Abstract:1. Experimental Section Preparation of the glasses: The two kinds of glass samples used in our experiment were both prepared by the melting-quenching technique. Initially, the glasses without AgNO3 (NAG) were prepared using the following composition: 66SiO2-8B2O3-18K2O-6ZnO-1ZnS-1PbO (in mol %). The mixture of analytical grade raw materials SiO2, B2O3, K2CO3, ZnO, ZnS and PbO were melted at 1450 oC in an alumina crucible for 90min under ambient conditions, quenched in a preheated brass mold and annealed at 400 oC for 1 h. As to the other kind of glass, when melting extra 20 ppm (in mol %) AgNO3 (AG) was added in compared to the first kind of glass and the fabrication process is the same with the glass without AgNO3. Heat-treatment of the as-prepared glasses and its characterizations: The as-prepared two kinds of glasses both with slight yellow color were cut and further annealed at 540 oC, 560 oC and 580 oC for different durations. After heat treatment, the samples were cooled to room temperature inside the furnace and then polished into a plate of 1 mm thick to make further characterizations. The photoluminescence spectra were measured on a Triax 320 spectrometer (Jobin-Yvon Co., France) with a resolution of 1 nm, which were excited by a 976 nm laser diode (LD) and detected with a PbSe photodetector. Optical transmittance spectra of glass composites were recorded on a UV/VIS/NIR spectrophotometer (Lambda-900, Perkin-Elmer, USA). The confocal Raman spectra from the heat treated samples with a 785 nm laser as the excitation source were measured by a

Formation and Selective Micron-Regional Control of PbS Quantum Dots in Glasses Using Femtosecond Laser Pulsation

Formation and selective micron-region control of PbS quantum dots inside glasses using femtosecond laser pulses

An optical fiber glass containing PbSe quantum dots

Nanoconfined Synthesis of Lead Sulfide Quantum Dots Embedded in Mesoporous Aluminosilicate Glass with Adjustable Near-Infrared Broadband Luminescence

Controllable fabrication of novel all solid-state PbS quantum dot-doped glass fibers with tunable broadband near-infrared emission

Broadband near-infrared luminescence and tunable optical amplification around 1.55 μm and 1.33 μm of PbS quantum dots in glasses

Formation, near-infrared luminescence and multi-wavelength optical amplification of PbS quantum dot-embedded silicate glasses

The Effect of ZnS/ZnO on the Formation, Luminescence and Optical Amplification of PbS Quantum Dots Doped Glasses

Formation, Element-Migration and Broadband Luminescence in Quantum Dot-Doped Glass Fibers

Modulating the local structure of glass to promote in situ precipitation of perovskite CsPbBr3 quantum dots through introducing a network modifier

Energy transfer process and temperature‐dependent photoluminescence of PbS quantum dot‐doped glasses

Tunable Infrared Luminescence and Optical Amplification in PbS Doped Glasses

Direct Lithography of Perovskite Quantum Dots Inside an Organic Transparent Medium

Strongly Inhibited Spontaneous Emission of PbS Quantum Dots Covalently Bound to 3D Silicon Photonic Band Gap Crystals

Space-selective Precipitation and Control of Functional Crystals in Glasses by a Femtosecond Laser

Matrix Manipulation of Directly‐Synthesized PbS Quantum Dot Inks Enabled by Coordination Engineering

Laser Irradiation-Induced Two-Photon Photolysis of Sulfates for Photoluminescent Sulfur Quantum Dots

Unlocking the High Photosensitivity Direct Laser Writing: Designing Structures and Observing Atomic Clustering in Glass

Engineering CsPbX 3 (X = Cl, Br, I) Quantum Dot-Embedded Borosilicate Glass through Self-Crystallization Facilitated by NaF as a Phosphor for Full-Color Illumination and Laser-Driven Projection Displays

Laser irradiation induced two-photon photolysis of sulfate for photoluminescent sulfur quantum dots

Solid state synthesis of CdS quantum dots through laser direct writing