Abstract:Because they have the potential for ultra low NOx emissions and high efficiency, Homogeneous Charge Compression Ignition (HCCI) engines have the potential to develop a significant niche. However, a narrow operating range, (bracketed by severe knock and misfire problems), presents a formidable obstacle to developing usable HCCI combustion systems. HCCI combustion is influenced by a complex array of operating variables including fuel octane quality, intake preheating temperature, compression ratio, equivalence ratio, exhaust gas recirculation and engine component temperature. These variables affect the two critical combustion parameters: ignition timing and combustion duration. If these two parameters can be controlled by appropriate settings of the operating variables, a good HCCI combustion scheme could be achieved. Therefore, the theoretical prediction of these two combustion parameters as a function of the key operating variables is necessary for development of HCCI combustion. This paper describes a stand-alone, single-zone and multi-zone combustion model which have been developed for the specific purpose of investigating HCCI combustion control. In the multi-zone model, temperature and composition in each zone were adjusted in order to study the effect of in-homogeneity which is critical to understanding ignition timing and combustion duration in real HCCI engines. The models simulated HCCI combustion using two fuels: hydrogen, (11 species, 23 reactions- from CHEMKIN library), and natural gas, (53 species, 325 reactions- from GRI mech). The capabilities of the two models to predict ignition timing, combustion duration and peak pressure were verified against experimental and simulation results of Fiveland et al [2, 11]. The models were then used to study the effect of different in-homogeneity levels of equivalence ratio, intake temperature and residual fraction. The single zone model could only predict ignition timing while the multi-zone model shows the capability to mimic realistic HCCI combustion phenomena. The study showed that some degree of in-homogeneity is critical to predicting performance of the homogeneous charge compression ignition engine. Further, stratification of equivalence ratio was relatively ineffective at changing combustion while stratification of mixture temperature was very effective. Stratification of the residual fraction proved to be the most promising method of controlling combustion parameters and the mechanism was primarily thermal.

Multi–cylinder spark–assisted homogeneous charge compression ignition engine balancing control

Cylinder-to-Cylinder Variations in a V6 Gasoline Direct Injection HCCI Engine

Control of HCCI engine fueled with gasoline with electro-hydraulic variable valve system

Operating Characteristics of a Homogeneous Charge Compression Ignition Engine with Cam Profile Switching - Simulation Study

Homogeneous Charge Compression Ignition (HCCI) Combustion: Combustion Process and Control Strategies

Control system development for gasoline HCCI engine which based on heat management

New Gasoline Homogeneous Charge Compression Ignition Combustion System Using Two-State Direct Injection and Assisted Spark Ignition

A Comprehensive Decoupling Control Method for Gasoline HCCI Combustion

Cycle resolved control for HCCI engine load range expansion by combining ion current and pressure sensor

HCCI combustion control by injection strategy with negative valve overlap in a GDI engine

Real-time Control Oriented HCCI Engine Cycle-to-cycle Dynamic Modelling

Control of Homogeneous Charge Compression Ignition Combustion in a Two-Cylinder Gasoline Direct Injection Engine with Negative Valve Overlap

A Stand-Alone Multi-Zone Model for Combustion in HCCI Engines

A Modelling Study into the Effects of Variable Valve Timing on the Gas Exchange Process and Performance of a 4-Valve DI Homogeneous Charge Compression Ignition (HCCI) Engine

Effects of Spark Assisted HCCI on Combustion and Emissions in Multi-cylinder Gasoline Engine

Experimental and Computational Studies on Gasoline HCCI Combustion Control Using Injection Strategies

Numerical simulation of mixture formation and combustion of gasoline engines with multi-stage Direct Injection Compression Ignition (DICI)

Control of HCCI Combustion in a Two-Cylinder GDI Engine with Negative Valve Overlap

HCCI Engine Modeling for Real-Time Implementation and Control Development

Numerical Simulation of Homogeneous Charge Compression Ignition Combustion Using A Multi-Dimensional Model

Active Fuel Design-A Way to Manage the Right Fuel for Hcci Engines