichlorophenol Using Fe3O4 Magnetic Nanoparticles

Study on the advanced treatment of antibiotic wastewater by microwave-assisted Fenton oxidation

Microwave-Enhanced Fenton-Like System, Fe3O4/H2O2 for Rhodamine B Wastewater Degradation