Computational Analysis of Ammonia-Hydrogen Blends in Homogeneous Charge Compression Ignition Mode of Engine Operation
Yuchao Yan,Zhentao Liu,Jinlong Liu
DOI: https://doi.org/10.1016/j.psep.2024.07.102
IF: 7.8
2024-01-01
Process Safety and Environmental Protection
Abstract:Ammonia (NH3) 3 ) is considered a promising alternative fuel due to its renewable and carbon-free nature. The addition of hydrogen (H2) 2 ) significantly improves its flammability, making it suitable for use in internal combustion engines. The homogeneous charge compression ignition (HCCI) technique offers a practical solution for high-efficiency NH3-H2 3-H 2 operation, but it is not extensively discussed in existing literature. To enhance the understanding of NH3-H2 3-H 2 HCCI engines, this study employs a zero-dimensional model validated against experimental results to investigate engine efficiency and nitrogen oxides (NOx) emissions. The results indicate that an ammonia-dedicated HCCI mode would misfire at a 22:1 compression ratio and an engine speed of 1500 rpm if the intake pressure and temperature are insufficient. Hydrogen addition can help overcome the misfire issue and reduce the intake pressure and temperature required for combustion initiation. However, higher hydrogen addition ratios decrease thermal efficiency and increase NOx emission levels. In lean NH3-H2 3-H 2 HCCI operation, NOx emissions are primarily driven by fuel-borne mechanisms and peak at an equivalence ratio of around 0.5. A higher hydrogen addition ratio should be avoided as it increases the risk of ringing, thereby reducing the maximum allowable equivalence ratio and engine load. As a result, a moderate hydrogen addition ratio, such as 20 %, is preferable for NH3-H2 3-H 2 HCCI engines. Additionally, an equivalence ratio of approximately 0.3 is optimal, balancing multiple performance indicators such as thermal efficiency, NOx emission levels, and engine operating stability. These findings suggest that the operating range of NH3-H2 3-H 2 HCCI engines is limited, making them more suitable for off-road applications, such as power generation.