Abstract:Thermoforming is a process where the laminated sheet is pre-heated to the desired forming temperature before being pressed and cooled between the molds to give the final formed part. Defects such as wrinkles, matrix-smear or ply-splitting could occur if the process is not optimized. Traditionally, for thermoforming of fiber-reinforced composites, engineers would either have to perform numerous physical trial and error experiments or to run a large number of high-fidelity simulations in order to determine satisfactory combinations of process parameters that would yield a defect-free part. Such methods are expensive in terms of equipment and raw material usage, mold fabrication cost and man-hours. In the last decade, there has been an ongoing trend of applying machine learning methods to engineering problems, but none for woven composite thermoforming. In this paper, two applications of artificial neural networks (ANN) are presented. The first is the use of ANN to analyze full-field contour results from simulation so as to predict the process parameters resulting in the quality of the formed product. Results show that the developed ANN can predict some input parameters reasonably well from just inspecting the images of the thermoformed laminate. The second application is to optimize the process parameters that would result in a quality part through the objectives of minimizing the maximum slip-path length and maximizing the regions of the laminate with a predesignated shear angle range. Our results show that the ANN can provide reasonable optimization of the process parameters to yield improved product quality. Overall, the results from the ANNs are encouraging when compared against experimental data. The image analysis method proposed here for machine learning is novel for composite manufacturing as it can potentially be combined with machine vision in the actual manufacturing operation to provide active feedback to ensure quality products.

Application and Design of Artificial Neural Network for Multi-cavity Injection Molding Process Conditions

Multiobjective Optimization of Injection Molding Parameters Based on Soft Computing and Variable Complexity Method

Soft Computing Applied to Gas-Assisted Injection Molding Process Optimization

A Study on the Architecture of Artificial Neural Network Considering Injection-Molding Process Steps

Optimization of Process Parameters for Thin Plastic Shell Injection Molding Based on Neural Network and Genetic Algorithm

Application of Different Neural Network on Injection Molding Process Parameters

Artificial neural network-based online defect detection system with in-mold temperature and pressure sensors for high precision injection molding

Warpage Optimization in Injection Molding Using MPSO−HNN and MPSO Algorithm

Optimization and prediction of volume shrinkage and warpage of injection-molded thin-walled parts based on neural network

Shrinkage prediction of injection molded high density polyethylene parts with taguchi/artificial neural network hybrid experimental design

The Effect of Grouping Output Parameters by Quality Characteristics on the Predictive Performance of Artificial Neural Networks in Injection Molding Process

Application of artificial neural network in tool path pattern selection for die cavity machining

A Hybrid Back-Propagation Neural Network and Intelligent Algorithm Combined Algorithm for Optimizing Microcellular Foaming Injection Molding Process Parameters

Artificial Neural Network Modeling for Predicting Melt Blowing Processing

Multi-objective Optimization of Injection Molding Process Based on One-Dimensional Convolutional Neural Network and the Non-dominated Sorting Genetic Algorithm II

Warpage Optimization of Fiber-Reinforced Composite Injection Molding by Combining Back Propagation Neural Network and Genetic Algorithm

Adaptive adjustment of plastic injection processes based on neural network

Application of BP Networks Based on Genetic Simulated Annealing Algorithm for the Quality Prediction

The Application of Artificial Neural Network in Materials Fabrication Industry

Prediction and Optimization of Process Parameters for Composite Thermoforming Using a Machine Learning Approach

Neural Network Approach to Predict Melt Temperature in Injection Molding Processes