Abstract:1. Experimental Section Preparation of the glasses: The two kinds of glass samples used in our experiment were both prepared by the melting-quenching technique. Initially, the glasses without AgNO3 (NAG) were prepared using the following composition: 66SiO2-8B2O3-18K2O-6ZnO-1ZnS-1PbO (in mol %). The mixture of analytical grade raw materials SiO2, B2O3, K2CO3, ZnO, ZnS and PbO were melted at 1450 oC in an alumina crucible for 90min under ambient conditions, quenched in a preheated brass mold and annealed at 400 oC for 1 h. As to the other kind of glass, when melting extra 20 ppm (in mol %) AgNO3 (AG) was added in compared to the first kind of glass and the fabrication process is the same with the glass without AgNO3. Heat-treatment of the as-prepared glasses and its characterizations: The as-prepared two kinds of glasses both with slight yellow color were cut and further annealed at 540 oC, 560 oC and 580 oC for different durations. After heat treatment, the samples were cooled to room temperature inside the furnace and then polished into a plate of 1 mm thick to make further characterizations. The photoluminescence spectra were measured on a Triax 320 spectrometer (Jobin-Yvon Co., France) with a resolution of 1 nm, which were excited by a 976 nm laser diode (LD) and detected with a PbSe photodetector. Optical transmittance spectra of glass composites were recorded on a UV/VIS/NIR spectrophotometer (Lambda-900, Perkin-Elmer, USA). The confocal Raman spectra from the heat treated samples with a 785 nm laser as the excitation source were measured by a

Formation, near-infrared luminescence and multi-wavelength optical amplification of PbS quantum dot-embedded silicate glasses

An optical fiber glass containing PbSe quantum dots

PbSe Quantum-Dot-doped Broadband Fiber Amplifier Based on Sodium-Aluminum-borosilicate-silicate Glass

Broadband near-infrared luminescence and tunable optical amplification around 1.55 μm and 1.33 μm of PbS quantum dots in glasses

Tunable Infrared Luminescence and Optical Amplification in PbS Doped Glasses

The Effect of ZnS/ZnO on the Formation, Luminescence and Optical Amplification of PbS Quantum Dots Doped Glasses

Broadband Optical Amplification of PbS Quantum‐Dot‐Doped Glass Fibers

Formation, Element-Migration and Broadband Luminescence in Quantum Dot-Doped Glass Fibers

Nanoconfined Synthesis of Lead Sulfide Quantum Dots Embedded in Mesoporous Aluminosilicate Glass with Adjustable Near-Infrared Broadband Luminescence

Controllable fabrication of novel all solid-state PbS quantum dot-doped glass fibers with tunable broadband near-infrared emission

High efficiency luminescence from PbS quantum dots embedded glasses for near-infrared light emitting diodes

Effect of Topological Structure on Photoluminescence of PbSe Quantum Dot‐doped Borosilicate Glasses

Tunable Near-Infrared Emission and Fluorescent Lifetime of PbSe Quantum Dot-Doped Borosilicate Glass

Formation and selective micron-region control of PbS quantum dots inside glasses using femtosecond laser pulses

Modulation of Optical Properties for Lighting Applications Based on CsPbBr3_xIx Quantum Dot Doped Glasses

Strategies to host silver quantum clusters in borosilicate glass: How to mutually fulfill PL efficiency and chemical stability?

Linear and Nonlinear Optical Characteristics of CsPbBr3 Perovskite Quantum Dots-Doped Borosilicate Glasses

Formation and Selective Micron-Regional Control of PbS Quantum Dots in Glasses Using Femtosecond Laser Pulsation

Energy transfer process and temperature‐dependent photoluminescence of PbS quantum dot‐doped glasses

Regulation of Bismuth Valence in Nano-Porous Silica Glass for Near Infrared Ultra-Wideband Optical Amplification

Broadband near-infrared emission covering S+C+L in Er3+-doped nanocrystal modified PbO-PbF2-Bi2O3-Ga2O3 glasses