Water-Dispersible Fe3o4 Nanowires As Efficient Supports for Noble-Metal Catalysed Aqueous Reactions

Yujiao Jiang,Guozhu Li,Xiaodi Li,Shuxiang Lu,Li Wang,Xiangwen Zhang

DOI: https://doi.org/10.1039/c3ta15097f

IF: 11.9

2014-01-01

Journal of Materials Chemistry A

Abstract:Water-dispersible magnetic Fe3O4 nanowires were synthesized at room temperature by the coprecipitation method using bio-inspired dopamine as a shape-directing surfactant.

What problem does this paper attempt to address?

Cobalt And Vanadium Co-Doped Feooh Nanoribbons: An Iron-Rich Electrocatalyst For Efficient Water Oxidation

X Wang,W Liu,J Wang,C Li,R Zheng,H Zhang,J Liu,X Zhang

DOI: https://doi.org/10.1039/d1qm00751c

IF: 8.6834

2021-01-01

Materials Chemistry Frontiers

Abstract:Exploring non-noble metal catalysts with low-cost and excellent performance for the oxygen evolution reaction (OER) is of great importance for energy conversion technologies. Fe is the second most abundant metal on the earth and is cheaper than Co or Ni, but Fe-rich catalysts still suffer from poor catalytic activity toward the OER. Herein, a novel Fe-rich nanoribbon catalyst ((Co,V)-FeOOH) was prepared by a primary battery powered strategy. (Co,V)-FeOOH shows ultralow overpotentials of 230 and 322 mV at current densities of 10 and 500 mA cm(-2) in 1 M KOH, respectively. Systematic experiments and DFT calculations are performed to prove that the doped Co and V elements can synergistically optimize the electronic structure and free energy for adsorbed intermediates of FeOOH, thus leading to an enhanced OER activity of (Co,V)-FeOOH nanoribbons. This work shows that the low-cost Fe-rich OER catalyst prepared by an effective and economic method can be highly efficient and provides a possibility for the design of advanced OER electrocatalysts.
Synthesis and Characterization of Fe−Fe2O3 Core−Shell Nanowires and Nanonecklaces

Lirong Lu,Zhihui Ai,Jinpo Li,Zhi Zheng,Quan Li,Lizhi Zhang

DOI: https://doi.org/10.1021/cg060633a

IF: 4.01

2007-01-01

Crystal Growth & Design

Abstract:Fe-Fe2O3 core-shell nanowires and nanonecklaces were obtained simply through controlling the reduction rate of Fe3+ ions by sodium borohydride in aqueous solution at ambient atmosphere. The resulting materials were characterized by X-ray powder diffraction, scanning electron microscopy images and energy dispersive X-ray spectrum, transmission electron microscopy, elemental mapping, X-ray photoemission spectroscopy, and magnetization measurements. A possible formation mechanism was proposed on the basis of characterization results. It was interesting to find that the core-shell nanowires used in electrochemical-assisted and ultrasound-assisted Fenton-like reaction systems could much more efficiently degrade organic pollutant in aqueous solutions than traditional Fenton reagent Fe2+ ions under neutral pH and pH 2, respectively. This study indicates that the resulting iron-containing nanostructures are promising materials in magnetic, environmental, and catalytic fields.
Electrocatalysis: Reduced Mesoporous Co3O4 Nanowires as Efficient Water Oxidation Electrocatalysts and Supercapacitor Electrodes (Adv. Energy Mater. 16/2014)

yongcheng wang,tong zhou,kun jiang,peimei da,zheng peng,jing tang,biao kong,wenbin cai,zhongqin yang,gengfeng zheng

DOI: https://doi.org/10.1002/aenm.201470082

IF: 27.8

2014-01-01

Advanced Energy Materials

Abstract:In article number 1400696, Zhongqin Yang, Gengfeng Zheng, and co-workers report the use of chemically reduced, mesoporous Co3O4 nanowires for enhanced sunlight-driven water splitting and oxygen evolution reaction. Mesoporous Co3O4 nanowires are effectively reduced by NaBH4 and new oxygen vacancies are formed during this process. These oxygen vacancies lead to much higher electrical conductivity and electrocatalytic activity of Co3O4 nanowires.
One-pot synthesis of hierarchical magnetite nanochain assemblies with complex building units and their application for water treatment

Minrui Gao,Shiran Zhang,Jun Jiang,Yarong Zheng,DongQing Tao,Shuhong Yu

DOI: https://doi.org/10.1039/c1jm13517a

2011-01-01

Journal of Materials Chemistry

Abstract:We report that unique hierarchical magnetite (Fe3O4) nanochain assemblies with complex flower-like nanostructures as secondary building blocks and smaller nanoparticles as primary building blocks can be prepared by a facile and surfactant-free one-pot approach using Fe(acac)(3) as precursor in polyol solution. The resultant Fe3O4 nanochains possess superparamagnetic property, large saturation magnetization (82.1 emu/g), high Brunauer-Emmett-Teller (BET) specific surface area (43.5 m(2) g(-1)), and also good water-dispersibility. Thanks to these wonderful intrinsic properties, the Fe3O4 nanochains exhibit excellent ability to remove an organic pollutant in waste water. For example, Congo red, a common azo-dye in textile industry, can be completely removed within 5 min at room temperature when the initial concentration of Congo red in solution was 100 mg/L. In addition, the Fe3O4 assembled tertiary chain-like structures can be recycled by a simple heat treatment, which keeps almost the same removal ability and a litter slower adsorption rate even used for the third time. Beyond as an adsorbent for water treatment, these Fe3O4 nanochain assemblies may be useful in other fields such as magnetic resonance imaging (MRI), and drug delivery based on their novel structures and intrinsic multi-functionalities.
Sub-1 nm Nickel Molybdate Nanowires as Building Blocks of Flexible Paper and Electrochemical Catalyst for Water Oxidation.

Huiling Liu,Haoyi Li,Peilei He,Xun Wang

DOI: https://doi.org/10.1002/smll.201503150

IF: 13.3

2016-01-01

Small

Abstract:Sub-1 nm, extremely long nickel molybdate nanowires are synthesized based on a good/poor solvent system. The ultrathin nanowires can be hierarchically assembled into flexible, free-standing films with good mechanical properties. Compared with the large-size counterpart, nickel molybdate ultrathin nanowires display promising oxygen evolution reaction catalytic performance derived from the ultrathin feature.
Magnetic Field-Assisted Electrodeposition of Fe 3 O 4 Nanoparticles on Ni as Bifunctional Electrocatalyst for Overall Water Splitting

Fankai Zhu,Yuqing Wang,Yuanlong Chen,Muyao Wu,Wei Jiang

DOI: https://doi.org/10.1021/acsanm.3c03630

IF: 6.14

2023-10-19

ACS Applied Nano Materials

Abstract:Hydrogen energy is gaining widespread attention as a green energy source. However, the existing catalysts have high overpotential and kinetic reaction energy barriers, which have seriously affected the catalytic efficiency of hydrogen production from overall water splitting, and the existing metal catalysts cannot be used on a large scale because of scarce resources and high costs. Therefore, it is an urgent need to find an excellent stable transition, low-cost, and high-activity metal-based bifunctional catalyst. In this work, a method is proposed to prepare Ni/Fe3O4 catalytic electrodes by modulating the magnetic field to guide the adsorption of magnetic nanoparticles Fe3O4 on the catalytic electrode surface. It was found that in the case of the added 5 g/L Fe3O4 magnetic nanoparticles coupled with a single magnetic field, the catalytic electrode was measured in an alkaline solution, and the overpotentials of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) reactions reached 143 and 262 mV at the current density of 10 mA cm–2, with Tafel slopes of 39 and 40 mV dec–1, respectively. Compared to existing transition metal catalytic electrodes, the Ni/Fe3O4 catalytic electrode presents an outstanding catalytic performance in both HER and OER. Moreover, this work demonstrates that superior bifunctional catalytic electrodes with micro/nanostructures can be prepared by regulating different magnetic fields to guide the deposition of magnetic nanoparticles Fe3O4, which provides theoretical evidence for the preparation of future bifunctional catalytic electrodes.

materials science, multidisciplinary,nanoscience & nanotechnology
A General Route to Synthesize Water-Dispersive Noble Metal-Iron Oxide Bifunctional Hybrid Nanoparticles

Hui Wang,Yubing Sun,Yifei Yu,Jian Chen,Ran Li,Kai Cheng,Qianwang Chen

DOI: https://doi.org/10.1039/c1dt11673h

IF: 4

2011-01-01

Dalton Transactions

Abstract:This communication describes a simple, general route for preparing bifunctional hybrid nanoparticles based on direct adsorption and spontaneous reduction of Ag(+) and Pd(2+) onto the surface of carbon-encapsulated superparamagnetic colloidal nanoclusters. Because of the existence of carbon coating and surface hydrophilic carboxyl, the bifunctional hybrid nanoparticles show excellent water-dispersity. In addition, the size (35 nm-86 nm) and number of Ag nanocrystals can be tuned by changing the molar ratios and reaction concentration between Ag(+) and nanoclusters.
FeNi3-Fe3O4 heterogeneous nanoparticles anchored on 2D MOF nanosheets/1D CNTs matrix as highly efficient bifunctional electrocatalyst for water splitting

Katam Srinivas,Yingjiong Lu,Yuanfu Chen,Wanli Zhang,Dongxu Yang

DOI: https://doi.org/10.1021/acssuschemeng.9b07182

IF: 8.4

2020-01-01

ACS Sustainable Chemistry & Engineering

Abstract:It is still challengeable to develop a non-precious bifunctional electrocatalysts for both hydrogen and oxygen evolution reactions, with higher efficiency and superior durability over the benchmark noble metal-based electrocatalysts. To address such issues, for the first time, we design and synthesize FeNi3-Fe3O4 heterogeneous nanoparticles homogenous-ly anchored on a matrix of MOF nanosheets and carbon nanotubes (FeNi3-Fe3O4 NPs/MOF-CNT), by a facile hydro-thermal reaction and subsequent partial decomposition of a low-cost and earth-abundant Ni/Fe/C precursor. Due to its unique porous nanoarchitecture constructed by ultrafine nanoparticles anchored on 2D nanosheets/1D CNTs matrix, it can be employed as a bifunctional electrocatalyst with superior electrocatalytic activity for water splitting: it delivers a small Tafel slope of 37 mV/dec for OER and requires only a very low overpotential of 234 mV to obtain 10 mA cm-2; it has very low overpotential of 108 mV for HER and also shows an ultra-low overpotenti...
From "Waste To Gold": A One-Pot Method To Synthesize Ultrafinely Dispersed Fe2o3-Based Nanoparticles On N-Doped Carbon For Synergistic And Efficient Water Splitting

diefeng su,jing wang,haiyan jin,yutong gong,mingming li,zhenfeng pang,yong wang

DOI: https://doi.org/10.1039/c5ta02217g

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:We report a novel, simple, and one-pot method for the synthesis of ultrafinely dispersed iron oxide based nanoparticles (NPs) embedded in a nitrogen doped carbon matrix (denoted as Fe2O3/Fe@CN). A well-designed iron oxide based hybrid that demonstrates high activity and excellent durability for the HER in alkaline solution has been reported for the first time. The catalyst displays a small Tafel slope of 114 mV per decade and good electrocatalytic stability for 30 000 seconds. Detailed electrochemical and physical studies indicate that the high HER activity of the hybrid catalyst results from the strong interaction between Fe-based NPs and N-doped graphitic carbon, and especially the synergistic effect of Fe and Fe2O3.
Fe@Fe2O3 Core-shell nanowires as iron reagent. 1. Efficient degradation of rhodamine by a novel sono-fenton process

Zhihui Ai,Lirong Lu,Jinpo Li,Lizhi Zhang,Jianrong Qiu,Minghu Wu

DOI: https://doi.org/10.1021/jp065559l

2007-01-01

Abstract:In this study, Fe@Fe2O3 core-shell nanowires were first used as a novel Fenton iron reagent. The nanowires were synthesized through the reduction of ferric chloride aqueous solution by sodium borohydride at ambient atmosphere, without protection of inert gases or vacuum. Rhodamine B (RhB) could be efficiently degraded in aqueous media by a novel sonochemical-assisted Fenton (sono-Fenton) system based on these Fe@Fe2O3 core-shell nanowires. The RhB degradation processes were monitored by UV-vis spectroscopy and total organic carbon (TOC) analysis. Fe@Fe2O3 core-shell nanowires showed much higher activity in the sono-Fenton system than other iron reagents such as commercial zerovalent iron powders (Fe-0), ferrous ions (Fe2+), and ferric ions (Fe3+). It was found that near 100% decoloration and over 60% TOC removal of RhB (5 mg center dot L-1) could be achieved in 60 min by this novel sono-Fenton system with 0.018 mol center dot L-1 Fe@Fe2O3 core-shell nanowires. This new iron reagents before and after the sono-Fenton reaction were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The characterizations found that the nanowires were transferred to nanotubes/nanoparticles covered with Fe3O4/Fe2O3 after the sono-Fenton process. A possible mechanism of sono-Fenton degradation of RhB with Fe@Fe2O3 nanowires was proposed on the basis of the experimental results. It involved homogeneous Fenton and heterogeneous Fenton oxidative degradation simultaneously. The high activity of core-shell Fe@Fe2O3 nanowires and the success of their mass production make them attractive for the treatment of organic pollutants in water.
Preparation of Water-Soluble Magnetite Nanocrystals Through Hydrothermal Approach

Shouhu Xuan,Lingyun Hao,Wanquan Jiang,Xinglong Gong,Yuan Hu,Zuyao Chen

DOI: https://doi.org/10.1016/j.jmmm.2006.05.017

IF: 3.097

2007-01-01

Journal of Magnetism and Magnetic Materials

Abstract:Water-soluble Fe3O4 nanocrystals have been prepared through hydrothermal approach. These nanocrystals capped with C6H6O6 (the oxidation state of ascorbic acid) could be readily dispersed in hydrated aqueous systems. The final product was characterized with X-ray powder diffraction (XRD), transmission electron microscope (TEM), Fourier Transform Infrared and X-ray photoelectron spectroscopy. From XRD patterns, we confirm the product to be Fe3O4. The nanoparticles several nanometers long were well dispersed as shown in TEM image. Magnetic hysteresis loop measurements showed that the Fe3O4 nanocrystals display superparamagnetism. A possible formation mechanism of the Fe3O4 nanocrystals was suggested.
Synthesis Of Porous Magnetic Ferrite Nanowires Containing Mn And Their Application In Water Treatment

Haojie Cui,Jianwen Shi,Baoling Yuan,Minglai Fu

DOI: https://doi.org/10.1039/c3ta01692g

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:Two kinds of porous magnetic ferrite nanowires containing manganese (MnFe2O4 and Mn doped Fe3O4) have been successfully synthesized by thermal decomposition of organometallic compounds, using nitrilotriacetic acid (NA) as a chelating agent to coordinate with various ratios of Fe(II) and Mn(II) ions. The resultant MnFe2O4 and Mn doped Fe3O4 nanostructures are superparamagnetic, and have magnetization saturation values of about 45.9 and 48.7 emu g(-1) for MnFe2O4 and Mn doped Fe3O4, respectively. The Brunauer-Emmett-Teller specific surface areas of the MnFe2O4 and Mn doped Fe3O4 are 37.8 and 45.4 m(2) g(-1), respectively. The as-prepared porous MnFe2O4 and Mn doped Fe3O4 nanowires exhibit excellent ability to remove heavy metal ions and organic pollutant in waste water. In addition, these porous magnetic ferrites may be useful in other fields such as biomedicine and Li-ion batteries.
A practical-oriented NiFe-based water-oxidation catalyst enabled by ambient redox and hydrolysis co-precipitation strategy

Wenxin Zhu,Tianshu Zhang,Yi Zhang,Zhihao Yue,Yinge Li,Rong Wang,Yanwei Ji,Xuping Sun,Jianlong Wang

DOI: https://doi.org/10.1016/j.apcatb.2018.12.021

2019-01-01

Abstract:A facile ambient redox and hydrolysis co-precipitation strategy enables ultralow-cost and large-scale production of well-aligned nickel-iron hydroxide nanosheets array on Ni foam toward practical-oriented high-performance water oxidation.
Catalysis: NiMo Solid Solution Nanowire Array Electrodes for Highly Efficient Hydrogen Evolution Reaction (Adv. Funct. Mater. 44/2019)

Adeela Nairan,Peichao Zou,Caiwu Liang,Jiaxing Liu,Dang Wu,Peng Liu,Cheng Yang

DOI: https://doi.org/10.1002/adfm.201970308

IF: 19

2019-01-01

Advanced Functional Materials

Abstract:In article number 1903747, Cheng Yang and co-workers present a simple method for industrial scale fabrication of 3D NiMo solid solution nanowire array-based electrodes. Activity for hydrogen evolution reaction could be achieved by tuning the Mo content and synthesis temperature. The increased interfacial activity by alloy formation, and plenty of active sites at the nanowire surface collectively contribute to the remarkably enhanced catalytic activity and electrochemical stability.
Alkoxide-intercalated NiFe-layered double hydroxides magnetic nanosheets as efficient water oxidation electrocatalysts

Jose A. Carrasco,Jorge Romero,María Varela,Frank Hauke,Gonzalo Abellán,Andreas Hirsch,Eugenio Coronado

DOI: https://doi.org/10.48550/arXiv.1805.11668

IF: 2.552

2018-05-06

Chemical Physics

Abstract:Alkoxide-intercalated NiFe-layered double hydroxides were synthesized via the nonaqueous methanolic route. These nanoplatelets exhibit high crystalline quality as demonstrated by atomic resolution scanning transmission electron microscopy combined with electron energy-loss spectroscopy. Moreover, the presence of the alkoxide moieties has been unambiguously demonstrated by means of thermogravimetric analysis coupled to a mass spectrometer. These NiFe-LDHs can be exfoliated in water or organic solvents and processed into homogeneous ultra-thin films (< 3nm thick) with the assistance of O2-plasma. The study of their behaviour as water oxidation electrocatalysts has shown an outstanding performance at basic pHs (small overpotential of ca. 249 mV and Tafel slopes in the range of 52-55 mV per decade).
Direct Growth Of Porous Crystalline Nico2o4 Nanowire Arrays On A Conductive Electrode For High-Performance Electrocatalytic Water Oxidation

xingxing yu,zijun sun,zhiping yan,bin xiang,xiang liu,pingwu du

DOI: https://doi.org/10.1039/c4ta05315j

IF: 11.9

2014-01-01

Journal of Materials Chemistry A

Abstract:Herein we report a facile and direct synthesis of porous NiCo2O4 nanowire arrays (NWAs) with robust mechanical adhesion to conductive electrodes by a simple two-step method. Upon complete pyrolysis of the cobalt-nickel-hydroxide precursor, high-quality crystalline NiCo2O4 is achieved. The porous NiCo2O4 nanowires were found to be highly active for catalytic water oxidation when serving as the working electrodes without any external materials (binder and/or carbon black), as evidenced by exhibiting higher catalytic current density for water oxidation compared to precious metal oxide catalysts such as iridium oxide (IrO2) under the same conditions and appreciable catalytic wave at similar to 1.52 V (vs. RHE). The optimal performance of the as-synthesized NiCo2O4 nanowires showed a current density of 10 mA cm(-2) under an overpotential of only 0.46 V and 20 mA cm(-2) under an overpotential of 0.72 V, corresponding to a Faradaic efficiency of nearly 100%. The atomic-scale analysis of the NiCo2O4 nanowires was further conducted by spherical-aberration-corrected transmission electron microscopy (TEM). The highly exposed high-index facets and one-dimensional (1D) configuration of the as-synthesized porous NiCo2O4 nanowires may be responsible for the high catalytic performance of water oxidation, which exhibit excellent activity and unique advantages for catalytic water splitting.
Preparation and characterization of water-soluble monodisperse magnetic iron oxide nanoparticles via surface double-exchange with DMSA

Z.P. Chen,Y. Zhang,S. Zhang,J.G. Xia,J.W. Liu,K. Xu,N. Gu

DOI: https://doi.org/10.1016/j.colsurfa.2007.09.017

2008-01-01

Abstract:A simple, but efficient method for preparation of water-soluble iron oxide nanoparticles has been developed. Monodisperse Fe3O4 nanoparticles were synthesized by thermal decomposition of iron-oleate. Surface double-exchange of oleic acid capped monodisperse Fe3O4 nanoparticles with a familiar 2,3-dimercaptosuccinnic acid (HOOC–CH(SH)–CH(SH)–COOH, DMSA) was first performed in chloroform in the presence of triethylamine, and then this process was repeated in ethanol under the same conditions. The resulting Fe3O4 nanoparticles could be transferred into water to form stable magnetic fluid without post-treatment processes such as filtration and re-concentration. TEM images show that water-soluble Fe3O4 nanoparticles remain monodisperse and even form a monolayer of ordered assembly, and the results of TGA, VSM show that Fe3O4 nanoparticles via surface double-exchange possess more DMSA molecules through intermolecular disulfide cross-linking between DMSA, as confirmed by Raman spectra. Zeta potential measurements show that nanoparticles after surface double-exchange are negatively charged in the range of pH=1–14, and stability assays exhibit their excellent stability in water and other physiological environments.
Activating Three-Dimensional Networks of Fe@Ni Nanofibers Via Fast Surface Modification for Efficient Overall Water Splitting.

Jingying Tao,Yijie Zhang,Shengping Wang,Ge Wang,Fei Hu,Xiaojun Yan,Lifeng Hao,Zhijun Zuo,Xiaowei Yang

DOI: https://doi.org/10.1021/acsami.9b01431

IF: 9.5

2019-01-01

ACS Applied Materials & Interfaces

Abstract:Developing facile approaches to synthesize highly active and stable oxygen and hydrogen evolution electrocatalysts under mild conditions is crucial in water-splitting technology. Herein, Ni-nanofiber-based three-dimensional (3D) network is prepared by a magnetic-field-assisted reduction reaction and then a fast surface modification within only 3 s at room temperature is developed to prepare Fe@Ni-nanofiber-based 3D porous electrode. The unique structure of the nanofiber-based 3D electrode ensures large electrochemical active surface area, short electron diffusion pathway, and fast mass transportation, while the introduction of Fe enhances the activity of each active site with abundant Ni(Fe) (oxy)hydroxide on the surface. Hence, the obtained Fe@Ni nanofiber electrode exhibits excellent activity and stability toward oxygen evolution reaction and hydrogen evolution reaction, with overpotentials as low as 230 and 55 mV to achieve a current density of 10 mA cm-2 in alkaline electrolyte, respectively. Moreover, when assembled into a two-electrode configuration, the cell voltage of only 1.53 V is needed to drive the water-splitting cell at 10 mA cm-2.
Synthesis And Characterization Of Environment Friendly And Multifunctional Fe3o4 Magnetic Nanoparticles

Zijun Zhao,Hongli Zhao,Ronghua Yu,Huihui Yuan,Xiang Zhu,Minbo Lan

DOI: https://doi.org/10.1166/jnn.2012.5181

2012-01-01

Journal of Nanoscience and Nanotechnology

Abstract:In this study, the size-uniform (5-6 nm), nearly spherical, and well-dispersed aqueous Fe3O4 magnetic nanoparticles were prepared by an improved chemical coprecipitation method. The DDAT-terminated (S-1-Dodecyl-S'-(alpha,alpha'-dimethyl-alpha ''-acetic acid) trithiocarbonate) polymethacrylic (PMA-DDAT) was chosen as the apt surfactant, and the terminal DDAT can be used as a high efficient RAFT chain-transfer agent for further functionalization. Then, the functionalized Fe3O4 reacted with 4-amino-2,2,6,6-tetramethyl-piperidine-oxyl (4-NH2-TEMPO) to give the spin labeling magnetic nanoparticles. Finally, the multifunctional MNPs was characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), electron paramagnetic resonance (EPA), Fourier transform infrared spectrometer (FT-IR), and vibrating-sample magnetometer (VSM). The obtained highly water-soluble, superparamagnetic, and multifunctional magnetic nanoparticles should find potential applications in biomedical research.
Controlled synthesis of Mo-doped Ni<sub>3</sub>S<sub>2</sub>nano-rods: an efficient and stable electro-catalyst for water splitting

Zheng Cui,Yuancai Ge,Hang Chu,Robert Baines,Pei Dong,Jianhua Tang,Yang Yang,Pulickel M. Ajayan,Mingxin Ye,Jianfeng Shen

DOI: https://doi.org/10.1039/c6ta09853c

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Fabrication of stable, efficient, and inexpensive bifunctional electro-catalysts for water splitting has become increasingly attractive.

Water-Dispersible Fe3o4 Nanowires As Efficient Supports for Noble-Metal Catalysed Aqueous Reactions

Cobalt And Vanadium Co-Doped Feooh Nanoribbons: An Iron-Rich Electrocatalyst For Efficient Water Oxidation

Synthesis and Characterization of Fe−Fe2O3 Core−Shell Nanowires and Nanonecklaces

Electrocatalysis: Reduced Mesoporous Co3O4 Nanowires as Efficient Water Oxidation Electrocatalysts and Supercapacitor Electrodes (Adv. Energy Mater. 16/2014)

One-pot synthesis of hierarchical magnetite nanochain assemblies with complex building units and their application for water treatment

Sub-1 nm Nickel Molybdate Nanowires as Building Blocks of Flexible Paper and Electrochemical Catalyst for Water Oxidation.

Magnetic Field-Assisted Electrodeposition of Fe 3 O 4 Nanoparticles on Ni as Bifunctional Electrocatalyst for Overall Water Splitting

A General Route to Synthesize Water-Dispersive Noble Metal-Iron Oxide Bifunctional Hybrid Nanoparticles

FeNi3-Fe3O4 heterogeneous nanoparticles anchored on 2D MOF nanosheets/1D CNTs matrix as highly efficient bifunctional electrocatalyst for water splitting

From "Waste To Gold": A One-Pot Method To Synthesize Ultrafinely Dispersed Fe2o3-Based Nanoparticles On N-Doped Carbon For Synergistic And Efficient Water Splitting

Fe@Fe2O3 Core-shell nanowires as iron reagent. 1. Efficient degradation of rhodamine by a novel sono-fenton process

Preparation of Water-Soluble Magnetite Nanocrystals Through Hydrothermal Approach

Synthesis Of Porous Magnetic Ferrite Nanowires Containing Mn And Their Application In Water Treatment

A practical-oriented NiFe-based water-oxidation catalyst enabled by ambient redox and hydrolysis co-precipitation strategy

Catalysis: NiMo Solid Solution Nanowire Array Electrodes for Highly Efficient Hydrogen Evolution Reaction (Adv. Funct. Mater. 44/2019)

Alkoxide-intercalated NiFe-layered double hydroxides magnetic nanosheets as efficient water oxidation electrocatalysts

Direct Growth Of Porous Crystalline Nico2o4 Nanowire Arrays On A Conductive Electrode For High-Performance Electrocatalytic Water Oxidation

Preparation and characterization of water-soluble monodisperse magnetic iron oxide nanoparticles via surface double-exchange with DMSA

Activating Three-Dimensional Networks of Fe@Ni Nanofibers Via Fast Surface Modification for Efficient Overall Water Splitting.

Synthesis And Characterization Of Environment Friendly And Multifunctional Fe3o4 Magnetic Nanoparticles

Controlled synthesis of Mo-doped Ni<sub>3</sub>S<sub>2</sub>nano-rods: an efficient and stable electro-catalyst for water splitting